How Much Do Interior Doors Cost

Interior Door Installation Cost for Prefab & Custom Doors

The average cost of installing an internal door ranges from $360 to $1,130. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. Doors are an often-overlooked component in home décor, yet the correct door can make or break the overall aesthetic of a space. An interior door installation costs on average $735, although costs can vary between $360 and $1,130 depending on the type and complexity of the door. For more elaborate forms, such as pocket or French doors, costs might rise significantly.

How Much Does It Cost to Install an Interior Door Near You?

There are some geographical variances in pricing (the cost to install an inside door in major urban regions is more expensive than the cost to install an interior door in less populated areas), but the approximate range was nearly the same across the board. Here are some examples of prevalent expenses across the United States:

  • Los Angeles: $575–1,510
  • Quincy, IL: $465–1,380
  • Traverse City, MI: 510–1,190
  • New Orleans: $560–1,360
  • Galveston, TX: 370–1,170
  • Philadelphia: 450–1,320
  • And more cities.

How Much Does It Cost to Install an Interior Door Yourself?

Unless you have specialized skills, such as a miter saw and a power drill, the cost of installing an inside door is inexpensive, averaging approximately $25 for the hardware—as well as the cost of the door itself. However, because the process is extremely detailed and mistakes might result in uneven framing, damaged trim, or a door that won’t latch, we recommend contacting a local door installer to assist you with the project unless you are skilled. Installing an interior door on your own should take no more than two to three hours for a pre-hung door and no more than five to six hours for a slab door if everything is done correctly.

Interior Door Installation Cost Breakdown

The cost of installing an interior door depends on the kind of door, doorframe, and any further add-ons.

Type of Door

The cost of installing an interior door is largely determined by the type of door being installed. Simple bifold doors will cost you between $100 and $300 to install, whereas more complicated doors, such as a pocket door, will cost between $100 and $2,500 to install.

Slab vs. Prehung

Keep in mind that there are various installation expenses for slab and pre-hung doors when deciding between them.A slab door does not have a visible frame or any hinges.A pre-hung door has a visible frame and hinges. Alternatively, a prehung door contains a door slab that has already been hung in a frame and has cut-outs for the doorknob and strike plate. A prehung door can be painted or stained and completed with a handle. The area around a prehung door is often filled with drywall, trim, and paint.

The cost of installing a prehung door varies substantially depending on the size of the door:

  • The following prices are for standard (up to 80 by 36 inches): $150–$700 installed
  • Excessively huge (larger than usual sizing): $220–$1,450 installed
  • A double (80-by-60-inches or wider) costs between $420 and $4450 installed.

Material

A hollow core door is the most economical choice, with prices ranging from $30 to $400 on average, with the average price falling between $50 and $150. They are constructed of cardboard slats with wood veneer exteriors, and they are an excellent solution for a location where sound leaking is not a concern, such as a closet. Solid core doors are more expensive, with prices ranging from$70 to $250 for a basic type and upwards of $500 for a high-end one. This type of door is constructed from wood fragments that are bound together with glue.

When it comes to sound insulation, they are a better solution for spaces such as an office or bedroom. Solid wood doors are exactly what they sound like: a door that is totally constructed of hard woods. The cost of a door is mostly determined by the type of wood used to construct it:

  • The cost of red oak and ash ranges from $240 to $420. Maple:$265–$485
  • Paint and stain-grade poplar and maple: $160–$340
  • Reclaimed poplar and maple: $160–$340
  • Prices range from $355 to $590 for hardwoods like as cypress and American and Brazilian cherry. Mahogany, clear pines, circle, cedar, and walnut are also available.

Aluminum doors, which are commonly used as sliding or bifold doors for closets, range in price from $300 to $2,000.

Trim

When the trim is attached, it fills in the gap between the frame and the drywall, giving your freshly installed door a final, finished look. It costs around $2 to $3 per linear foot.

Hinges and Hardware

Hinges cost about $3 apiece, however more expensive variants can cost well into the double digits. Locks and doorknobs range in price from $20 to $200, with the more expensive models featuring more technologically advanced keyed and coded locking mechanisms. A standard knob for an interior door will most likely cost between $20 and $40.

Add-On Details

There are a number of optional and non-optional add-on features and services that will raise the cost of your installation, some of which are listed below. These are some examples:

  • Frame or resize the opening: $40–$75 per hour
  • If drywall work is necessary, the cost per square foot is $1.50 per foot. If you require electrical repair, the cost per hour will range between $75 and $100. The cost of labor for lock installation ranges from $135 to $200 per hour, not counting the cost of the lock. The cost of installing trim is around $2–$3 per foot, with higher-end types costing more. Glass panels and other decorative elements: The addition of glass paneling, carved wood elements, or unique finishing will greatly increase the cost. A hollow core bifold door may be purchased for as little as $30, while a more elaborate version with glass may cost as much as $500 or more.

How Much Does It Cost to Install an Interior Door By Style?

The type of internal door that is installed is the most important aspect in determining the cost of the installation.

Single and Double Bifold Doors

Bifolds are made up of two or more hinged panels that move along a track system. When they are opened, they fold in half, which can be useful for saving space. A single bifold door will cost you between$35 and $60, while a double bifold door will cost you between$45 and $70. The cost of installing this sort of door ranges from $100 to $300 per door.

Pocket Doors

Pocket doors, like bifold doors, are excellent space savers. As opposed to traditional doors that open towards or away from you, these doors glide into the wall. The cost of installing them ranges from $100 to $2,500 per door, depending on the amount of labor required.

