How To Paint An Rv Interior

How to Paint RV Walls

Make use of these RV interior painting ideas and techniques to learn how to paint RV walls in a professional manner. We’re breaking down the precise procedures we took to paint the walls, cabinets, and ceiling of our RV in order to give our camper a whole new appearance! This is an RV renovation project that you do not want to miss out on.

RV Interior Painting IdeasTips

Paint is one of the most straightforward (and least expensive) methods to change any area. This is especially true when it comes to modifying a recreational vehicle. Painting the interior of an RV might be a daunting task, but don’t be intimidated; you’ll be able to do it! Today, we’re going to walk you through the identical procedure we used to paint our RV. Not going to lie, it isn’t always easy – but the results are SO worth it in the end. Take my word for it!

Video Tutorial

Check out the video tutorial below, or keep reading to view the whole textual format with step-by-step instructions. Our YouTube channel has more of our RV remodeling films, which you can view here. Before we get into the specifics of the processes, here’s some beforeandafter encouragement.

Painting RV Walls – BeforeAfter

How we painted the walls of our RV by ourselves without going insane! Use this article to learn how to properly paint the interior walls of your RV. In this tutorial, we’ll show you how to paint over old RV wallpaper.” data-image-caption=”” data-medium-file=” data-large-file=” width=”1000″ height=”1334″ data-large-file=” width=”1000″ height=”1334″ data-pin-title=”How to Paint RV Walls” data-pin-description=”How to Paint RV Walls” data-pin-description = data-pin-description “How we painted the walls of our RV by ourselves without going insane!

  • How to paint over old rv wallpaper.joyfullygrowingblogrvmakeoverrvliving” src=” alt=”RV inside before painting”> RV interior after painting And here’s the same view after two exhausting days at the office.
  • Prepare for an RV Makeover |
  • This blueprint may be used for almost any RV restoration job!
  • Learn how to paint RV walls and cabinets for an RV interior makeover with our step-by-step instructions.joyfullygrowingblogrvmakeoverrvliving ” src=” alt=”RV interior walls and ceiling painted in white”> RV interior after paint Do you see what I’m saying?

It was really worth it! Okay, let’s get down to business with the steps. Here’s everything you need to know about painting RV walls before you get started (and cabinets, ceiling, trim, etc.).

How to Paint an RV Interior

How to paint RV walls in a simple and effective manner. Learn how to paint RV walls and cabinets in order to complete an RV interior makeover with our step-by-step instructions. joyfullygrowingblogrvmakeoverrvliving” data-image-caption=”” data-medium-file=” data-large-file=” width=”600″ height=”900″ data-image-caption=”” data-medium-file=” data-large-file=” data-pin-title=”How to Paint RV Walls” data-pin-description=”How to Paint RV Walls” data-pin-id=”59813501287505018″ data-pin-description = data-pin-description “How to paint RV walls in a simple and effective manner.

joyfullygrowingblogrvmakeoverrvliving” src=” alt=”How to paint rv interior walls and cabinets: a step-by-step tutorial”>How to paint rv interior walls and cabinets: a step-by-step tutorial “> The following is an example of a formalized formalized formalized There are affiliate links in this post; for more information, please read my disclosure policy, located here.

Supplies Needed:

  • Sander, wood filler, painter’s tape, all-purpose masking paper, hand-masker dispenser, TSP surface cleaning, oversize sponge, and nitrile gloves are all useful tools to have. The following items were needed: KILZ Adhesion Bonding Primer
  • Paint (we used the color Alabaster by Sherwin Williams)
  • Paint brushroller
  • Graco Magnum paint sprayer (believe me, it’s worth it! )
  • Disposable Coveralls
  • Respirator

Step 1: Prep The Walls For Paint

No matter if you’ve totally gutted your RV or are only looking to give it a new coat of paint, you’re likely to notice some defects in the walls.

Sanding The Walls

Whenever you are sanding the walls of an RV, you should take care not to sand away the protective outer coating of the RV wall panels. This upper layer has the appearance of wallpaper, although it is generally constructed of vinyl instead of wallpaper. It is feasible to lightly sand the whole wall without damaging the vinyl coating or the vinyl seam tape that is located every 4 feet between the wall panels on the outside of the wall. The vinyl seam tape is responsible for concealing the seams between the interior wall panels.

It is important to sand the walls and other surfaces lightly before applying primer to ensure adequate adhesion.

We used Elmer’s Carpenter wood filler, which we purchased on Amazon.

After the wood filler has dried, sand the surface to make it as smooth as possible.

Wash the Walls with TSP

Following the completion of sanding and filling all of the holes, it is necessary to clean the walls in order to prepare them for painting. Despite the fact that washing down an area before to painting is generally a good idea, washing down RV walls and ceilings is especially crucial. It is easy for RV interiors to become soiled after a long day of hauling, camping, and, in our case, demo-ing, among other activities. RV interior walls are notoriously tough to paint because the primer has a difficult time adhering to the vinyl ‘wallpaper’ covering that is applied to the inside walls.

  • The use of a mild sanding technique is beneficial, and ending your prep with a TSP wash almost ensures that your primer will adhere well.
  • Because we purchased our RV as a used vehicle, we wanted to be certain that there was no concealed filth on any of its surfaces.
  • The TSP performed admirably, and it is quite simple to use.
  • The adhesion of paint to a surface is affected by a variety of circumstances, including temperature and humidity.

