How Long To Paint Interior Of House

Painting a Room or House: How Long Does It Take?

When you buy a property, you accept themaintenance and upkeep coststhat come with it. When those costs start piling, you’re bound to hunt for improvements you can handle yourself. It’s possible that one of the first DIY tasks that comes to mind is painting the inside or outside of your property. As a former home painter myself, let me be the first to tell you: You can do it yourself. Even though I painted for three summers during college and grew far more patient and meticulous with a brush as a result, I have no reason to suppose that I am a better home painter than you.

They’ll perform impeccable work.

We’ll simply do okay.

Home painters cost a reasonable amount since a great paint job preserves your home and may even boost property value.

In such situation, you may be thinking how long does it take to paint a room?

How long does paint last?

(Just joking —nocatastrophe.)

What does painting a house do for home value?

Those of you who have experienced a negative first impression know that people acquire ideas about things extremely quickly, even when they are not aware of it. The same is true for residential properties. A lovely home with a sound foundation just doesn’t seem right when the paint is cracking and peeling away from it. The majority of potential house buyers are unaware of how to evaluate the structural soundness and quality of a property from the exterior. Instead, they’ll look at factors like the window location, the quality of the shutters, and, of course, the state of the paint.

  • If you’re planning to sell your home, a fresh coat of paint will give the house a welcome facelift while also increasing the value of your property practically instantly.
  • The simple act of painting the front door may enhance the value of a property by as much as $6,000.
  • When you consider that the typical home paint job costs around $2,500, the investment is definitely worth it.
  • An interior renovation should endure for up to ten years.

How long does it take to paint a room?

One advantage of hiring experienced painters is that they are more likely to complete the job faster than you. They have a team, but you may just have a spouse or a positive mindset to rely on for assistance. In spite of this, a professional paint crew will spend two to four days (about 8-16 hours) on a 10′ x 10′ room since preparation, priming, and painting are time-consuming tasks.

You should expect to spend much more time painting whether you are painting a room by yourself or with a partner. The following is an example of how the time should be divided:

How to paint a room

Before you begin working, clear the room of all unnecessary items. This is something I’m going to repeat again and italicize to make sure it gets through. Before you begin working, clear the room of all unnecessary items. Not only to the middle of the room, but also outside of the room. Paint has a way of violating the laws of physics and has a nasty, anthropomorphic tendency for destroying treasured items. It’s a hassle, but it’s worth it. Remove all of the furniture and everything on it and place it in a room where there will be no paint applied to anything.

(Because paint soaks through lightweight materials and bedsheets, invest in professional-grade paint.) Once all of the furniture has been removed, begin by going through this checklist:

  • Cover the floor with a drop cloth, ensuring sure it is coiled up at the corners so that the paint is directed onto the cloth rather than the wall
  • Remove any wall decorations, including light switch covers, photo frames, and other mementos, from the room. Spackle or caulk should be used to repair any holes, dings, or dents in the walls. Painter’s tape should be used to mask off the baseboards, window frames, and the sport where the ceiling meets the wall. If you’re using various colors of paint, it will make cutting a lot less difficult. Remove any flaking paint and sand down any exposed wood before painting.

2. Cutting in: 2-3 hours

Once the preparation process is completed, you will have a stunning new canvas to work with. However, before you begin slapping at the walls with a roller, you should complete the most difficult tasks first. “Cutting in” refers to the process of painting the edges of walls, windows, door frames, and other irregular surfaces using a paintbrush. It is not possible to roll paint up to the edge of a window and expect the roller to just stop painting. You can see where you’re going to stop painting so you don’t mistakenly paint areas of the room you don’t want painted or paint parts of the room that are a different color than you intended to paint.

As a result of the actual method that is required, it is the most artistic element of the process: You’ll be able to see very quickly how good (or awful) you are at it based on the stray pieces of color that appear on the white trim of the room.