French Doors

Zxvisual/E+ courtesy of Getty Images French doors are double doors with a number of glass panes on either side. When they are both opened at the same time, they form a very broad and dramatic opening, which is commonly seen in dining rooms and living rooms alike. Many of the traditional types have hinged doors, while other variants have single or sliding doors instead. In most cases, the cost of installing French doors is between $250 and $500 per door.

Sliding Bypass Doors

In either case, one door may pass through the other through the track, making sliding bypass doors a good choice if you need to put a door across a broad area but can’t afford or don’t have the space for French doors. Installing sliding bypass doors, which are commonly used for closets, will cost between $250 and $500.

Barn Doors

Barn doors are a type of sliding door that has a visible track and are distinguished by its rustic, farmhouse appearance. They are most usually constructed of wood, although they may also be found in other materials, such as steel, on the market. Barn doors will cost you between $100 and $300 to install on a typical basis.

Saloon Doors

Saloon, or swinging cafe, doors have a pivot hinge that allows the door to swing open both forward and backward in the same direction. Expect to pay between $100 and $300 to have a saloon door professionally installed.

Murphy Doors

Murphy doors, which are “hidden” doors that seem like bookshelves, offer a sense of intrigue to your house by creating a sense of mystery.

In addition to providing usable storage space while concealing a doorway to another room, which may be one in which you keep valuables, they also provide a sense of mystery to a place. Installing a murphy door in your home will most likely cost you around $500.

FAQ About Installing an Interior Door

In order to accommodate French doors or construct a more accessible house, expect to pay between $300 and $2,500. The amount you pay will depend on how wide you want the entryway to be expanded, if the wall is load-bearing and other variables.

How much does it cost to have an old door removed?

If you need to remove an old door to make room for a new one, you can expect to pay between $ 150 and $200 for the service. If you require the door to be removed and the space to be walled off, the cost of wall installation will range between $300 and $800.

How Much Does an Interior Door Cost?