Always follow the manufacturer’s recommendations for your primer and paint while applying paint. See ‘Step 3: Select the Appropriate Primer’ for more information on the primer I recommend.

Step 2: Tape Off Windows and Doors

We utilized an Amazon hand-masker dispenser to expedite this procedure and make it go more swiftly. The dispenser applies tape to a roll of paper in a single step, allowing you to swiftly and simply tape off big windows and doors. Make sure to tape off any and all areas that you do not want painted before you begin painting. Fortunately, we didn’t have to bother about covering anything up because we were repairing the flooring in our trailer. If, on the other hand, you are not rebuilding your flooring, you will need to protect them.

Step 3: RV Paint – Use the right primer!

This is an extremely essential phase! As I mentioned in the previous step, RV walls are not constructed of sheetrock in the same way that a typical house is, so you must use a specific type of primer to prepare the walls for painting. Despite the fact that this is not particularly labeled as RV Paint, it is ideal for the purpose. We usedKILZ Adhesion Primer from Amazon, which we found to be really effective. KILZ Adhesion is a unique latex primer created to attach firmly on slippery surfaces where ordinary water or oil-base primers would not adhere effectively.

Step 4: It’s time for paint!

Now that the walls of your RV have been smoothed, cleaned, and primed, you’re ready to choose a color and begin applying the final coats of paint. If you need help deciding on a color, I prepared a ‘White Paint Guide,’ which can assist you in selecting the best paint color for your particular house or recreational vehicle. Sherwin Williams’ Alabaster is the color we picked for our recreational vehicle (SW 7008). Tip: Once you’ve narrowed down your search to a few preferred colors, try them out on your walls using Peel-and-Stick paint samples from Samplize to see which ones you like best!

Once you’ve decided on a color, you’ll need to decide on an application technique to use.

Each of these three alternatives has its own set of advantages.

We used a paint sprayer to paint the walls and ceiling of the room.

Using An Airless Paint Sprayer

When painting big surfaces such as walls, ceilings, and cabinets, an airless paint sprayer will save you a significant amount of time. When you consider that you will be applying numerous coats, the time savings becomes even more significant. Almost every drop of paint in our RV was applied with a sprayer, which we found to be incredibly efficient. The last layer of finish paint was applied after the first coat of priming, which took a total of two applications. If you decide to paint using a sprayer, make sure you wear a mask while doing so.

I was pleasantly delighted at how inexpensively I was able to get this Graco Magnum airless paint sprayer from the listing on Amazon.

So far, it has performed admirably, and I would strongly suggest it.

This will be far more doable if you use a high-quality primer.

We propose that you use this high-quality Kilz Adhesion Primer that you can get on Amazon. Because we painted the interior of our RV white, we added a second coat of finish paint just to be safe and to guarantee that no dark spots or stains came through from the outside of the vehicle.

Tips For Using A Paint Sprayer

These suggestions will assist you in getting started with a paint sprayer and increasing your painting productivity.

  • Before spraying, make sure your paint is fully mixed. This aids in the prevention of blockages. (This was something we discovered the hard way.) Thoroughly prime the sprayer before use. Pay close attention to all of the priming instructions that come with your individual kind of paint sprayer. Use a test wall (a sheet of plywood or an extra big cardboard box works nicely) to practice the process. Long, even strokes are used to paint with. You’ll have to work on developing your own method over time, but you’ll get the hang of it quite soon. Make sure that your paint coats are not overly thick. It’s tempting to attempt to cram as much paint as possible into a single coat, but thick coatings don’t always adhere well and have a propensity to spill and run, especially when they’re wet. In the event that you wind up with drips that require you to sand down and start over, you will be disappointed.

My Related Articles include the following: RV Remodel IdeasTips – 9 Projects That Will Completely Transform Your Recreation Vehicle How we painted the walls of our RV by ourselves without going insane! Use this article to learn how to properly paint the interior walls of your RV. In this tutorial, we’ll show you how to paint over old RV wallpaper.” data-image-caption=”” data-medium-file=” data-large-file=” width=”1000″ height=”1333″ data-large-file=” width=”1000″ height=”1333″ data-pin-title=”How to Paint RV Walls” data-pin-description=”How to Paint RV Walls” data-pin-description = data-pin-description “How we painted the walls of our RV by ourselves without going insane!

In this tutorial, we’ll show you how to paint over existing RV wallpaper.joyfullygrowingblogrvmakeoverrvliving ” src=” alt=”Interior of an RV during remodeling painted in white”>

Final Thoughts On Painting RV Walls

Interior walls of recreational vehicles are typically constructed of thin plywood panels that have been coated with a specific vinyl coating. The particular covering is similar to wall paper in appearance, and it is not intended to be painted in any way. As a result, painting the interior of a recreational vehicle is more challenging than painting the interior of a normal residential dwelling. When it comes to painting an RV, being thorough with your preparation work is essential. Make sure to use a bonding primer and to follow all of the techniques outlined in this article for the best results!

It may be a time-consuming task, but with a little elbow grease, you can have your RV looking like new again.

Do you have any suggestions for anything I might have missed?

Pin this post for later!