  • Make a tiny brush with angled bristles and a medium-sized brush with angled bristles an investment. Cut around windows and where the wall meets the ceiling using a medium-sized brush. Small brushes should be used to clean around corners and around doors. Make use of a lightweight paint cup with a handle so that you can wipe extra paint off the brush and keep drips to an absolute minimum. Instead of using a ladder, consider using a platform bench. Given that the majority of rooms aren’t tall enough to require a ladder, a bench allows you to cover more land.

3. Priming and painting: 2-3 hours

The time has come for home insurance advertisements to begin airing. Because there is so much area to cover, it is the quickest element of the task, but it is also the most time-consuming part. However, once you’ve cut in, all you have to do is roll paint onto the walls and check to see that you’ve covered everything completely. Using a 14-18 inch roller is preferable than using a conventional 9-inch roller if you’re working alone. It will allow you to cover more surface area with each stroke while also saving you time.

Prime any exposed areas first, and then paint over them.

4. Cleaning up: Up to 1 hour

Once you’ve applied the paint, you’ll need to wait for it to dry completely.

A few hours later, it’s time to put everything back together in its proper place. Remove the painter’s tape, replace the switch plates and photos, and re-arrange the furniture in the room. Overall, a 10″ by 10″ room should take you somewhere between 6 and 10 hours to complete.

How long does it take to paint a house?

Naturally, the amount of time it takes to paint a complete house varies from house to house, but it will take far longer than painting just a single room. Before the invention of the time estimate, experts calculated the time it would take to paint a building using a method known as “piecework.” This technique split each area of a house into pieces, with the requisite painting time given by a foreman. A painter’s compensation was determined by the number of pieces they completed in a given period of time.

Having said that, piecework makes sense for those who are not experienced painters since it allows you to have a sense of success when each section of the house is done and painted.

It is all up to you.

How to paint a house

The reason I’d recommend painting a house in sections is that it requires a lot of movement to paint a whole house. When you begin to prepare, it will become evident what you should do. Because it is likely that your home does not sit on a level bed of sand that will absorb any chipped paint, you should prepare by laying down a wide canvas over the area where you will begin scraping paint. Move the canvas as you move your ladder to reach high places on the home, scraping away any damaged or peeling paint above the canvas.

While you’re scraping, use a piece of sandpaper to smooth down any exposed wood so that the primer can adhere more effectively.

Painting is a messy endeavor, and you will inevitably ruin your clothing beyond repair.

2. Priming

Start with the trim when priming (and while painting) because it is the most visible. Priming any exposed wood or siding should be done with a large paintbrush. It is not necessary to prime paint that is still there since it will act as a primer on its own. Using painter’s putty or wood filler, you may repair any damaged trim on your house that you are unable to sand down (for example: animal paw prints, holes in the siding caused by insects or animals). If you see any gaps between the corners of the trim or fascia, fill the spaces with a paintable acrylic-latex caulk before priming over them.

You’ll be able to attach the bucket to a rung on the ladder and have a little additional room below you to catch any drips this way.

Because cans are heavy and painful to lift.

It is possible that during painting, paint will accumulate on your brush, causing paint to drip off the siding. Tip: Always bring the bucket down with you while climbing down the ladder. It is not recommended to attempt to move the ladder while the bucket is still dangling up there.

3. Painting

Painting is similar to priming, only that you’re painting over the entire surface, rather than just the visible areas. If you want to be more precise, you may cut in along the line of the trim, just like you would in a room, to indicate you where to stop splashing paint and where to start being more cautious. You may easily mistakenly paint a piece of white trim a different color if you are not careful. What is the average time it takes to paint a house? It varies depending on the size of the house, the amount of assistance you have, and how much of it you’re painting.

2,500 square foot house painted by a two to three person professional painting crew in one or two days at an average cost of $4,000 (for a team of two to three people).

You may not be able to do the task on your own in a weekend, but with assistance, it is doable.

How long does it take to paint house interior

The amount of time required to paint a house will be governed by a variety of different variables. When predicting the time required to complete a project, the size of the home, the availability of manpower, the intricacy of the job, and the level of organization are all key factors to consider. A group of three painters could do a simple repainting of the ceiling and walls in a three-bedroom house of up to 1,900 square feet with little preliminary work in around four days. Painting windows, doors, and moldings will take up a couple of days of our time.