Basic Interior Door: $20-$400 Cafe/Saloon Door: $100-$850 Wood Bi-Fold Door: $600-$1,500
Interior doors can be functional – closing off rooms for privacy, cutting down on noise or acting as fire walls if needed – but they can also provide decorative interior touches that add to the style of a home.Typical costs:
  • The cheapest interior door slab (with no frame or hardware) starts at around $20-$100, and the most costly is approximately $40-$150 for one that has been pre-hung in a frame with hardware already fitted
  • They are often made of composite or inexpensive wood and are hollow. A solid wood door may cost between $200 and $500, while a more attractive interior door made of high-end woods such as walnut or mahogany can cost between $500 and $1,000. For example, the ReliaBilt 30″ Wide 6-Panel Hollow Composite Door Slab from Lowe’s store brand costs around $33. It costs $494 to install a 1-3/8″ thick raised panel door in Mahogany from Interior Doors Direct. With six elevated panels, this piece is 36″ wide by 80″ high. Installation can add $50-$300 to the overall cost (labor and materials), bringing the total cost (labor and materials) to $70-$400 for a simple door and $250-$1,300 for a more ornamental solid wood door
  • However, installation is not always necessary. Interior French doors with many panes of glass normally cost $50 to $200 for a basic model, but they may cost up to $1,000 or more depending on the size and style. Price ranges from $300 to $800 for a pair of inside French doors (both opening to the center). Installation can add $50-$300 to the overall cost of a basic French door installation, but it can more than quadruple the cost of a set of two French doors. Two hinged panels that fold together, often hung in pairs, start at about$25-$150 for hollow core wood composite bi-fold doors, while larger solid wood bi-fold doors with attractive embellishments may cost up to $1,500 (including installation). Swinging cafe doors, also known as saloon doors, can cost anywhere from $100 to $300 for a basic set, but can cost anywhere from $300 to $600 or more depending on size, thickness, wood type (knotty pine, ash, oak, cherry, walnut, mahogany, etc.), custom designs, and style details such as louvers, raised panels, rivets, or iron accents. Swinging cafe doors (including hardware) are also known as saloon doors. A set of Pinecroft 36″x42″ Wood Louvered Cafe Doors in clear, unfinished pine (which must be painted or stained) costs$117 at Home Depot, and Interior Doors Directhas a set of 36″ high cafe doors for a 36″ wide opening (two 18″-wide swinging doors) with a two-panel design for$183 in poplar wood and$489 in walnut for$183. Installation might add $50 to $250 (or more) to the final cost of the project. When installed in new construction or during a remodeling job when the walls have already been opened up, a pocket door that slides into the wall when not in use can cost between $400 and $1,000 (labor and materials) for a reasonably uncomplicated installation. In cases where existing walls must be broken out and subsequently refinished, installing a pocket door can cost between $1,000 and $3,500 or more, depending on the materials used, local labor costs and the degree to which the job is complicated. Installation of a barn-style sliding door that glides on a track along a wall can cost between $200 and $1,000 for all supplies, or between $300 and $1,500 with installation
  • Do-it-yourself installation is an option. Instructions for replacing an interior door with a door blank (no frame, holes, or hardware) are provided by ThisOldHouse.com, who describes it as a moderate to difficult project that requires careful planning and attention to detail, takes about 4-6 hours, and costs between $80 and $200 for the door and $40 to $100 for a lockset
  • And instructions for installing a pre-hung door, which are estimated to be a moderately difficult project that takes 4-6 hours and costs between $60 and $600
Related articles:Painting an Interior,Exterior Door,Closet Door,Pocket Door,French Doors,Door Lock
Additional costs:
  • The cost of a plain interior door slab (without a frame or hardware) ranges from $20 to $100, while the cost of a pre-hung door in a frame with hardware is from $40 to $150. These doors are often constructed of composite or low-cost wood and are hollow in construction. A solid wood door may cost between $200 and $500, while a more attractive interior door made of high-end woods such as walnut or mahogany can cost between $500 and $1,000 or even more. The ReliaBilt 30″ wide 6-panel Hollow Composite Door Slab from Lowe’s store brand costs around $33. a 1-3/8″ Thick Raised Panel Door in Mahogany costs $494 from Interior Doors Direct Six elevated panels are 36″ wide by 80″ high. For a simple door, installation can add $50-$300, bringing the total cost (labor and materials) to $70-$400, while a more beautiful solid wood door can cost $250-$1,300. Interior French doors with many panes of glass normally cost $50 to $200 for a simple type, but may cost up to $ 200 to $1,000 or more depending on the size and design. Price ranges from $300 to $800 for a pair of inside French doors with both doors opening to the center. It is possible to add $50-$300 to the overall cost of a single French door installation, but it is possible to quadruple the cost of a pair of French doors. Two hinged panels that fold together, often hung in pairs, start at about$25-$150 for hollow core wood composite bi-fold doors, while bigger solid wood bi-fold doors with attractive embellishments may cost up to $1,500 (including installation) for larger models. swinging cafe doors (also known as saloon doors) are available in a variety of sizes and materials. The cost of a basic set (which includes hardware) ranges from about $100 to $300 but can reach $300 to $600 or more depending on the size, thickness, wood used (knotty pine, ash, oak, cherry, walnut, mahogany, etc.), custom designs, and style details such as louvers, raised panels, rivets, or iron accents. A set of Pinecroft 36″x42″ Wood Louvered Cafe Doorsin clear, unfinished pine (which must be painted or stained) costs$117 at Home Depot, and Interior Doors Directhas a set of 36″ high cafe doors for a 36″ wide opening (two 18″-wide swinging doors) with a two-panel design for$183 in poplar wood and$489 in walnut for$183. Amounts ranging from $50 to $250 (or more) can be spent on installation. When installed in new construction or during a remodeling job when the walls have already been opened up, a pocket door that slides into the wall when not in use can cost between $400 and $1,000 (labor and materials) for a reasonably simple installation. In cases where existing walls must be broken out and subsequently refinished, adding a pocket door can cost between $1,000 and $3,500 or more, depending on the materials used, local labor costs and the degree to which the job is involved. If you want to build a barn-style sliding door that glides on a track along a wall, it will cost $200-$1,000 for all supplies and $300-$1,500 for labor
  • You can do it yourself. Using a door blank (with no frame, holes, or hardware), ThisOldHouse.com describes it as a moderate to difficult project that requires careful planning and attention to detail, takes about 4-6 hours and costs between $80 and $200 for the door and $40 to $100 for a lockset
  • And instructions for installing an interior pre-hung door, describing it as a moderately difficult project that takes about 4-6 hours and costs between $60 and $600 or more depending on the door style and material.
  • The numerous types of interior doors are described in detail by Home Depot, including their styles, materials, and installation concerns. Interior door ideas may be found in the photo galleries of manufacturers Jeld Wen, Simpson, and TruStile. There are several companies that sell interior doors, including The Inside Door Replacement Company, which provides a wide choice of materials as well as installation, and Interior Doors Direct, which sells solid wooden interior doors in custom and standard sizes and designs. Interior doors can also be purchased through local lumberyards, home improvement retailers such as Home Depot and Lowe’s, or by contacting the American Window and Door Institute, which will help you locate a local door and window dealer. Ensure that the installation contractor is legally insured, bonded, and licensed before engaging them. Also, ask for and check references before hiring them.
CostHelper News
What People Are Paying – Recent Comments
Posted by:Jose A Hernandez in Reading, PA. Posted:March 3rd, 2016 08:03AM
Door Type:6 panel solid wood Brand:
Posted by:Mary P. in sandusky, OH. Posted:September 12th, 2012 06:09AM
Door Type:prehung interior Brand:jeldwen
This article is very good with the cost estimates. Very helpful. when it comes to installing the actual door, use door installation brackets instead of shims, saves some real frustration. Door aisle of homedepot, orange bag.
Posted by:kendra in reno, NV. Posted:July 25th, 2010 03:07PM
Door Type:mirrored Brand:
Need to replace mirrored closet doors after a tenant broke them. Not sure how much to withhold from deposit because of this, any ideas?
Posted by:a user in cape coral, FL. Posted:August 29th, 2009 04:08AM
Door Type:moulded interior prehung Brand:Jeldwyn
had 4 prehung doors, 7 closet doors to paint and install, with removal of old doors, picked up and delivered and want to know if price was good
External Resources:
  1. Ns=p p
  2. StoreId=10051 catalogId=10053 superSkuId
  3. LangId=-1 s
  4. Cid=36

More Articles on the Subject of the Home and Garden

Check Out All Costs for Home and Garden How Much Does Pressure Washing Cost? How Much Does a Central Air Conditioner Cost? How Much Does a Deck Cost?
CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy.