Use this DIY camper makeover instruction to paint the interior walls of your camper on your own time and budget! This simple video, which includes step-by-step directions, makes use of the finest primer for camper walls to get a flawless finish. It is quite straightforward to follow. These camper renovation painting instructions are suitable for a variety of vehicles, including travel trailers, fifth wheels, pull behind campers, and motorhomes. camperremodelcampertipsdiycamperblogcamperremodelcampertipsdiycamper “data-image-caption=”” data-medium-file=” data-large-file=” width=”600″ height=”900″ data-image-caption=”” data-medium-file=” data-large-file=” data-pin-title=”How to Paint RV Walls” data-pin-description=”How to Paint RV Walls” data-pin-id=”244109242288970493″ data-pin-description=” Use this DIY camper makeover instruction to paint the interior walls of your camper on your own time and budget!

This simple video, which includes step-by-step directions, makes use of the finest primer for camper walls to get a flawless finish.

These camper renovation painting instructions are suitable for a variety of vehicles, including travel trailers, fifth wheels, pull behind campers, and motorhomes.

src=” alt=””> “joyfullygrowingblogcamperremodelcampertipsdiycamper” src=” alt=””> “joyfullygrowingblogcamperremodelcampertipsdiycamper” src=” alt=””> “joyfullygrowingblogcamperremodelcampertipsdiycamper” src=” alt=””> “joyfullygrowingblogcamperremodelcampertipsdiy

How To Paint RV Walls

I’ve written extensively on painting the exterior of an RV, but what about painting the interior of a recreational vehicle? Since I receive multiple queries regarding this issue on a weekly basis, I decided it was past time for me to provide my recommendations. This guide will teach you all you need to know about painting the inner walls of an antique recreational vehicle.

See also:  How To Start An Interior Decorating Business

About RV Walls

The first question that most visitors have is whether or not the walls are indeed made of stone. In most older recreational vehicles, you’ve probably noticed that the walls are covered with imitation wood paneling or a thin wallboard coated in what appears to be wallpaper. The first thing to remember is that you should not attempt to delete this wallpaper. If you are working with a camper that has seen some water damage, or if there are areas where the wallpaper is bubbling or rippling, I recommend that you assess the camper for more damage before continuing with the restoration process.

If the problem is minimal, I recommend sanding the affected area down or using a knife to cut away the rippling section of the surface.

However, as previously said, do not attempt to remove the wallpaper as you will just end up creating even more work for yourself.

Prep Work

Preparation is just as essential as painting the inside walls of your RV when it comes to painting the interior walls. Make sure your walls are clear of dust and oil and that they are clean. An excellent quality paint will often adhere to a clean, dry wall without the need for an additional chemical to aid adhesion in many situations. However, if you are dealing with a really old RV with extremely dusty walls, you may want to consider using a TSP replacement such as Krud Kutter instead. For those of you who have genuine wood on their walls, you may want to start with a liquid sander to smooth up the surface.

This one is one of my favorites.

Paint and Primer

Using Behr Marquee paint and primer in one on ordinary walls or over wallpaper has proven to be really successful for me. It provides excellent coverage without the need for an extra priming and almost usually covers in a single coat! On the other hand, I have also used a bonding primer such as Stix or Gripper, followed by a less costly paint to get the same effect. As long as your surface is clean and dull, you shouldn’t have to use any special tools or products. If you are covering wood, plastic, or imitation wood, or if the surface has any type of sheen to it, I HIGHLY suggest that you use a bonding primer before you begin painting.

Semi-gloss paint will show up too many defects, whereas flat paint will not hold up well in high humidity conditions.

I tried it once, thinking it would be more adherent, and it ended up flaking off all over the place.

“ If you are covering wood, plastic, or imitation wood, or if the surface has any type of sheen to it, I HIGHLY suggest that you use a bonding primer before you begin painting. Here is an overview of the materials I recommend you use:

  • Wood paneling, plastic, or glossy surfaces should be primed with Stix or Gripper primer. Latex paint with an eggshell finish, rather than a flat or semi-gloss finish
  • Clean and prepare the surface using a TSP alternative such as Krud Kutter, then allow it to dry completely. Any wallpaper that has bubbled or rippled owing to age should be sanded down or taken removed. Before painting, inspect the surface for signs of water damage. If your walls have any gloss to them, or if you’re painting over any type of wood paneling, you should use a bonding primer like as Stix or Gripper.

Other Options for Damaged Walls

If you are attempting to remedy a severely damaged or defective region, you may want to consider using something other than paint to conceal the problem. After cleaning the surface to the best of your ability, consider covering it with one of the alternatives listed below. Disclaimer: Do not cover damage unless the problem has been resolved completely. Don’t merely cover up the leak and overlook the situation; instead, repair the leak and remove any damaged wood.

  • Peel and stick wallpaper and pre-pasted wallpaper have both been utilized in this project. Despite the fact that I have had good success with peel and stick, it is not suggested for external walls that are susceptible to condensation due to temperature fluctuations. When utilizing a peel-and-stick product, it is normally advised that you use an extra adhesive to secure the product. Use wallpaper as a beautiful accent to cover damaged walls, rather than covering every wall in the room. Peel and stick tile: I enjoy installing peel and stick tile in my recreational vehicles. It is affordable, simple to install, and does not add any more weight to the vehicle. Take a look at myAmazon Store to see some of my favorite alternatives. Using vinyl tiles as an accent in my antique trailers has been a favorite project of mine. It’s a lightweight material that’s simple to cut. You can find some here: Tile made of vinyl
  • Although I wouldn’t generally advocate adding a lot of paneling if weight is a problem, there are a plethora of excellent solutions available. The use of thin wood planks, vinyl tile panels, and imitation brick may all be used to give the appearance of a focus wall while also reinforcing or covering damage.