  • With appropriate manpower, every conventional house may be refurbished with a fresh coat of paint in 2 – 3 working days.
  • Construction of a new structure or refurbishment of an existing structure Painting the ceiling and walls of a new house or home addition often takes less time than repainting older ones, which almost always have some damage and must be repaired before painting can begin.
  • This is not the case when repainting.
  • The application of one coat of white paint on the ceiling and two coats of colorful paint on the walls will frequently be considered standard practice.
  • Dark colors, particularly red, must frequently be painted three or even four times on the same wall, depending on the situation.
  • Spray painting trims, doors, and moldings is very frequently only acceptable quality in bespoke high end homes, despite the fact that it may be the greatest choice in any case for the walls.
  • DIY or hire a professional painter to complete the project.
  • Painting the ceiling and walls of a conventional 12′ x 12′ room may be completed in 5 – 6 hours by the homeowner, providing the walls are in excellent condition.
  • Baseboards, doors, and windows may require an additional 2 – 3 hours of labor to complete.

A competent painter will be able to complete the walls and ceilings of two rooms in one work day, or around 8 hours. Hiring a professional painter will save you time, and it may be a smart choice if you want to achieve better standards and greater quality in your painting jobs.

The Secrets of Pro Painters

Kevin O’Connor sits down with master painter Mauro Henrique to talk about painting techniques in this video clip. Kevin is shown how to wield a paintbrush by Mauro, who is a professional painter himself. Mauro then fills the brush with paint and demonstrates to Kevin how to paint a piece of baseboard in the appropriate manner. After purposefully dabbing paint across the wall, Mauro demonstrates how to clean it up before demonstrating the advantages of using painter’s tape on the wall.

See also:  What Is The Difference Between Interior And Exterior Routing Protocols

How to Hold a Paint Brush

To paint like a professional, you must first learn how to handle your brush properly. Placing the brush’s handle flat against the back of your thumb while holding the ferrule (the metal component that binds the bristles together) between your index and middle fingers is a good technique for cleaning a brush. To use a slanted brush correctly, the tip should be on the finger side rather than the thumb side.

How Long Does It Take To Paint a Room?

A typical-sized room takes painters two to four days to paint, depending on the size of the space. That is the amount of time it takes to properly prep, prime, and paint a surface. It takes more effort, but when you step back and look at the end effect, you’ll agree that it was time well spent.

21 Tips for Painting Like a Pro

If an accidental brushstroke should happen to land on the wall, don’t be concerned; wet paint is quite easy to remove. If you have a moist towel handy, you may use it to wipe the wet paint off the wall by stretching the fabric over your index finger. Just make sure to tuck the extra cloth into your hand to keep it from coming into contact with the wet baseboard.

2. Even Pros Use Painter’s Tape—Sometimes

Even professional painters have to resort to the usage of painter’s tape from time to time. In order to preserve completed surfaces such as flooring and furniture when painting against them, they will frequently spread masking tape across the surface. When it comes to painting walls and trim, however, they generally eschew the use of masking tape in favor of their expertise and steady hands. The majority of us are capable of painting a space to a satisfactory standard. A seasoned professional, on the other hand, performs an excellent job.

3. Remove Everything From the Room

To begin, clear the space by removing anything from the room. We spoke with many painters, and each shared a horror story of a time when he didn’t adhere to Rule No. 1. Furniture that is bigger in size can sometimes be left covered in the center of larger rooms, but if you are restoring plaster walls, says Chris Span of Span’s Quality Painting in Mobile, Alabama, you should move the furniture out of the way “Remove everything from the room. The dust from drywall gets everywhere.” Removing doors, light fixtures, and hardware, as well as marking everything with masking tape, will save time.

In Waterbury, Connecticut, painter Rich Maceyunas says it’s astounding how well a few drips of paint can cover a floor.

One thing to keep in mind is that paint will soak straight through lightweight materials like bedsheets. Plastic sheeting is effective, although it is extremely slippery and does not absorb spills.