Interior Doors

The style of your interior doors, from bedroom and closet doors to pantry doors, is vital in bringing your space’s overall design together, whether it’s in the bedroom or the pantry. Furthermore, when it comes to choosing the ideal doors for various areas in your house, Lowe’s has a large range to pick from. What’s Hot Right Now Barn doors are a popular choice right now, since they provide a beautiful, rustic aspect to any interior design scheme. Swap out your typical closet door for a closet barn door, or use it to create a transition between two rooms, to make a dramatic statement in your home.

  • The majority of the time, you’ll find these as closet doors.
  • Although sliding closet doors are the most common sort of door in our homes, you can use this style of door in a variety of other sections of your house as well.
  • French Doors are a type of door that may be opened from the inside or the outside.
  • It is possible that an internal French door would be the ideal addition for home offices located off the foyer, dining rooms, or any other location where you would wish to create a light and open atmosphere.
  • Whether it’s bifold doors or accordion doors, these space-saving solutions fold to open to maximize available area.
  • Other considerations when selecting a new door include the core type — solid or hollow — as well as the hardware and material used.

Lowe’s sells a selection of interior doors, ranging from glass interior doors that allow light to seep through to classic wood panel doors. Find the perfect door for your home by browsing our collection on Lowes.com. You may order online and pick it up in store, or view our door selection in person.

Homewyse Calculator: Cost to Install Interior Door

January in the next year, 2022

Itemdetails Qty Low High
Interior Door CostNon-discounted retail pricing for: 30″ x 80″ hollow core 6 panel slab interior door. Primed for paint.Quantity includes typical waste overage, material for repair and local delivery. 1 doors $50.84 $77.66
Interior Door Installation Labor, BasicBasic labor to install interior door with favorable site conditions. Measure, trim and plane door to fit existing door jamb. Mark and mortise hinge locations. Install hinges. Fabricate holes, mortises for door handle set and jamb strike plate. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 1 doors $50.84 $77.66
Interior Door Installation Job SuppliesCost of related materials and supplies typically required to install interior door including: fasteners, connectors, surface preparation and finishing materials. 1 doors $50.84 $77.66
Interior Door Installation Equipment AllowanceJob related costs of specialty equipment used for job quality and efficiency, including: Pneumatic finish nailer, 10″ miter saw, electric jigsaw, 3″ belt sander, 3 1/4″ electric planer. Daily rental. Consumables extra. 1 doors $50.84 $77.66
Unused Minimum LaborBalance of 2 hr(s) minimum labor charge that can be applied to other tasks.
Totals – Cost To Install Interior Door
Average Cost per Door

Custom Calculators with Homewyse Lists

Service Professionals: develop a reusable estimating software that is completely tailored to your company’s needs and procedures. Make use of one of the templates provided or create your own (both are free; account registration is required): The cost to Install an Interior Door for a simple project in zip code 47474 with one door starts at $304 – $470 per door for a one-door entryway. Job size, circumstances, and alternatives will all have an impact on final prices. To get an idea of how much your project will cost, do the following: Set the zip code for the project in step one.

2.

To begin, enter the number of “doors” that will be necessary for the project.

Recalculate the results To make changes, click the “Update” button.

Unit Costs: How Pros Price

Instead of publishing prices from unrelated tasks in the past, Homewyse produces up-to-date estimates based on currentUnit Costs, as opposed to other websites. Due to the use of location, information, and alternatives tailored to the specific requirements of each work, the Unit Costmethod provides great accuracy. Businesses in the construction, commerce, design, and maintenance industries rely on the Unit Costmethod for transparency, accuracy, and equitable profitability.

Homewyse Calculator: Cost to Hang Interior Door

January in the next year, 2022

Itemdetails Qty Low High
Interior Door CostNon-discounted retail pricing for: 30″ x 80″ hollow core 6 panel slab interior door. Primed for paint.Quantity includes typical waste overage, material for repair and local delivery. 1 doors $50.84 $77.66
Interior Door Install Labor, BasicBasic labor to hang interior door with favorable site conditions. Measure, trim and plane door to fit existing door jamb. Mark and mortise hinge locations. Install hinges. Fabricate holes, mortises for door handle set and jamb strike plate. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 1 doors $50.84 $77.66
Interior Door Install Job SuppliesCost of related materials and supplies typically required to hang interior door including: fasteners, connectors, surface preparation and finishing materials. 1 doors $50.84 $77.66
Interior Door Install Equipment AllowanceJob related costs of specialty equipment used for job quality and efficiency, including: Pneumatic finish nailer, 10″ miter saw, electric jigsaw, 3″ belt sander, 3 1/4″ electric planer. Daily rental. Consumables extra. 1 doors $50.84 $77.66
Option: Frame Interior Door OpeningMeasure, cut and secure header, trimmer studs(2), king studs(2) and cripple studs. Trim bottom plate to opening. 1 doors $50.84 $77.66
Unused Minimum LaborBalance of 2 hr(s) minimum labor charge that can be applied to other tasks.
Totals – Cost To Hang Interior Door
Average Cost per Door

Custom Calculators with Homewyse Lists

Service Professionals: develop a reusable estimating software that is completely tailored to your company’s needs and procedures. Make use of one of the templates provided or create your own (both are free; account registration is required): The cost to Hang an Interior Door for a simple project in zip code 47474 with one door starts at $304 – $470 per door for a one-door project. Job size, circumstances, and alternatives will all have an impact on final prices. To get an idea of how much your project will cost, do the following: Set the zip code for the project in step one.