Pin-It for Later!

Sarah is a homeschooling parent who is the second generation to do so. She resides in Metro Detroit with her husband, Jay, and their five children, as well as their dog, Edison. They like being physically active as a family and taking road vacations in their remodeled RVs to get away from it all. Sarah enjoys singing, creating beautiful things, and eating pizza.

Connect with me on Instagram

Do you want to paint your RV but don’t know where to begin? Look no further. I’ve described all of the actions you’ll need to take to paint the interior of your RV below. You may also look at my expenditure record to see how much it cost me to paint a 30′ enclosed trailer. Paint for the walls, ceiling, and cabinets is included in the overall cost. The amount of paint I used on a 30′ trailer is broken down into the following categories.

  • Gripper Primer or Kilz Adhesion Primer
  • 4 gallons white (Frost by Behr)
  • 1 gallon green (Pewter Green by Sherwin Williams)
  • 1 gallon black (Broadway by Behr)
  • 3 gallons gripper primer or Kilz Adhesion Primer

Resources in addition to the ones listed above:

Instructions

Any blinds, valances, or other things that are screwed to the walls should be removed. It’s less difficult to paint when you don’t have to cut around anything on the walls. Also, make careful to remove any wallpaper borders that may have been there. To easily remove the wallpaper borders, use a heat gun to gently heat the border until it is easily removed from the wall. Acetone should be used to remove any leftover adhesive. Please keep in mind that you should not attempt to remove the entire wallpaper off the plywood wall panels.

  1. Patch.
  2. If the surface around the screw hole is elevated, first scrape the raised material away using a razor blade to remove it.
  3. It is not necessary to sand the whole surface of the walls that have been mended; just the patched sections must be sanded.
  4. TSP should be used to clean all of the walls.
  5. Caulk.
  6. Remove any excess by wiping it off.
  7. Tape.

In addition, 3M masking tape may be used to block off bigger regions.

Prime.

Gripper, which can be obtained at Home Depot, or Kilz Adhesion are both acceptable choices.

Wait 24 to 48 hours before applying your first layer of paint to ensure a smooth finish.

Caulking should be completed before painting since a lot of caulk will yellow as a result of exposure to ultraviolet light (UV).

In order to prevent your paint from flaking or scratching off over time, this step is critical.

Purchase high-quality paint.

Use a brush to get into the corners of the walls, and 3/8′′ nap rollers to apply the majority of the paint to the rest of the wall.

TheGraco Magnum paint sprayer comes highly recommended by me.

Wait another 24-48 hours, and once the second layer has dried, lightly sand and wash down the surface in between applications to ensure even drying.

Tip: I strongly recommend using Flood Floetrol to conceal any brush strokes or roller markings, or even to get a spray finish that is as smooth as glass. 8 ounces per gallon of paint is a good starting point. Recommendations for paint:

  • Behr Marquee, Benjamin Moore Regal Select, Sherwin Williams Duration are some of the paint brands available.

Remove any painter’s tape from the walls and reattach everything to them. For the first two weeks after painting, use caution around the freshly painted walls. They take a long time to cure, but once they do, they have a long-lasting finish.

Tips for Painting the Walls of your RV

Disclaimer: This post may include affiliate links, which means that if you click on one of the links and make a purchase, we may receive a profit on the sale. This service is provided at no additional charge to you. Please see our complete disclosure here. I’m not going to lie: painting the interior of our RV was a complete disaster. I believe I told Eric on a number of occasions that if we ever had to paint the interior of an RV again, we’d hire someone to do it instead of doing it ourselves.

But after discovering the ceiling leak, we painted all of the cabinets, some of them more than once, to make sure they were completely covered in paint.

I’ll tell you something.

In fact, I would argue that painting the RV walls, ceiling, vents, and cupboards yielded the greatest return on our investment because it drastically transformed the entire vibe of the room.

How to Paint the Walls of your RV

While I acknowledge that painting the interior of an RV may be time-consuming and exhausting, it is also a cost-effective approach to transform the overall look and feel of the space. To put it another way, it’s well worth it! The majority of RV interior walls are made of luan plywood sheets with a wallpaper texture glued to them, which you don’t want to remove but can paint over if you don’t want to remove it. Your kitchen or bathroom walls, on the other hand, may have an extra wallpaper border applied on top of this, which may be taken down and replaced.

If you’re planning on painting the walls of your RV, my advise is to start by prepping the surfaces thoroughly.

Make any necessary repairs before beginning, and then thoroughly clean all surfaces using a degreaser such as TSP or Simple Green to reduce the likelihood of the need for scuff sanding.

Following that, you may apply your final paint color.

