How Wide Is An Interior Door

Standard Door Size 101: Important Measurements All Homeowners Should Know

Image courtesy of

Q: We just purchased a home that was built in the 1960s and will be remodeling to bring it up to date. Our plans include adding some new doors, and we’re wondering what sizes will work best. Are there any standard door guidelines?

A:Congratulations on your recent acquisition of a residence! Because many older homes were built before local building rules were established and because doors were typically fashioned by hand, not all older homes have doors of the same size as one another. Doors are now available in regular sizes, and they can be found at DIY stores and home improvement centers around the country. Additionally, many retailers sell a variety of different door sizes that may be utilized in specific regions of the house in addition to the usual ones.

There are standard door sizes and some alternates available.

Interior doors are available in a variety of standard heights, widths, and thicknesses, which are as follows:

  • Interior doors are typically 80 inches in height, according to industry standards. For doors leading from one room to another, this is the most common height for passage doors. Due to the fact that an 80-inch door is 6′ 8″ tall (pronounced “six-eight”), it is referred to as a 6/8 door (pronounced “six-eight”). A slightly shorter 78-inch door is also available for immediate delivery. It is referred to as a 6/6 door, and it is designated for closet and utility doors. The standard door width for interiors is 32 inches in height and width. For a passage door, this is the minimum width that must be met. You might also be able to locate some thinner doors in stock, such as 30 inches, 28 inches, and 24 inches in width. If you need a closet or utility door, these smaller widths are permitted by code
  • You may be able to obtain 36-inch-wide doors on hand. Wider choices that comply with the Americans with Disabilities Act (ADA) are a popular choice for homes with people who have mobility challenges. The inner thickness is 13.8 inches on average. Generally speaking, this is the most popular interior door thickness, and it is often the only one available at home improvement stores. Some businesses may have doors in stock that are 112 inches thick and 134 inches thick alternately. The walls of these are slightly thicker than the norm, and they are frequently insulated or made of hardwood. Interior door jamb thickness on pre-hung doors is 4-9/16 inches as a general rule of thumb. The door jamb is the frame that attaches to the wall and provides support for the door through the use of hinges. When installed in a standard two-by-four wall (which is actually made up of studs that are 112 inches by 312 inches in size), this thickness is intended to provide adequate insulation. The thickness of an alternate jamb is 6-9/16 inches. It is intended to be used with two-by-six walls (which are really formed from studs that measure 11 1/2 inches by 5 12 inches)

Some tasks are best left to the professionals. Locate licensed contractors in your region and receive free, no-obligation estimates for your job by filling out the form on this page. + Image courtesy of

Measuring for a new door is a simple process.

The majority of the time, when purchasing a door, you’ll want one that is pre-hung, which means it comes with the frame (jamb) already attached. The other form of door, known as a “slab door,” is distinguished by the fact that it has simply the door and no frame.

Measuring for a Pre-Hung Door

  1. To find out where the sides of the door will fit when it is closed, open the door and take a measurement from the inside of one jamb tothe inside of the opposite jamb (see illustration). Make a note of the number
  2. While the door is still open, take a measurement from the top of the jamb on the inside (where the door would fit when closed) to the bottom of the door. Make a subtraction of 34 inch and put the result down. Flooring allowance is represented by a 34 inch deduction. Take a measurement of the thickness of the door itself and write the result down on paper. When you go to the home improvement center, make sure to have all three numbers with you.

Measuring for a Slab Door

  1. To determine the width, height, and thickness of a slab door to replace, do not measure the jamb—measure the door itself.

Image courtesy of

Choose a pre-hung door with slightly smaller measurements.

A skilled carpenter (you’ll need at least basic carpentry abilities to hang a door) may then use this method to fit the new door frame into the rough opening that was previously used to hold the old door. It’s not uncommon to have to use a few shims to get a snug fit. It is best to avoid purchasing a pre-hung door that is slightly larger in size than your old door if you are doing the work yourself. It would be necessary to remove a section of the rough-in frame (in the wall) in order to fit the door jamb, and because this would modify the load-bearing structure of the wall, it would be best left to a professional.

Or, select a slab door with slightly larger measurements.

If you’re simply changing the door and not the jamb, you’ll wind up with gaps between the door and the jamb if you get a smaller door. Instead, purchase a slab door that is somewhat bigger in size than the current door and then shave it down to the precise size of the old door. Fitting a slab door as a do-it-yourself job will take time since it needs accuracy to form the indentions needed to fit the hinges and install a new strike plate that is properly matched to the old door. While installing a slab door may appear to be less complex than installing a pre-hung door, it is really more complicated.

If you want more wall space, consider a narrower door.

Large doors may be overwhelming in tiny spaces, so if you have a limited amount of available space, a smaller door can create a cleaner aesthetic while also adding wall space. Removal of the existing door and jamb, as well as reconfiguration of the rough-in frame in the wall, is required in order for a new pre-hung door to suit the available space. This project is well within the capability of a do-it-yourselfer with a rudimentary understanding of carpentry.

Consider remodeling with wider doors if your home’s doors are too narrow.