2.

To begin, enter the number of “doors” that will be necessary for the project.

Recalculate the results To make changes, click the “Update” button.

Unit Costs: How Pros Price

Instead of publishing prices from unrelated tasks in the past, Homewyse produces up-to-date estimates based on currentUnit Costs, as opposed to other websites. Due to the use of location, information, and alternatives tailored to the specific requirements of each work, the Unit Costmethod provides great accuracy. Businesses in the construction, commerce, design, and maintenance industries rely on the Unit Costmethod for transparency, accuracy, and equitable profitability.

How Much Does It Cost To Install An Interior Door?

According to the National Association of Home Builders, the national average material cost to build an interior door is $48.00 per door, with a range between $38.62 and $58.99.

The total cost of labor and supplies for each door is $317.89, with prices ranging from $249.83 to $385.96 per door. You will receive an accurate quote based on your location, task size, weather conditions, and the finish options you select.

cost to install an interior door
National Avg.MaterialsCost perdoor $48.80
National Avg. Cost (labor and materials) for1door $317.89
National Cost Range (labor and materials) for1door $249.83-$385.96

Interior door installation cost

A new internal door costs around $730 on average to install, according to Home Advisor. This cost might be lower, closer to $360, or higher, at roughly $1,100, depending on whether the door is included or not. If you want to employ a professional, you should budget an additional $100 to $300 for labor expenditures. Basic doors may be purchased for as low as $50, while high-end or one-of-a-kind doors can cost upwards of $500. Adding a set of French doors will increase the cost even more, with an average cost of $4,500 or more.

Cost to replace interior door

When you repair an inside door, you will also need to remove and replace the frame around the door. Don’t forget to include the cost of disposal fees in your calculations as well. An old inside door requires an additional hour of effort on average to remove and dispose of it, according to the BBB. The amount of any disposal costs required may vary depending on your region, however they can range from $25 to $50. In some cases, if your present door is in good shape, some contractors may be willing to lower the price of removing your old door since they may be able to repurpose it on another project.

Your door trim should be replaced in no more than three hours if you hire a skilled carpenter with expertise.

Decorative hardware, like as hinges and knobs, can cost as little as $10 to as much as $150.

The cost of interior door hardware installation can range from $75 to $150 depending on the locksmith’s charge, which may or may not include travel time.

Labor cost to install an interior door

Be prepared to pay between $40 and $90 per work hour to install your new inside door, with the average hourly rate often being approximately $70. Most installations should take between three and five hours to complete in total, according to the manufacturer. It will take less time to install a pre-hung door rather than a complete replacement that includes the installation of a new door frame. Creating a frame for a slab-style door on site is another option for those who like a more traditional appearance.

Slab doors

This sort of door can cost anywhere from $50 to $400 and refers to a door that is neither framed or equipped with hardware. The holes for the doorknobs and hinges may be predrilled in certain slab doors, but many need the contractor to drill the holes himself.

Frame

An ordinary door frame costs between $150 and $300, not including the cost of the 2×4″ posts that must be placed in the wall to hold it. A door frame is a casement that covers the post in the wall and offers an area where door hinges may be mounted.

Trim

It is estimated that door trim will cost roughly $2 to $3 per linear square foot and refers to the boards that are used to fill in the space between the frame and the drywall in order to give your new inside door a smooth, completed look.

Hingeshardware

Designer hinges can cost up to $10 or more each pair, whereas the ordinary hinge costs approximately $2.50 a piece. A doorknob and lock may be purchased for between $20 and $200, while a simple knob can be purchased for between $20 and $40. Consult with many contractors in your area to acquire an estimate, just like you would with any other project. Investigate the materials they use in the installation and whether or not you will be needed to acquire items like as hinges and knobs on a separate basis.

Interior door types

The following are the most popular interior door kinds to pick from, along with an estimate of their costs:

Flush door

A flush internal door is a low-cost solution that may be fabricated from a range of different materials. Flush doors have a flat, smooth appearance that allows the door to be flush with the frame. They range in price from $20 to $200 per door. This solution is ideal for closets as well as for contemporary room designs.

Pivot door

A pivot door is a huge, single door that has a single hinge in the middle. Because it can be opened from either side and pivots on the hinges, it is an excellent choice for kitchens, but it is not as suitable for bedrooms or bathrooms because to its big size. The usual cost of this door is between $200 and $2,000, depending on the materials used.

Panel door

For increased visual appeal, panel doors are the most popular choice, as they have inset panels on the face of the door rather than the sides. Panel doors are available in a variety of materials and designs, and they are suitable for use in a wide range of rooms and common spaces. Depending on the material, you should expect to pay anywhere from $25 to $500 per door.

Pocket door

If you need to preserve space, pocket doors are a good option since they slip into the wall rather than opening in an outward orientation. The use of pocket doors is great for tiny places such as bathrooms and bedrooms, but they are more expensive to install and more difficult to repair than other types of doors. It costs between $120 and $1,000 to install a pocket door.

French door

The use of French doors, which are made up of two glass doors with multiple panes or panels, may provide a high-end touch to any room. A single, wide opening between rooms, or between a porch or patio, is created when all of the doors are opened at once. French doors are a magnificent addition to any living or dining room, and they may range in price from $200 to $4,500 on average.

Dutch door

Because a Dutch door is separated into two portions down its middle, it is possible to open it with the top and bottom of the door opening independently if desired. The majority of Dutch doors are robust and built of solid wood, making them an excellent choice for kitchens or households with pets. Starting at around $500, a Dutch door can cost significantly more depending on the size and material used.