  • Sandpaper is used for scuff sanding
  • Spackling is used to fill up nail holes or to make repairs
  • And other supplies are available. TSP or Simple Green degreaser are good options. If you want to use TSP, a TSP alternative, or a paint sprayer, you should wear gloves and eye protection. Tape for painting
  • Popular options include PPG Gripper Primer, Kilz Bonding Primer, Stix Bonding Primer, and Glidden Gripper Primer, to name a few. A top coat of paint in the sheen of your choice
  • The Purdy and Wooster Brushes and Rollers are my favorite
  • I HATE having bristles or small furries in my paint – Purdy and Wooster Brushes and Rollers are my favorite
  • Paint Sprayer– this is an optional step, but if I ever paint another RV interior white, I will use this method.

I recommend that you have your favorite music station or podcast station set up first, as well as your beverage of choice, before proceeding with any of the instructions listed below. It makes the painting process a lot more pleasurable overall.

Step 1:

First and foremost, delete any wallpaper borders that you do not wish to keep up with. However, keep in mind that there is a SIGNIFICANT difference between the wallpaper texture that is present on all of the walls and the bordered wallpaper that has been applied on top of that texture. The inner walls of your RV are most likely composed of some form of luan plywood that has a wallpaper texture applied to it that is not removable, at least not that I am aware of, according to the manufacturer.

See also:  How To Build An Interior Door Frame

However, I have seen some RVs and campers that have accent walls that are wallpapered, so I would take a good look before attempting to remove the wallpaper off the wall.

This is where bonding primer comes in, which we’ll discuss in more detail later. You may learn more about how we eliminated the wallpaper borders by visiting this page.

Step 2:

Prepare the area by removing any items that you do not want painted, such as outlet covers and tape around edges that you do not want painted, such as window frames (we might or might not have done this, but it was nothing a magic eraser or some rubbing alcohol couldn’t fix). Cover the floors and any furniture that you don’t want to get paint on accidently with tarps before you begin painting.

Step 3:

Lightly sand the walls to make them smooth. I’m not sure if this step is absolutely essential, especially if you’re using a degreaser, but it surely doesn’t harm to try it out. A minimum need is that the walls are free of flaws, and scuffing can assist in smoothing out any irregularities that may be present. Don’t get caught up in the details. I just walked around the RV and gently sanded down the walls with a few swipes of 120 grit sandpaper to give it a fresh coat of paint. Later, I learned that this should be done AFTER you have cleaned the walls, but at the time, it seemed to make more sense to sand first and then clean the walls, so I did.

Maybe.

Step 4:

Following that, you’ll want to clean the walls with a degreaser in order to prepare them for painting. When it comes to degreasing and cleaning, the most commonly used product appears to be TSP or TSP substitute, which is a degreaser and cleaning agent commonly used to prepare walls before painting. However, both substances are extremely toxic, so use caution and wear gloves and eye protection if you choose to proceed in this manner. To be completely honest, I had never used either of these products prior to owning an RV, but we decided on TSP substitute because it was the one that kept coming up in my research.

If I had to do it all over again, I’d probably choose that route, especially because it eliminates the need to wash it off afterwards.

Step 5:

It’s time to prime your walls once they’ve been cleaned and dried. We utilized a low-VOC Kilz primer that we had on hand, but it is suggested that you use a bonding primer. Due to its adhesive capabilities, Kilz Bonding Primer, Stix Bonding Primer, PPG Gripper Primer, and Glidden Gripper Primer appear to be the most popular primers on the market. Since then, we’ve used PPG Gripper Primer on a number of jobs, and we strongly suggest it due of its excellent coverage. Your RV’s walls are most likely comprised of plywood or wood veneer that has been coated with vinyl.

  • There are two types of bonding primer available: water-based and oil-based.
  • Because the consistency is thicker than your typical primer can, it can be a little more difficult to work with, but the coverage is far greater than with your typical primer.
  • It may also be useful in neutralizing any sticky residue left behind after removing wallpaper (such as those annoying borders), but I haven’t personally tried it.
  • Make sure you follow the manufacturer’s guidelines for drying and curing time and that you are painting in appropriate temperature conditions.
  • It is normally OK to put water-based paint over an oil-based primer, however it is not acceptable to apply an oil-based paint over a water-based primer in most cases.

To keep things easy, a good rule of thumb is to go with water-based primers and paints rather than oil-based primers and paints. Follow the manufacturer’s instructions and suggestions offered with the primer and paint you purchase to get the best results possible.

Step 6:

It’s finally time to go to work on the painting, hooray! It’s possible that one coat may suffice if you’re using a deeper hue, however we went with Ultra Pure White in satin and needed two applications total. In addition, if you are planning on painting your walls white, you may want to think about painting your ceiling white as well. After we painted our walls and cabinets, it appeared that our ceiling, which had previously been white, had become more beige in color. As a result, we painted the ceiling using the same procedure as described above, and it made a significant difference in the overall brightness of the room!

  1. What I didn’t anticipate was that painting the walls of our RV would be a more difficult undertaking than painting the walls of our prior residences, especially given how much smaller it is.
  2. The good news is that everything has held up exceptionally well since we painted, and it was well worth it!
  3. After receiving several inquiries regarding this, I would want to clarify that we used spackling to fill up any holes, which we then gently sanded and painted over.
  4. As far as suggestions go, if you’re working with water-based paint, I’d suggest keeping a magic eraser or a wet rag/paper towel on available for any spots where you could accidently get paint on your hands.

What would we do differently?