When upgrading an older property, it may be necessary to enlarge entrances since it can be difficult (if not impossible) to carry heavy furniture through them in the first place. There are a few 36-inch doors available in stock, but your best chance is to purchase bespoke doors from a home center or building supply store.

Because the rough-in opening in the wall will have to be increased in size, it is recommended that a professional install these doors for you. RELATED: Weekend Projects: 5 DIY Door Designs to Get You Started

You can also order a custom size pre-hung door.

If your measurements don’t quite match the normal size for doors available at the shop, but you aren’t willing to extend or narrow the existing door frame, know that manufacturers will custom-make pre-hung doors to your exact requirements at no additional cost. This option ensures that your door will fit exactly in its jamb and will open and close with ease when you do so. Using this method, you may remove the old door casing and trim, install the new door, and then replace the original casing and trim, painting or staining the new door to match the old.

Entry doors are usually 36 inches wide.

However, while a door width of 36 inches is considered excessive for an interior door, it is considered conventional for front doors. The standard height, which is 80 inches, stays the same, however, as before. Additionally, the majority of entry doors are slightly thicker than interior doors, with a normal thickness of 134 inches. These somewhat wider doorways make it easy to bring in huge appliances and furniture pieces into the house without difficulty. For two-by-four and two-by-six wall framing, standard jamb thicknesses are similar to interior door jamb thicknesses, measuring 4-9/16 inches or 6-9/16 inches, respectively, to fit the walls.

+ Find qualified, licensed contractors in your area and receive free, no-obligation estimates for your job.

What is the Standard Door Size for Residential Homes?

When purchasing a door, there are a number of aspects to consider. Which kind of door do you prefer? Do you want a slab door or do you want a pre-hung door? Is it better to have an out swing or an in swing? Once you have obtained this information, you will need to begin measuring your results. If you don’t know what you’re doing, measuring a door and its frame can be a frustrating experience. Here are some useful measurement methods to follow, as well as some fundamental facts about typical door sizes.

Standard Size for Exterior Doors

Generally speaking, the conventional size for an outside door is 80 inches by 36 inches, which is 6 feet, 8 inches by 3 feet in length. Modern homes are increasingly being built to the length of 96 inches (8 feet), with standard-width stock exterior doors available in 30 and 32-inch widths. Some door manufacturers offer doors in heights ranging from 7ft to 8ft and widths ranging from 24 inches to 42 inches. The height of fiberglass or steel doors is fixed at 6 ft. 8 inches or 8 ft. tall, respectively, depending on the material.

  1. 80″ is the most popular size.
  2. 109″ or higher is also prevalent.
  3. The majority of the time on double door systems 32″ is commonly used in double door systems.
  4. 42″ is a standard size for newer modern homes.

Standard Size for French Doors

Generally speaking, the conventional size for an outside door is 80 inches by 36 inches, which is 6 feet, 8 inches by 3 feet in length. Modern homes are increasingly being built to the length of 96 inches (8 feet), with standard-width stock exterior doors available in 30 and 32-inch widths.

Some door manufacturers provide doors in heights ranging from 7ft to 8ft and widths ranging from 24 inches to 42 inches. The height of fiberglass or steel doors is fixed at 6 ft. 8 inches or 8 ft. tall, respectively, depending on the material. The thickness of a conventional door is 1 3/4 inch.

Standard Size for Sliding Glass Doors

A great deal of natural light enters the house through these types of patio doors. They are the most widely used and least expensive type of patio door available today. This sort of patio door glides in a parallel motion, which makes it convenient for residents to enter and exit the house quickly and easily. The greatest spot to put sliding doors would be on a patio or deck, depending on your preferences. A sliding glass door is typically 6’8″ high and 6′ wide, which is the industry standard.

You should keep in mind that the size of these doors varies depending on the manufacturer.

Standard Size for Interior Doors

All passage doors must have a minimum height of 80 inches, and the standard widths for interior doors are 24″, 28″, 30″, 32″, and 36 inches in width. The minimum suggested door width to allow for the passage of people with impairments is 36 inches. The standard thickness for an interior door is 1 3/8 inches; however, if your door is wider than 36 inches or taller than 90 inches, the recommended thickness for that door is 1 3/4 inches. The chart below contains a list of widths and heights, as well as a description of what those sizes are typically used for.

1′-3″ 1′-6″ 2′-0″ 2′-4″ 2′-6″ 2′-8″ 3′-0″
6/8 Used for bi-fold doors Used for bi-fold doors Used for bi-fold doors Used for bathroom doors Used for bathroom doors Used for bedrooms Used for bedrooms
7/0 Used for bi-fold doors Used for bi-fold doors Used for bi-fold doors Used for bathroom doors Used for bathroom doors Used for bedrooms Used for bedrooms
8/0 Used for bi-fold doors Used for bi-fold doors Used for bi-fold doors Used for bathroom doors Used for bathroom doors Used for bedrooms Used for bedrooms

Standard Size forCloset and Utility Doors

Generally speaking, utility and closet doors have narrower passages than standard doors. Doors in homes built prior to 1990 might be as small as 18 inches in some instances. Newer models are typically 30 inches wide and 96 inches tall, with a standard width of 30 inches.