Roller door

Roller doors are commonly found in modern homes, and they are particularly well suited to industrial-style interiors.

An overhead roller door is one that slides upward on a roller and runs over the ceiling, making it a suitable choice for saving space. Despite their low cost, roller doors are both expensive and difficult to maintain, with prices beginning at $500 per door and rising from there.

Barn door

When it comes to the rustic aesthetic, barn doors are a fascinating option to consider. As opposed to traditional doors, these doors are suspended from a metal track, which the door slides along from side to side rather than opening outward. Barn doors, which must have enough space to move sideways across a wall, can cost anywhere between $150 and $2,000 on average, depending on the size.

Sliding door

Sliding doors are made up of two sliding panels or a single door with a fixed panel, depending on the design. The doors pass each other as they move on parallel tracks, and they’re especially useful for openings with large thresholds where a barn door or a set of French doors would be inconvenient. Sliding doors are hefty and have a tendency to fly off the track; they cost roughly $500 for a pair.

Bifold door

Each of these doors is composed of numerous panels that fold in on itself when the door is opened. The majority of bifold doors are used for closets, and they require a track in order to glide on. Bifold doors are priced from $100 to $2,000, depending on their size.

Saloon door

A saloon door (also known as a cafe door) is a type of door that is comparable to the doors that were used in the old west. These double-doors swing open in the middle and are often suspended in the middle of the door frame above the ground to provide for easy access. Saloon doors can range in price from $150 to $500 or more, depending on the brand, material, and design chosen.

Murphy door

These one-of-a-kind doors are designed to seem like a bookcase, and they frequently lead to a secret area. Murphy doors, which are ideal for safes or panic rooms, may be purchased for between $600 and $4,500, not counting the cost of installation.

Interior door material

Wood, glass, and composite wood are the most common materials used for interior doors. Depending on the material, a solid wood door may cost anywhere from $150 to $850, while a hollow-core door might cost anywhere from $30 to $240. Solid core doors are priced between $60 and $330 and are composed of composites rather than actual, solid wood, resulting in a design that is lighter in weight and more energy efficient. Interior doors made of aluminum can range in price from $40 to $500. Frameless glass doors, while less expensive than solid glass doors, still require some form of frame to keep the glass in place.

It is possible to purchase an interior door made of MDF for $30 to $400.

Interior door replacements by room

A frame and replacement door installation project’s cost varies based on the size of the frame, the kind of material used, and the intricacy of the installation. It’s critical to select the appropriate door type for each room, which includes:

Bedroom and bathroom doors

For these rooms, a solid core door is recommended since it helps to offer appropriate noise suppression while also improving seclusion.

Solid wood is also a good option, but it will not absorb sound as well as a solid core door with foam insulation. These doors are around $50 to $200 more expensive than hollow-core doors.

Closets doors

For smaller closets, a single door should suffice, while a bifold or sliding design should suffice for bigger closets. For a slider or bifold door, you may expect to pay twice as much as you would for a single door.

Kitchens and dining rooms doors

When it comes to certain areas of the home, a set of French doors may be a very attractive alternative. These doors are also a great method to divide the rooms and make it easy to get in and out of the space if your hands are already occupied elsewhere.

How to install a prehung door?

A prehung door is one that has the frame, hinges, and all of the hardware installed previously. Because these doors are pre-finished and ready to hang, they need significantly less time to install. It is common to see this sort of door in new construction homes or in spaces where the original door frame is too damaged to hold the structure of a new door, such as bathrooms. You can either install these doors yourself or engage a professional to assist you in making sure that everything is aligned properly and securely before closing the door behind you.

On average, it costs between $316 and $488 to install a prehung door, depending on the size of the door.

Prior to nailing the door jamb and frame together, they are cut to suit the opening, and cleats are used to keep the frame in place while it is being put in.

Following a last check of the work to ensure it is level, the fame is nailed into the studs of the door opening and the door is fitted.

Interior door sizes

A typical inside door should be a minimum of 80 inches in height, which is the usual size for most homes in the United States. The width of a conventional interior door is available in the following sizes: 24, 28, 30, 32, and 36 inches wide. If you need to build a new door for an elderly relative or someone who requires help, the minimum width should be 36 inches in order to accommodate them. Closet doors are often narrower than most ordinary doors, although the doors to other rooms are normally between 30-36 inches wide.

Cost to Replace an Interior Door – 2021

Would you be interested in taking on this project? According to our poll results, 53 percent of respondents opted to do it themselves rather than hire a professional. In order to compare a contractor’s estimate with the cost of doing it yourself, the average price to Replace an Interior Door shown above should be used as cost data. What is the cost of an inside room door? The cost to hire a contractor to repair an inside door is $654, but doing it yourself would cost you $245. Interior doors with thin, hollow cores may be replaced with modern molded six-panel solid-core doors that look nicer and are more substantial while also reducing the transmission of sound throughout your house.

  • An internal door that is normal in size and is being replaced with a sound-deadening door will cost $654 to have removed and replaced by a carpenter.
  • You may save 63 percent by purchasing the door, hinges, and lockset to replace the old door yourself for $245, rather than hiring a professional.
  • Pay close attention to the placement of the hinges while replacing them and take your time when installing the new ones.
  • If the old knob is still in good condition, you may simply remove it and reinstall it on the new door to save a little money on labor.
  • Allow for approximately 3/16 inch clearance on the width of the door.
  • Any cut surfaces should be sealed with an effective coating recommended by the manufacturer.
  • Due to the fact that, in order to trim down a door, you must first remove it from its hinges, transfer it to a work area, and then plane down the surface, this is an easy error to make.
  • Installing Interior Doors by Jeld-Wen is a step-by-step guide that includes photos and diagrams.