If we ever find ourselves in the position of having to paint the interior of a camper, there is one thing I would do differently. I would use a paint sprayer to accomplish this. Yup. We even had two on hand throughout our renovation, but to be really honest, I was too lazy to cover anything up and didn’t think painting would be such a time-consuming task. If you don’t already have a sprayer and don’t want to spend the money on a more costly model, you can always hire one from a rental company.

As for any other suggestions, please share them in the comments section below.

HOW TO PAINT RV WALLS –

We had no idea how much time and effort would be required to paint the RV walls. We gained valuable knowledge in the process, and now I’m going to provide some helpful advice on how to paint RV walls in your trailer or camper. Those who missed the specifics of our expedition can catch up by reading the backstory. Our house (which we recently sold!) had been painted almost entirely in the previous 10 years, so we weren’t exactly newcomers to the world of interior design and painting. Please understand that painting the walls of your RV is a far larger undertaking than painting the walls of any room in a typical house.

You just have a little amount of area to work with.

It is probable that you will be dealing with vinyl wallpaper, which will need extensive preparation!

I still believe it was worth every single second, despite the countless hours I spent in the camper. One single thing – and that is PAINT – may make a significant difference to the interior of your camper. So let’s get started and learn how to paint the walls of an RV!

SUPPLIES to PAINT RV WALLS

  • The following items are required: an electric screwdriver
  • Sandpaper
  • Gloves
  • A degreaser (we used water and vinegar, although there are other choices available)
  • Painter’s tape (plenty of it! )
  • Spray painter, primer, paint, protective goggles, and paint coveralls are all needed.

PREP before you PAINT RV WALLS

This phase, in my opinion, is the most significant step in the creation of your picture. DO NOT MISS OUT ON IT! First and foremost, though, is this: Remove all of the blinds, screws, and other items from your room to make more space. We decided to spray paint our camper rather than hand painting the walls and cabinets, which meant we had to basically take everything out and cover it with plastic. Wash and degrease your vinyl wallpaper using a degreaser or a combination of water and vinegar. This is the method that we employed, and it was completely successful.

  1. Then you may fill in the gaps that you know you won’t be using any longer.
  2. After that, sand your walls and other surfaces.
  3. Despite the fact that I sanded the walls, there were a few spots where I wasn’t as thorough as I should have been, and the paint began to peel in those spots.
  4. We made use of an electric sander to expedite the procedure.
  5. Before you begin painting the RV walls, make sure everything is taped off using painter’s tape.
  6. In addition to taking time, this step is essential, especially if you want to utilize a spray painter for your project.

PRIME THE WALLS

After you have completed all of the rigorous preparing work, you may begin painting the walls using primer. We also painted the ceiling at the same time since the ceiling would have seemed much yellower in hue than the walls if we hadn’t done so. Glidden Gripper is a fantastic primer, and that is exactly what we used, but there are plenty other alternatives available as well. A few litres of primer were required to prepare everything (even the cabinets) because we utilized a spray painter to paint everything.

Allow for thorough drying of the primer before applying the paint.

PAINT camper WALLS

I wanted bright white walls, so I chose BEHR Ultra White (which has been my go-to white hue for years, or at least it was in our last home!). We decided on a satin finish since I wanted to be able to wipe down the walls with a damp towel later on. Some places need two coats of paint to be completely covered. If you plan to apply two coats, make sure to provide enough time between each application. Review: Remove furniture, degrease, fill holes, sand (again and again), prime, and paint. Even though it took a lot of time and effort to complete this part of our Camper refurbishment, I still believe it was well worth the effort.

Also, I’m planning to create a fast post on how to paint RV cupboards, so keep an eye out for additional postings on the camper restoration in the near future.

Check out the BEFORE AND AFTER of our camper renovation

Cheers, Aniko

How to Paint Your RV, Camper or Motorhome Interior –

There is no law that says you have to be content with the dark and dismal inside of your RV! Regardless of whether your RV is a huge rig motorhome or a little travel trailer, whether it is brand new or 50 years old, you can paint your RV to lighten, brighten, and personalize it by following these simple painting instructions. This portion of your RV renovation project will result in a brighter, more homelike appearance and feel for your motorhome or camper once it is completed!

After you’ve finished designing your RV interior remodel, it’s time to start to work on painting the interior of your RV. Preparation and painting are very straightforward processes. However, there are certain supplies and techniques that you’ll need to use in order to paint your RV.

This blog article contains affiliate links.Full disclosurehere.

Did you know that RV manufacturers often employ beige and brown wallpaper as a design element? One reason is because beige and tan are neutral hues that go well with almost any décor style. Furthermore, their drab hues conceal faults that occurred throughout the production process.

What pushed us to rethink our own RV interior decor?

We first met David and Cheryl of Landmark Adventures in January of this year. They welcomed us into their home for a cup of coffee and a talk one morning. I knew the minute we stepped inside their fifth wheel (which was also a Heartland Landmark) that I was in love, and I could see the wheels spinning in Dan’s brain as he thought about it. David and Cheryl’s fifth wheel appeared to be less of an RV and more of a house on wheels. There were no more dreary beige walls throughout the house! Their RV’s inside was stunning, with lots of light and space.

They surely put a grin on our faces as well!

And quickly understood what I was thinking and agreed that we should do the same to our own fifth wheel trailer.

Research!

The interior primer and paint we’re going to use for the project had to be decided before we could even pick up a single paint brush! In contrast to ordinary residences, which have drywall wall surfaces, the inside walls of campers and recreational vehicles are covered with a slightly textured and low-sheen wallpaper. As a result, we’ve put together a comprehensive guide on how to correctly paint your recreational vehicle.