How to Measure your Door Properly

If you want to replace a door that you already have, take measurements from top to bottom of the present door. Continue by taking measurements from the left to the right side of the door. In addition, you should take note of the thickness of the door. The majority of doors have a thickness of 1 3 4 inches. It’s important that your door doesn’t deviate significantly from that measurement. The width of the door jamb as well as the height and breadth of the frame are equally vital to take into consideration.

The next step is to increase the width and height of the door by 2 inches, respectively, to allow for a proper entryway opening.

Whether or whether you are utilizing a pre-hung door, you will need to take a rough-in measurement.

See also:  How To Start Your Own Interior Design Business

What Is the Standard Interior Door Width? – Buying Interior Doors

Are you contemplating the purchase of an internal door for your home? There are a number of factors you should take into consideration before proceeding. The size, style, color, and design of the door are just a few examples of these considerations. However, when it comes to door size, it’s critical to be certain that you acquire the correct measurement. You’ll need to know how to use a measuring tape in order to be able to accurately measure both the door and the frame for this.

If you are an individual who does not have access to a measuring tape or who has never used one before, it is recommended that you get some guidance from a trained specialist.

Standard interior door frame width

I’m wondering what the normal sizes are for inside doors. All internal passage doors must be a minimum of 80 inches tall to be considered safe. Taller doors are available if desired, however it is crucial to remember that taller doors must often be purchased in advance and will cost significantly more. This may be important if you have a tall member of the family living in your home. If you’re looking for width, the normal widths range from 24 to 36 inches in width. Closets and tiny bathrooms, for example, have a width of around 30 inches, whereas doors that are handicap accessible often have a width of approximately 36 inches.

It’s important to note that most of the furniture available today will not fit through a doorway that is less than 30 inches wide when determining the width of the passage.

Not being able to fit newly purchased furniture through the doorway is one of the most irritating experiences a person can have.

Despite the fact that this measurement might vary in size, it is preferable not to go too far from it.

Utility, closet, and storage rooms

A narrower passageway is common in utility, closet, and storage rooms, as opposed to a standard inside doorway. When these doors were first introduced in the 1990s, they might be up to 18 inches wide. That’s a little too narrow. However, today’s normal width for utility, closet, and storage rooms is around 30 inches, with a height ranging from 80 to 96 inches at the very least.

Pre-hung doors vs. slabs or blanks

Interior doors are available in two distinct configurations. Pre-hung doors refer to internal doors that are sold with frames attached to them. The terms “banks” and “slabs” refer to the fact that they are offered without their frames. If you already have a door frame and are satisfied with the size, you may want to consider purchasing a slab to replace it. Pre-hung doors, on the other hand, are the better option if you want to be able to modify the height and breadth of the frame at the same time.

The reason for this is the convenience it provides as well as the labor money it saves a contractor.

In addition to this, pre-hung doors include hinges that are integrated into the margins of the door frame.

Pre-hung pros

The hinges have already been installed.

The framework has already been established. It is not essential to cut mortises in the wood. Overall, there is less work.

Pre-hung cons

There is a possibility that the door will not fit properly. It has a substantial amount of weight to it. It’s difficult to work with. It is possible that the door will become twisted within the frame if you do not exercise caution.

Slab door pros

It is significantly less expensive. Design that is adaptable. Installing vintage doors is a simple process.

Slab door cons

Carpentry labor may be required for a number of hours. It is difficult to achieve a smooth swing. You’ll need to make mortises in the wood. Before placing your order for a pre-hung interior door, make certain that you know the thickness of the wall on one side, the size of the holes for the lockset, and the placement of the holes, among other things. Before placing your order for your pre-hung inside door, you will need to provide these specifics.

Flush vs. panel doors

Interior doors are available in two designs: flush and panel. Flush doors are distinguished by having a smooth, level surface on the inside and outside. The surface is either painted or stained, and it complements a wide range of interior design styles. Most flush doors include a solid foam core in the middle, which helps to keep the door from warping in extremely cold or hot weather. Flush doors are really trendy these days. In reality, they’ve been in millions of households for more than 50 years and continue to be so.

  1. Panel doors are constructed in a somewhat different manner.
  2. On occasion, they are also employed for the installation of glass panels.
  3. Why?
  4. Consequently, if you live in a humid climate, panel doors may be a good option for you to consider for your residence.
  5. The reason for this is that they are entirely solid and do not distort as easily when exposed to damp environments.
  6. MDF is a strong material that will not warp readily in humid conditions, and it is also considerably more affordable.
  7. MDF doors are pre-primed and ready to be painted when they are delivered.

Different types of interior doors

It is possible to find many various types of interior doors, and the thing that distinguishes them all from one another is the method in which they are operated. With the exception of pocket doors, all of their frames are made in the same manner. A few illustrations are provided below.

Folding doors

Folding doors are typically utilized when there is a large opening between two doors. They are normally constructed from the same materials as swinging doors, however they are utilized in situations when swinging doors are not acceptable.

Folding doors are attached to a track and operate by sliding and opening up on hinges as needed. For bi-folding doors, the usual height is around 80 inches, and the total width ranges from 24 to 72 inches.