Knowing the average cost to replace an interior door, which includes both labor and materials, as well as the steps necessary, you can determine whether to do it yourself or call a professional to do the job.

Gene and Katie Hamilton

Welcome! When determining whether to tackle a home renovation project yourself or hire a contractor, we hope you will find the job expenses of home improvement projects to be helpful. Authors of more than a dozen home improvement books, including Home Improvement for Dummies, Bathroom Remodeling for Dummies, Carpentry for Dummies, Plumbing for Dummies, Painting and Wallpapering for Dummies, and Painting and Wallpapering for Dummies. The second edition of our most recent book, Fix It and Flip It, is now available.

How much does it cost to install an interior door?

Find out how much it will cost in your city. Get the task done in three simple steps. 1Howmuch.net locates the most qualified and highly rated contractors in your region. 2Contractors will provide you with free, tailored quotes. 3Compare quotations and choose the contractor that would best meet your requirements. The installation of a new internal door is one of the quickest and most straightforward home upgrades you can do. If the door frame is pre-existing, the project will not necessitate a significant amount of effort, and even if the door frame is upgraded, the cost will be fair.

Additionally, the materials that are utilized in the manufacturing of the door have an influence on the final price.

The decision to paint or stain a door will also increase the overall cost.

This guide to interior door installation prices will take a variety of door types and pricing into consideration.

Item Cost
Wooden door $85-$125
Aluminum door $300-$450
Slab door $30-$100
Extras:Paint the doorLocksetConstructing and repairing a door frameDoor trim – decorativeKickplates $100$35-$50$300-$700$175$50-$129
Labor $100-$300
Total Cost $515-$2,129

Other considerations and costs

  • Many property owners are surprised to hear that their contractors or repair specialists might offer them discounts if they require more than one door to be installed on their property. Many companies also provide a discount if doors are ordered via their service rather than directly from the manufacturer. Slab doors are often less expensive than prehung doors by around $100 or more, but they require the frame to be in great condition in order to be installed properly. A professional measurement by the contractor will be required prior to purchasing and installation
  • This will incur additional fees.

DIY considerations

  • Many property owners choose to undertake their own door installation, only to later come to regret their decision. Instead of the installation itself being problematic, the removal of the jamb, existing moldings, and casing might prove to be a significant undertaking. It is typically a matter of seconds to hang a door, especially for a professional, but it requires talent to repair a door to its original excellent looks or restore it to a restored and appealing state. If the door is a relatively popular slab form that just requires the hinges to be correctly installed, it may not be a tough chore for the experienced do-it-yourself enthusiast to do. It is usually advisable to employ a professional for the removal, measuring, installation, and completion of any interior door installation if you do not have the necessary skills.

References

  • Costbook for Craftsman Estimators, whole series for the year 2019. The most recent pricing were discovered on the Home Depot and other vendor Web sites
  • DIY Web sites are the subject of a review of the literature.

In your city, how much does it cost to have an internal door professionally installed? Estimates may be obtained by inputting your zip code.

Cost by city

  • New York, NY$2,120
  • The Bronx, NY$1,742
  • Brooklyn, NY$1,452
  • Philadelphia, PA$1,812
  • Washington, DC$1,572
  • Atlanta, GA$1,422
  • Miami, FL$1,294
  • Fort Lauderdale, FL$1,355
  • Minneapolis, MN$1,590
  • Chicago, IL$1,852
  • Houston, TX$1,910
  • San Antonio, TX$1,282
  • Austin, TX$1,452

Local expenses have been computed by taking into consideration the differences in labor and material prices across various cities. In order to receive accurate cost estimates, please include the following information:

Interior Door Installation Cost: How Much Does It Cost To Install?

Interested in upgrading or replacing the inside doors in your home? This was a wise decision. Investing in new doors is a cost-effective approach to update the appearance of your house and its furnishings. In addition, it is not required to burn a giant hole in your pocketbook. Because it breaks down the interior door installation cost for you, this detailed guide will assist you in creating a budget that is acceptable for your remodeling project. Are you thinking of upgrading your home? You can get a good sense of the overall cost of your remodeling job by using our free home renovation estimator.

Inside and out, you must understand the expenses of interior door installation, starting with the design or kind of door you pick and progressing through its functionality, features, position, size, frame, customisation, and labor costs.

It’s simple and quick to put to use! So, let’s start with the most crucial question of all on this subject: what is the meaning of life?

How Much Does It Cost To Install An Interior Door?

The cost of an interior door installation can range from $50 to $ 1500, depending on the type of door and hardware used (the materials), as well as the price of a professional installation. The average cost of an inside door is roughly $500 for most houses. Please keep in mind that an internal door is significantly less expensive than an outside door. Furthermore, it is less difficult to install, which lowers the labor cost as a result. What do you think about a sliding door? Visit this page for more information about Sliding Glass Doors Prices, Cost Factors, and Types!

Interior door cost factors

When determining the cost of interior door installation, there are a few major considerations that have a significant influence on the final overall cost of the project. Let’s have a look at some of them.