See also:  What Type Of Paint For Interior Window Frames

Prepare your work area

Before you begin painting, you’ll want to be sure that the area has been adequately prepared. Painting may be a sloppy and time-consuming task. As a result, plastic tarps should be used to protect your furniture and flooring. In addition, you may use it to wrap around light fixtures, tape up on cabinets, and other similar applications by using high-quality painter’s tape. If you have light fixtures, you should remove them from the walls and, if feasible, disassemble them to make painting simpler.

Remove all light switch covers and electrical outlet covers as well, so that you may have seamless transitions and a more professional appearance when your painting project is over, and then replace them with new covers.

Project Prep Supplies

  • Screwdrivers (for removing fixtures)
  • Plastic Painting Tarps
  • Painter’s Tape
  • Screwdrivers (for removing fixtures)

Prepare surfaces that will be painted

The texture and finish of your current wallpaper may necessitate the use of fine grit sandpaper on the wallpaper surface to lighten the appearance of the wallpaper. This will assist in the adhesion of the primer and paint to the wallpaper. Any rips or bubbles in the wallpaper, as well as signs of moisture damage, must be addressed prior to continuing with the installation process.

Clean all surfaces

You’ll need to carefully clean all of the surfaces of your RV before you can begin priming or painting it to ensure that there is no dust or dirt, oil, culinary residue, or adhesive smudges (from the manufacturer). If you don’t do this, your primer and paint may not stick correctly to the surface. Wipe off all surfaces with clean, soft cloths and a 50-50 vinegar-to-hot water combination made from white vinegar.

You do not want them to be completely soaked. As a result, make ensure that your damp garments are wrung out. If your RV is older, you may need to repeat the process as many times as required until the fabric displays no dirt. Allow all surfaces to dry thoroughly before moving on.

Caulk

It is necessary to caulk every crack, gap, nook, and cranny once they have been thoroughly prepared and cleaned. Caulking should be done from ceiling to floor. Otherwise, faults will be unsightly and distractingly obvious. Believe me when I say that you will now understand why RV manufacturers add dark cabinetry and dark textured wallpaper. Those dark finishes were chosen specifically to conceal crooked faults and imperfections that occurred throughout the production process. Believe me when I say that you will notice numerous!

In other words, caulking is the most critical aspect in achieving a faultless finish and also the most difficult to master.

Caulking Supplies:

  • Clean cloths
  • Four tubes of paintable silicone caulk
  • A caulking gun
  • And other supplies.

Caulking Procedure:

  • Place the tube of caulk into the caulking gun
  • Press the trigger. Sharp knife should be used to cut the tip at an angle so that it may be applied as effectively as possible. Slowly run a bead of caulk around the border, wrinkle, or crack, working your way inward. Take care not to leak or smear the caulk in any areas other than where you want it to go. Make use of a moist towel to rub your finger across it to wet your finger
  • Immediately rub your damp finger over the caulk, pressing it into the crease or edge and smoothing out the edges. Perhaps you’ll need to repeat this procedure a couple of times on the caulk’s edges to ensure that there are no lumps or streaks left on the wallpaper surface. Allow caulk to cure completely before priming or painting, which should take at least 24 hours.

Primer

Dan was ready to apply the ceiling and wall primer after he had completed prepping, cleaning, and caulking the walls and ceilings. But first, let’s talk about why you should apply primer before painting the interior walls of your recreational vehicle. Primer covers and protects the surface that may be resistant to paint, allowing your paint to apply easily and evenly without lifting or peeling. There are three primary producers of interior primers on the market. They are all apparently similar in that they cover the same ground in terms of stains, dark hues, diverse rough surfaces, and various finishes and coatings.

  1. It’s a surface primer that may be applied to virtually any wall, ceiling, or other surface by rolling or brushing it on.
  2. It’s as simple to apply as conventional paint, with the exception that it’s a little thicker due to the bonding agent.
  3. It is currently referred to as the PPG Gripper.
  4. However, there are alternative products available, such as KilzandZinsserPrimer.
  5. As a result, you’ll need to prepare ahead of time, especially if you’re going to be applying many coats to different surfaces.
  6. Aside from that, surface primer has a distinct, unappealing smell.

RV Painting Suggestions

If I may provide some sound advise before applying any primer or paint, it would be as follows: Before priming and painting all of your walls, test a tiny patch in an inconspicuous spot (such as the interior of a closet or pantry) to ensure that the entire procedure is successful. It would be preferable to discover that anything went wrong on that tiny piece rather than the entire inside or your RV, which you had painted recently. Don’t skimp on the priming, trust me on this! Although it is somewhat more expensive, high-quality primers that contain a high-bonding stain blocker are highly recommended.

Also, there are interior surface primer producers who provide a primer and paint that is a one-step process.

A number of experiences have been shared with me in which the paint did not adhere correctly and flaked off.

Make ensuring that you thoroughly mix it. Additionally, it is critical to cover the primer can immediately after filling your roller pan in order to prevent the priming from drying out or clumping.