Hinged doors

The most prevalent type of door is the hinged door, which is seen in almost every modern home. Most of the time, they have a hinge on one side. The majority of hinged doors are constructed with two vertical stiles and two horizontal rails. The lock on a hinged door is always located on the lock stile, and the hinges are always located on the hinge stile when the door is hinged. A minimum height of 80 inches is required by most employers. The width of the door must be between 24 and 36 inches, and the normal thickness of the door must be at least 1-3/8 inches.

Bypass doors

Bypass doors are typically seen in closets, laundry rooms, and tiny pantries, to name a few applications. These doors are made of lightweight materials, hang from an overhead track, and move back and forth with the help of rubber rollers. Bypass doors are typically constructed in three sections. Whenever you open a door, the three portions of the door bypass each other and allow you to enter the closet.

Wall-mounted barn doors

Wall-mounted barn doors are frequently used in the construction of homes in order to conserve space. These doors are designed to be installed flush against a wall and to move back and forth on a track. The track is typically 48 to 96 inches in length and is made of metal construction. They are available in a variety of designs and have a highly fashionable appearance. What’s the best part? Barn doors that are installed on the wall are reasonably priced. Similarly to the other doors, your barn doors must be a minimum of 80 inches tall, 24 to 36 inches wide, and a minimum thickness of 1-3/8 inches.

Pocket Doors

Pocket doors are the ideal solution for spaces that are limited in space. Pocket doors are a type of door that slides into and out of a pocket in the wall. Pocket doors, out of all the interior doors listed here, are the ones that save the most floor space. Pocket doors have a somewhat different frame than other types of doors. The frame is made up of a side jamb and a top jamb, both of which have a track linked to them. At the top of the door are rollers, which allow it to glide back and forth with ease as it opens and closes.

When it comes to standard sizes, pocket doors are typically the same as the rest of the doors.

Choosing the right interior door

In order to select the best interior door for your space, you’ll want to start by considering the overall design and feel of the area. You want a theme that is constant across the space. Pocket doors, for example, are ideal for use in small, snug spaces such as wine cellars, closets, and laundry rooms, among other places. Yet another thing you’ll want to think about is how big the room is. In situations when there is a lack of available space, folding doors, wall-mounted barn doors, and pocket doors are all excellent options.

  • Hinged doors are also more visually appealing in larger spaces.
  • What type of material is my flooring made of?
  • What is the height of the ceiling in my house?
  • How much space is available on the bus?
  • Choosing a hinged door will need you to determine which way the door will swing if you do decide to go with one.
  • Consider the following suggestions if you’re having trouble choosing whether the door should swing outward or into the room: The door to a bedroom is often hinged and swings into place.

Closets, laundry rooms, and other tiny rooms, on the other hand, are almost often equipped with doors that open outwards. Do what works best for your family and what makes you feel the most comfortable in your own home.

Decide on a specific material

The materials used to construct doors come in a variety of shapes and sizes. Solid wood, glass, MDF, metal, and even laminate are some of the materials from which you may pick. The type of material you choose for your door depends on a number of factors, which you should consider before making your final selection. To begin, select a material that complements the overall design of the room. You may want your door to be created from the same type of wood as the rest of the room, for example, if there is a lot of hardwood flooring throughout the area.

  1. Sunrooms, kitchens, and pantries all benefit from the use of glass doors.
  2. Sound from conversations, music, and other sources of disturbance is muffled by solid wood, allowing for greater seclusion.
  3. It is not uncommon for hard woods such as oak, cherry, and walnut to be highly pricey.
  4. Compared to solid wood doors, hollow wood doors are significantly less costly and less taxing on the bank account.

Properly framing your door with castings

If you do opt to purchase a slab door, you will be responsible for framing the door yourself. It will not only make the door stand out, but it will also add to the overall elegance of the room if it is cast in the appropriate way. If your door has a sophisticated design, it is best to utilize a simple casting as a rule of thumb. Similarly, if the door design is basic, a difficult casting should be used. Having two intricate designs that bounce off one other is not a good thing.

Why is it important to get the right size interior door?

There are a number of reasons why choosing the proper interior door size for your home is critical to its success. If your internal door is too large, it will, without a doubt, not fit. Alternatively, if your inside door is too tiny, you may notice a gap around the perimeter of the door. Noise and scents are able to quickly pass from one room to another through this opening. You’ll also have a limited amount of privacy. Another reason why it’s critical to choose the proper interior door size is that a mismatched door might detract from the overall design and appearance of the space.

If you simply want to heat specific areas of your home, then having the proper-sized internal doors is critical to your success.

Measuring your door right

It’s critical to accurately measure your door in order to ensure that it will fit correctly when installed. Failure to do so will only result in unwelcome consequences down the road. To ensure that you are accurately measuring your door, first get some scratch paper and a writing implement before following the steps listed below:

  1. From the bottom to the top of the door you’re replacing, take measurements. From right to left, measure the width of the door. Now, take a measurement of the thickness. The thickness of the door should be around 1-3/8 inches. Locate the door jam and take its measurement
  2. Take the height and breadth of the door frame into consideration. Do not include the trim in your measurements
  3. Instead, subtract it.