Instantly estimate the cost of your remodel.

Alternatively, you may take your time to customise hundreds of options to turn your house into your ideal house.

Types of interior doors

The inside door of your home has a significant influence on the overall design plan of your home. It is possible to select the most appropriate style, design, and form for your home based on your personal preferences. Among the numerous alternatives are:

Type of door Features Price range
Sliding doors
  • Known for their efficiency and space-saving design, these appliances are quite popular. Made of wood, glass, or cores with mirrors added to the back
  • This item is suitable for use in hallways or bedroom closets.
  • Provide a traditional and beautiful appearance
  • The doors contain separated glass panes that must be overlapped in order to open the doors. A good amount of light should be let into the room. Generally speaking, they don’t provide much privacy. The designs are available in either single or double configurations.
  • Doors with segments and hinges
  • Typically utilized in tiny places such as laundry rooms, pantries, and closets, this type of flooring is extremely durable. When the track is open, the head track should be folded to the side.
  • Space-saving
  • Slide up against the wall
  • A system that is effective
  • Laundry rooms are frequently utilized in this manner. Installation will need sufficient wall space
  • Hefty, large entrance doors
  • Attached to a sliding system that is installed on the wall Larger areas benefit from this feature since it provides privacy. If not supported by a bottom rail, they have a tendency to swing.

Continue reading:16 Different Types of Doors

Interior door materials

Interior doors, trim, and millwork are all constructed of wood or a wood-polymer composite material. A wood composite is a wood-based composition containing wood fibers, reconstituted wood, or medium-density fiberboard that has been bonded together (MDF). It does not warp in the same way that a wooden door does. Additionally, it is less difficult to paint and maintain. Keep in mind, however, that it is lightweight and may chip from the bottom over time because to its low density. The majority of wooden doors are either paneled or entirely built of wood.

The benefit of these hefty doors is that they provide seclusion while also effectively soundproofing a space.

If you have a bathroom or any other moist environment, avoid using wood doors.

See our entire guide on Composite Door Prices for more information.

Labor cost

Photo courtesy of Freepik Always keep in mind that labor costs for installing interior doors typically range between $40 and $90 per hour, with an average rate of $70 per hour. Of course, the exact amount will vary depending on your zip code, the location of the door, and the difficulty of the job. The majority of interior door installations take between 3 and 5 hours on average.

Hollow vs solid core composite doors

Another thing to consider is whether you like a hollow-core door or a solid-wood paneled door for your entrance. It goes without saying that the lightweight hollow-core door is affordable. It is best suitable for closet doors or pantry doors because it does not have any soundproofing properties in its natural state. The solid-wood paneled door, which is heavier and more robust, but also more expensive.

A wide range of new designs, materials, and high-quality production are available to you. An internal door with a solid core (not to be mistaken with a solid wood door) is an excellent solution for a bedroom where you need to decrease interior noise while maintaining maximum private space.

Pros Cons
Long-lasting Expensive option
Easy to clean May scratch, stain, crack or cut with sharp knives
Can be sanded or resealed Bacteria may pose a problem
Looks beautiful and warm Requires regular sealing and oiling

Slab door vs prehung door

It makes a difference whether you purchase a slab or a pre-hung inside door in terms of overall cost to install an internal door. While a slab door is one that can be easily installed in the event that your current door frame is still in good condition, a pre-hung door is one that is already placed in its frame and includes all of the essential elements — the door, a frame, and hinges — to complete the installation (attached to the doorjamb). A slab door, which does not include a frame or any hardware, ranges in price from $50 to $400 on average.

More information may be found at: Installing a prehung door is a simple process.

DIY project or a professional job

Photo courtesy of Freepik If you have a lot of DIY knowledge, you might be able to put in an internal door yourself. As a consequence, because the job needs carpentry details, we recommend that you use a professional door installer to provide the best results and finish. It is true that professional installation will be more expensive, but a poor DIY installation may result in greater replacement and maintenance expenditures down the road. A professional will be able to manage the whole installation and all of its components, including frame, swing direction, handles, and hinges, as well as the components themselves.

Before you begin the job, make sure to obtain competitive bids from at least three contractors and to review each contractor’s prior work.

Other enhancement and improvement costs

There are other expenses that must be taken into consideration. Among these are the expenses of components such as frames, trims (the boards that fill the space between the frame and the drywall), and fasteners, among other things.

  • $150 to $300 for the frame, $2 to $3 per linear foot for trim, $2.50 for each hinge, $10 or more for hardware, $20 to $200 for locks and knobs (keyed or coded locks), and more. Painting an interior door costs $75-$125
  • Constructing or repairing a door frame costs $300-$700
  • Removing and disposing of old doors costs $100
  • And fixing a door frame costs $75-$125.

Conclusion

Interior doors (and, for that matter, entry doors) have the ability to create or break the overall appearance of your home. Poorly constructed doors are an eyesore for your friends and houseguests, and you don’t want that to be the case. Prior to upgrading or installing new doors in your home, it is recommended that you obtain an estimate for door installation, as well as information on the numerous aspects that influence the price. Your renovation project will be simple and virtually seamless.

Written byRamona Sinha.October 30, 2019

Ramona works as a content writer for the Kukun website. Using simple and short language, this seasoned blogger attempts to comprehend the complicated phenomena known as life. As an ardent traveler, she considers herself to be a digital nomad at heart, and she is a passionate animal lover from the depths of her being.

Leave a Reply

Your email address will not be published.