Primer Supplies

  • Preparation: Kilz PrimerorZinsser Primer, 2′′ Angled Painting Brush, 6′′ Paint Roller Kit, Clean Cloths

Our fifth wheel painting project

The ceiling of our Landmark fifth wheel was originally covered in the same drab, beige patterned wallpaper that covered the walls. There was also a hideous(in our view) plastic resin wood-grain light fixture thingie(or whatever they’re called) with mirrors that was on the wall next to the bed. That entire incomprehensible light fixture thing was something I really didn’t want to see again, but it was going to need a lot of light fixture and ceiling adjustment. Because that was never going to happen, we decided to just paint it the same color as the ceiling and hope that it turned out better than alright.

  • And, yes, I acknowledge that we cheated on the ceiling, but bear with me while I explain.
  • Yes, we did get our primer tinted to match the color we chose for our ceiling.
  • This allowed us to get the best color and seamless appearance for our ceiling.
  • Most wall primers are available in either a white or a very light gray base color.
  • Always on the side of liberty Dan began by thoroughly cleaning the surface and caulking every joint, crack, and crevice.
  • He waited for 24 hours for the caulk to set and dry before painting over it.
  • Because it was such a dark hue, it required three coats of primer on both of them.
  • As you can see in the photo below, they all harmonized together flawlessly, and the ceiling now seems to be a craftsman ceiling rather than a cheap camper ceiling.

Paint

Once we had settled on our wall colors, we measured the surfaces of the walls to determine how much paint we would require; we planned on two coats of paint. We not only measured our living room and galley, but we also measured the hallway and bedroom, which would be painted later on in the future. Please keep in mind that the amounts shown here are for OUR specific area that was being painted. It is possible that your calculations and supply amounts will differ. Regardless, always budget for an additional 10% to allow for touch-ups later on.

Despite the fact that they were from a different paint manufacturer, the paint mixologist was able to color match them using their computerized color-matching equipment.

The colors seen in this photograph do not represent the real colors of the product.

The hue Cooled Blue SW6759, which resembled a light aqua blue, was chosen to provide interest to our living area; the wall color within the slides was chosen to be the same color as the walls outside the slides.

Because we wanted to maintain brand consistency, we purchased Gliddenlatex paint in the eggshell finish. Always On Liberty It would assure adequate adherence to the Glidden Gripper Primer and provide the best possible finish if it maintained brand consistency.

Why you should paint your RV walls ineggshellfinish?

We recommend an eggshell finish (non-glossy sheen) because surface blemishes such as minor faults, wallpaper splits, pinholes, tape overlaps, surface rubs, and other imperfections will be less obvious. An eggshell finish will give the illusion of a more professional finish since it is cleaner. One condition, however: we are responsible adults who do not leave fingerprints on our walls. If you have youngsters who are bouncy or dogs who are dirty, you may want to try an asatin finishfinish. Surface defects will, however, be more noticeable due to the glossier finish, which makes them more noticeable.

Paint Supplies(what we bought for OUR RV)

  • 2 Gallons of Glidden Gripper (for our ceiling and walls)
  • 1 gallon of Cooled Blue paint
  • 1 gallon of Frolic paint
  • 2′′ angled paint brush
  • 6′′ paint roller kit
  • Clean cloths
  • Painter’s Tape
  • Paint stir sticks

Painting Tips

  • Bring caulk, primer, and paint into your RV to allow them to become acclimated to room temperature for best application
  • Do this at least 24 hours before you want to use them. Only paint when the humidity is low and the temperature is consistent for the best painting results. You should avoid consuming coffee or any other caffeinated beverage since it may cause you to feel jittery. Otherwise, your painting will be a complete disaster. Don’t spend a lot of money on large paint rollers. The 6′′ wide thin rollers with a 3/8″ nap, which are listed above in our supply list, are far simpler to handle. They are more maneuverable in confined areas, such as behind toilets, under or over cupboards, behind furniture, and so on
  • And Make use of a high-quality paintbrush with a long handle and an angled tip. This makes it simpler to paint in nooks and cracks by utilizing the sharp end of the paintbrush. In order to have the best control, keep your paintbrush close to the base of the brush near the neck and metal banding. When using painter’s tape, make sure that your caulk, primer, or paint is totally dry before applying the tape over it (typically 24-48 hours). Additionally, after putting the tape, be sure to press firmly over the edge to prevent paint from seeping underneath
  • And Before removing painter’s tape, score the edge of the tape with a sharp craft knife to ensure that it comes off neatly and without taking any paint with it. In between applications, allow for 2-3 hours of curing and drying time. Keep your remaining paint instead of throwing it away. Empty paint cans can be purchased to transfer leftover paint and name the cans. Keep leftover caulk, paint, or primer at room temperature to avoid drying out. Never expose any to frigid conditions or temperatures over 80 degrees.

Always on the side of liberty

Wrapping up our how-to paint your RV tutorial

As you can see from our images, we couldn’t be happier with the outcomes of our interior painting project! Thanks for visiting! Amazingly bright and gorgeous, the interior of our fifth wheel trailer! Because Dan took the time to complete all of the processes in our RV renovation project, we were able to create a great, unique home in the end (on wheels). Always On LibertyAlways On LibertyAlways On LibertyAlways On LibertyAlways On LibertyAlways On Liberty Our expectations were met in terms of finishing, and we are really pleased with the final product on all counts.

So, are you ready to paint the interior of your RV?

Read more about our RV renovation:

Leave a Reply

Your email address will not be published.