Once you’ve gathered your measurements, you’ll need to increase the width measurement by 2 inches and the height measurement by 2 inches.

There’s no difference between utilizing a pre-hung door and not, and you should always do this when installing a door. For example, if your measures are 32 x 34, they will be 34 x 36 after the transformation.

A final thought

The standard inside door width, height, and thickness are all determined by the manufacturer. In most cases, doors are at least 80 inches tall, but they can be as tall as 96 inches in other cases. Similarly, interior doors range in width from 24 to 36 inches and are 1-3/8 inches thick. The fact that most furniture will not fit through a doorway that is less than 30 inches wide should not be overlooked. Give yourself at least 34 inches of clearance to be on the safe side. You’ll spare yourself a lot of heartache in the long run.

  1. This involves increasing the height and breadth by two inches in order to achieve more precision.
  2. In addition to this, you’ll want to take into account the degree of humidity in your geographic location as well.
  3. High humidity causes panel doors to warp less than flush doors, hence panel doors are preferable in this situation.
  4. Finally, you’ll need to determine whether to get a pre-hung door or a slab door for your new home.
  5. Pre-hung doors will save you the time and effort of having to construct the door’s frame from scratch.
  6. It is possible to assure that a slab door will fit exactly and snugly with slab doors.
  7. Thomas Luttrell has been in the homebuilding industry since 2002, specializing in the construction and renovation of residential properties.
  8. Thomas Luttrell’s most recent blog entries (see all)
See also:  What Happens If You Use Interior Paint Outside

Standard Inside Door Sizes

In most cases, the International Residential Code does not specify that an interior door must be as large as the main entry door of a home, but it does specify minimum height and width requirements for interior doors. As a result, the majority of standard interior doors are the same height and are available in widths ranging from 28 to 32 inches.

Width and Height

Of most cases, the International Residential Code does not specify that an interior door must be as large as the main entry door in a home, but it does provide minimum height and width standards for interior doors. Most ordinary interior doors are therefore identically tall, and their widths range from 28 to 32 inches in length.


When it comes to fitting doorknobs and hinges on interior doors, the thickness of the door is an essential concern.

It is possible to purchase interior doors that are as thin as 1 3/8 inch in thickness and as thick as 1 3/4 inch in thickness, which is the same thickness as an outside door. The thicknesses of 1 1/2 and 1 5/8 inches are considered intermediate.

What Are Standard Interior Door Sizes?

Whether you’re building a new home or investing in a remodeling project, there are numerous considerations to make before purchasing any building supplies or materials. Furthermore, selecting the right door shape, color, and design can be a difficult task, especially if you have a specific style in mind. Even with all of the factors to consider when purchasing a new residential door, there is one more element to consider that you may not have considered: the conventional interior door sizes. It is critical to understand standard interior door sizes in order to select a door that is appropriate for your home.

A common problem for many homeowners is that they aren’t aware of the conventional interior door measurements, making it difficult to measure a door and its frame.

How to Properly Measure Your Interior Door

Before we get started, let’s go through how to properly measure your standard interior door dimensions. Typically, an inside door may be found in a bedroom or bathroom. You may be able to install an inside door between rooms or at the top of a stairway in some situations. When measuring an interior door, there are several common principles that will always be followed:

  • Standard inside doors must always be at least 80 inches tall, if not more. Based on the size of the doorway and the materials you want to use, a standard width can range from 24″ to 36″ in width. It is recommended that the minimum width of a doorway be 36 inches when creating an accessible entryway.

When it comes to the thickness of the door, it might vary depending on the material you use to construct it. While the majority of interior doors are 1 3/8 inch thick, there are those that can be thicker if the door’s height and breadth are very large.

Additional Considerations Before Starting Your Measurements

Whenever you’re replacing a door in an existing doorway, you’ll want to take extra steps to ensure that all of the door’s components are accurately measured. A decent rule of thumb is to start from the top and work your way down, being sure to measure everything along the path. This comprises the height, breadth, thickness, door jamb width, and the size of the frame you intend to replace, among other things. When acquiring a new door from a vendor or manufacturer, you will almost certainly be required to give the measurements in advance of the purchase.

This is important since you do not want the merchant to deliver you the incorrect size!

Standard Interior Door Sizes

The majority of interior door sizes can be compared to the sizes of exterior doors (the front door of your house, for example). Having said that, the majority of interior doors are sized in accordance with the standard interior door sizes listed above. If your door is wider than 36 inches in width and taller than 90 inches, it is deemed to be bigger than the norm. In that case, a thicker door (approximately 1 34 inch thick) is also recommended. When you invest in a remodeling project, you typically have a certain amount of latitude when it comes to adjusting the door heights in the various rooms of your house to your liking.

The width of your doorway is a measurement of the horizontal space available.

The most significant criteria that should be observed is the height requirement.

Because conventional interior doors are commonly referred to as 6/8 doors, they measure 6 feet and 5 inches in length and height respectively.

When installing new hinges and doorknobs, it is especially important to consider the thickness of the material. As previously stated, the thinnest door available will measure 1 3/8″ in thickness – but some doors can be made to be 1 1/12″, 1 5/8″, or 1 3/4″ thick.

Interior Double Door Sizes

An exquisite addition to your master bedroom, dining room, or living space may be achieved by installing inside double doors on the inside. Furthermore, double doors are always identical in terms of width, height, thickness, and design when they are installed side by side. Due to the fact that everything must be measured twice when measuring a double door, you must exercise extra caution when measuring one. In addition, the frame will be measured differently. For double interior doors to function properly, the frames must have two sides and a space in the centre to allow for separation of the doors.

It’s critical to understand that your measurements must be as exact as possible in order for these types of doors to be placed correctly and efficiently.

The following are the most typical widths for internal double doors, according to the manufacturer: Following the normal indoor height of 80″, this is consistent with the industry.

Interior Bedroom Door Sizes

Bedroom doors are a little more fascinating than other basic interior doors since they do not have a particularly set size like other standard interior doors. Making a customized bedroom door does not require adhering to any certain specifications or rules of construction. Instead of concentrating on standard measures, you should concentrate on the overall architectural direction of the home in this instance. However, if you opt to select a manufacturer that currently has doors in stock, you will be able to choose from a set of standardized sizes.

Furthermore, while 80″ is the standard height for bedroom doors, you may easily install a door that is higher or lower than that.

Interior French Door Sizes

French doors are always in high demand in traditional country-style homes. These are double doors that are completely mirror images of one another, opening in opposite directions from one another, and are frequently used as a divider between rooms or as a connection between the kitchen and the garden. In most cases, one of the doors has a handle and lock, while the other contains movable hardware elements that allow the door to open and close independently. French doors, particularly those that lead to an exterior area, are typically 80″ tall by 36″ wide per door, according to industry standards.

Interior French double doors are typically 1 34 inch thick, which is the industry standard.

Interior Door – Rough Opening Sizes

First and foremost, you must ensure that the rough opening for your newly-measured and custom-built internal door is the proper size before proceeding with the installation. This is the stage of the door installation procedure that most homeowners and do-it-yourself enthusiasts find frustrating. When it comes to measuring the rough opening in order to correctly prepare it for the door frame, it might be difficult if you aren’t aware of the measures that should be taken. Remembering how to structure your rough introduction is actually rather straightforward if you follow a basic rule.

You will need an extra 2″ for width and 2 12″ for height after you’ve measured the width of the real door to get the measurements you need to correctly set up your rough opening. The following is a simple rough opening chart to assist you in obtaining rapid measurements:

Size of Door Size of Rough Opening
24” x 80” 26” x 82 ½”
28” x 80” 30” x 82 ½”
30” x 80” 32” x 82 ½”
32” x 80” 34” x 82 ½”
34” x 80” 36” x 82 ½”
36” x 80” 38” x 82 ½”

You should also consider how to measure entrances that are narrower or more irregular in shape. Doors for closets and utility shelves, for example, are frequently narrower and thinner than other interior doors on the same level. Modern utility doors are around 30 inches wide, but if you have an internal door that is more than 30 years old, it may be as thin as 18 inches in thickness. Closet doors are typically 96″ in height, which is standard.

Things To Consider Before Choosing Your Ideal Interior Door

When it comes to installing a new inside door, like with many other areas of any remodeling project, you must first determine your priorities and wishes before proceeding. In the following section, we’ll go over the most important elements to consider when choosing on the type of new inside door you want to purchase. Formality against functionality: which is more important to you, form or function? Some doors are made to look like beautiful pieces of furniture in the home. Others are just functional, with nothing particularly attractive about them at all.

  • Swinging doors are becoming increasingly popular since they provide an alternative to standard doors.
  • Additionally, if you do not have much available room, a sliding door may be the finest alternative for you to consider.
  • M aterials What kind of materials do you want to use to construct your door?
  • Take a look at the modern interior door market to discover what sorts of high-quality materials you like for your house.
  • If you’re striving for a rustic or industrial look, a pocket door with studded panels can be the perfect addition to your space.
Schaaf Window Co., Inc.

You should consider your budget before beginning any remodeling job, since it is one of the most important considerations. Preparing a budget will ensure that you know precisely how much you are willing to spend on a new entrance door. Consider visiting your local hardware store and speaking with door manufacturers to gain a better understanding of which products are being offered at which price points. To ensure that you are receiving the greatest bargain possible for the money you are prepared to pay, compare local and internet sellers before making your purchase.

There are a plethora of designs to take into consideration.

Want a door that divides two rooms but don’t want to compromise any natural light in the process?

Consider installing a sliding glass door.

The same rules and methods that apply to all other inside doors are used when measuring these types of doors. Just bear in mind whether or not you’ll need to increase the width of your doors for accessibility considerations before you start doing anything.

Select Your Door and Transform Your Interior Space

Following the completion of this lesson on measuring inside doors, you may begin to design the specifics of your interior renovation endeavor. You can follow specific guidelines when it comes to interior door measures, which are laid forth in the industry standard. The following points should be kept in mind while measuring existing frames or making room for a preliminary opening:

  • For inside doors, the usual height is 80 inches. Widest standard widths can be found between 1 5/8″ and 1 3/4″. A rough opening should have an additional 2″ in width and a 12″ in height added to it when planning it out. You may alter these measurements to create doors that are one-of-a-kind and complement the architectural framework of your home.

It might be intimidating to select a new door for the first time, especially if it is your first time. Understanding standard measures, on the other hand, might help you get a better sense of how doors are constructed. As a result, you’ll be prepared when you visit your local or online door maker to look at their products. If there is anything more you need to know before starting your next large job, you may check over this online book of tips:Remodeling 101: A Free Homeowner’s Guide, which is available for free.

See also:  How Much Interior Paint Do I Need For A 1500 Square Foot House

“The education of homeowners is something that we are quite enthusiastic about.

a link to the page’s load

Standard Interior Door Size (Dimensions Guide)

Listed below is our standard interior door size chart, which includes the most often seen door dimensions for the bedroom, bathroom, and closet. The height of the door is the most common measurement for this type of door. All internal doors that will be utilized as passageways between rooms should be at least 80 inches in height to provide proper ventilation. (6’8) This provides enough space for the great majority of individuals to pass through the doorway without hitting their heads on the door jamb.

Closet doors are commonly installed at a height of 78 inches (6’6″).

What Is The Standard Interior Door Size?

The standard widths for various types of interior doors can range anywhere from 24 inches to 36 inches in width. Interior doors are typically 32 inches wide, which is the most common width. As a result, the standard interior door size is 32 inches wide by 80 inches high. The majority of people are able to pass through a doorway of this size without brushing up against the sides of the frame. The width of each door in your home must be at least 36 inches wide if you want to make it wheelchair accessible.

Standard Interior Door Thickness

Interior doors are typically 13/8″ thick, which is the most common thickness. There are a variety of door thicknesses available, including 112″, 158, and 134″. Oversized or extremely huge doors (those that are more than 90 inches tall or more than 36 inches wide) are often thicker than standard-sized doors.

They are also more expensive. When selecting door hardware, such as doorknobs and hinges, the thickness of the door becomes crucial to take into consideration. Fire doors are also thicker than conventional interior doors, making them more resistant to fire.

How to Measure a Door

Doors are one of the finishing touches that can be added to a new construction project, but you shouldn’t put off thinking about them until the very end of the project. During the framing phase, it is determined what size the door will ultimately be. In order to create a ‘rough opening’ between rooms that is sturdy enough to hold a door and door frame, contractors install studs between the rooms. The general rule of thumb for rough openings is that they should be two inches wider than the door that will ultimately be installed in them.

  • When it comes to height, the rough opening must be at least two and a half inches higher than the door it is intended to accommodate.
  • Once you’ve created a rough opening, the next step is to build a door frame and hang a door, or you may install a pre-hung door that has already been installed.
  • Professionals recommend that you measure the doorway (the opening through which the replacement door will hang) rather than the existing door when determining the appropriate size for a replacement door.
  • You’ll also need to figure out what kind of thickness you want your replacement door to be.

Door Width and Height

If you want to know how wide the door you will need to order is, you should stand in front of the existing door and wait for it to open away from you. Open the door, and prop it open if required, to avoid getting your fingers pinched in the hinges of the doorframe. Measure the distance across the door opening with a tape measure by placing one end against the inside of the door frame and the other end against the outside of the door frame. A parallelogram should be drawn between the tape and the floor.

Your new door will be ordered based on the first measurement you take, which will be the largest of those three measurements.

As you would when measuring the width of a door, stand in front of it and open it away from yourself.

Both of these measures should be precisely the same as one another.

Door Thickness

You may utilize the current door to take the final measurement, which is the thickness of the door. Mark off numerous spots along the border of the door where you want to take measurements with a tape measure.

This is especially crucial if you plan to reuse the hinges or door knob, as these pieces of hardware are built depending on the thickness of the door and must be installed correctly the first time.

Interior Door Sizes

Buildings with one or two stories, as well as townhouses, are subject to uniform standards of safety and accessibility under the International Residential Code (IRC). In addition to any applicable municipal codes, this is what the home inspector will refer to when he or she comes to sign off on your new house. While there are strict requirements for the main entrance to a home, there are no such requirements or regulations for interior doors. Where they are present, all that is required is that they are in good working order and that they are installed in accordance with manufacturer’s specifications.

Standard Bedroom Door Size

There is no standard size for bedroom doors because they are all different sizes. Interior doors are typically 32 inches wide and 80 inches high, much like the rest of the house. The normal thickness is 1 3/8″ in diameter.

Interior Double Door Sizes

In a room or corridor, double doors are two doors that hang next to one other, forming a double-wide entrance or exit. Double doors are typically available in three widths: 60 inches, 64 inches, and 72 inches. The normal door height of 80″ continues to be in effect. An interior double door does not have a standard thickness because there is no standard width. The greater the height and width of the door, the greater the thickness of the door required to sustain its own weight. The dimensions of both doors must be the same in terms of width, height, and thickness.

Standard French Door Size

A ‘French’ door is comprised of a thin/light frame that surrounds panes of glass in a symmetrical pattern. The panes of glass generally account for the vast bulk of the door’s total floor space. They are frequently, but not always, hung in groups of two. If the doors are to be hung in pairs, they must be the exact same size and thickness. A French door does not have a set door size since they are made to order. There are several sizes of French doors available, with the lowest measuring around 30 inches and the largest at 72 inches.

Standard Closet Door Size

Neither the International Residential Code nor the International Building Code regulate or standardize closet doors. The size of the rough aperture is the sole constraint on the design. In most cases, closet doors are 30 inches wide by 80 inches high. Bifold doors are commonly found in closets; instead of swinging out into the room, these doors fold in on themselves instead. The typical width of a bifold door panel is 24 inches wide. More information about closet door sizes may be found here.

Standard Bathroom Door Size

A bathroom door must comply to the same basic size requirements as any other interior door in order to function properly. It should be at least 80 inches high and 24 to 36 inches broad to be effective. The thickness and design of the door should be in harmony with the design of the door frame.

Standard Front Door Size

It is important to note that a front door is an external door, which means that it connects the inside of your property with the outside. A house’s main entrance must be at least 80 inches tall and 36 inches wide in order to comply with the International Residential Code. (Side doors and back doors can be narrower in width; the most frequent widths for these doors are 28″, 30″, and 32″ in width.) Exterior doors also have the extra job of protecting your property from the weather and keeping the temperature inside your home consistent.

As a result, they are typically a fraction of an inch thicker than a traditional inside door. Typically, the thickness of a normal front door is 13 inches.

Interior Door Sizing Considerations

Making selections concerning interior doors is difficult since you will be forced to live with the consequences of your decisions for the duration of your ownership of the property. The process of going back and making a doorway larger or narrower is difficult and time-consuming; yet, it is sometimes necessary. All of the inside doors in your home should be of the same style and design to avoid confusion. If you have a doorway that is not conventional, be sure that the door you choose is available in all of the sizes you require.

If you want to live in your house for the foreseeable future or currently have mobility issues, consider making all of the doors 36 inches wide.

Lastly, take into consideration the finish of your inside door.

Two coats of priming followed by two coats of paint can add as much as 1/32″ to the width of the door on either side of the threshold.

Standard Door Frame Size

It is necessary to put door frames into the rough aperture in order for the door to be supported properly by the frame. The door is then connected to the door frame with the use of hinges. Although there is no universally accepted standard, the most typical door frame size in the United States is 36 inches wide by 80 inches tall.

Prehung Door Sizes

Pre-hung doors are pre-hung doors that have previously been attached to a frame with hinges. The frame of the door only needs to be nailed into the studs around the rough opening, and then the door can be finished with trim. This is a popular DIY solution for a reason: it is simple and effective. Hanging a door requires a certain degree of patience and skill, and even experienced pros might find it difficult at times. Purchasing a pre-hung door eliminates all of the guesswork and skill required to install a door.

They are normally available in two basic widths — 30 inches and 36 inches — depending on the manufacturer.

Selecting an Interior Door

Interior doors can be basic and unadorned, or they can be ornately designed. Choose a door that complements or enhances the architectural style of your home, rather than one that matches or enhances the current decor of your home. Tastes vary with time, but doors are built to last a long time and are seldom replaced, so you want to pick a decision that will look excellent for many years to come.

When considering doors, three factors should be considered: materials (what the door is made of), functionality (how the door will be used), and cost (remember to include in both materials and labor costs!)

Door Materials

Wood is the most popular material for interior doors, and it is also the most expensive. The cheapest doors feature a hollow core and are made of wood or fiberboard, which makes them the least costly. Solid wood doors are also available upon request. Glass, stainless steel doors, fiberglass, and aluminum are some of the other materials that may be used for doors. The material and design of your door should be complementary to the overall look and feel of your house. Consider the following example: A sleek, fiberglass door might be ideal in a modern home, but it would appear out of place in a more classic cottage setting.

Door Functionality

When selecting a door, keep in mind the function it will perform in your home. Doors serve as a visual and physical barrier to a space, as well as a means of maintaining privacy. These materials can also be used to produce sound isolation and dampening. This is one of the reasons why many homeowners prefer to install stronger doors in their bedrooms or home offices. Consider how you want the door to open and close. Is it better to have it open into the room or out? Should it be hung on the left or right side of the door frame, depending on your preference?

Does there appear to be enough space to the side of the rough opening to allow the door to be completely opened in that case?

Because it reduces the likelihood of colliding with someone walking by, interior doors that link a room with a corridor are often opened into the room.

Door Cost

For a single door, you may anticipate to pay between $50 and $500 for the door frame and hardware. It is only your time that will be extra expensive if you do the hanging yourself. In the event that you hire a professional to install it, you may anticipate to pay between $100 and $300 per door, depending on your location and the intricacy of the door in question. Pre-hung doors are often somewhat more expensive to purchase than unfinished doors, but they can be less expensive to install.

Leave a Reply

Your email address will not be published.