4. Find, Then Fix, Cracks and Dents

Any little cracks, bumps, or nail pops will be visible under the light of an old lamp with a bare bulb held near to the wall. Carmen Toto, proprietor of C. TotoSons in Madison, New Jersey, fills tiny cracks and dents using painter’s putty or a lightweight spackle; he uses plaster of Paris for dents that are more than 1/8 inch deep and larger in diameter. When it comes to bridging over reoccurring stress cracks, Maceyunas employs a rubberized spray-on primer called Good-Bye Crack, rather than the traditional tape and filler procedure that most people are familiar with.

According to Toto, “don’t put spackle on wood because it just will not adhere.” Painter’s putty or a two-part wood filler, such as Minwax’s High Performance Filler, are used to repair damaged trim.

Some of our professionals sand all previously painted walls, regardless of their shape, in order to achieve smoother surfaces and better adherence.

5. Do the Sanding Two-Step

Using sandpaper not only helps to feather out cracked paint, but it also gives the following layer of paint more “tooth.” Instead of sandpaper, a sanding sponge can be used to achieve a glossy finish on trim. Sponges conform to the contours of the trim and last far longer than paper. Painter Brian Doherty of Richmond, Virginia, follows up with liquid sandpaper after hand-sanding to ensure that the surface is totally deglossed and free of gloss to avoid incompatibility issues when painting latex over alkyd paint or when he is unsure of the original finish.

6. Sponge-Bath Walls

Paint over dust is not recommended unless you want textured walls. TSP (trisodium phosphate) or a mild cleanser, such as Jasco’s TSP No-Rinse Substitute, should be used to clean the walls. The treatment Toto employs for smoke-stained walls is a 50/50 combination of bleach and water. Two buckets are needed to thoroughly clean a wall. Fill your rag or sponge with cleaning solution from your cleaning-solution bucket, then scrub. Before redipping the sponge, rinse it well in a second bucket filled with clean water before continuing.

7. Caulk All Cracks

Filling gaps with a paintable acrylic-latex caulk reduces drafts and restores the appearance of your trim to like new condition. The key to successfully applying caulk is to cut the tip slightly smaller than you believe it should be; too much caulk results in a sloppy mess. Also, instead of using a nail to break the inner seal, use a thin wire to prevent the nozzle from being stretched out. A dripless caulk gun, which automatically reduces the pressure with each pull of the trigger to minimize undesired leaking, is another an option to think about.

8. Pick a Powerful Primer

Primers aren’t merely diluted paint, as some people believe. In order to build a strong, even foundation, cover stains and guarantee that the topcoats of paint go on easily and adhere securely to the surface, they are prepared with special additives. John Weeks, proprietor of John the Painter in Mobile, Alabama, says, “Most people use latex primers, but the experts stick to alcohol and alkyd primers since they’ll cover practically anything.” The look of the topcoat might be affected by the primer.

According to Span, it is acceptable to spot-prime the ceilings, but not the walls, because primed spots will show through.

9. Buy Quality Paint

It is not merely diluted paint that is used as a primer. They’re designed to provide a firm, even foundation, seal stains, and guarantee that the topcoats of paint apply easily and adhere securely to the surface they’re applied to. John Weeks, proprietor of John the Painter in Mobile, Alabama, says, “Most homeowners use latex primers, but the experts use alcohol and alkyd primers because they can cover practically anything.” Topcoat look might be affected by the primer used. Spot priming is OK on ceilings, but not on walls since primed patches would show through, according to Span.

10. Supercharge Paint

The paint component Floetrol is used for latex paints, while Penetrol is used for alkyds, according to Dixon. “Modern paints dry too rapidly and are difficult to brush out,” he says. In his opinion, a few ounces per gallon of paint will help to reduce the drying process and make the paint more workable. Another issue is that of bridging. Dixon explains that “Latex paints build a skin.” “Removing painted tape can cause the skin to break, resulting in a ragged rather than a precise line when the tape is removed.” Last but not least, recording takes time.

Although mildewcide additives are available, our professionals recommend utilizing bathroom and kitchen paints that include mildew fighters built in.

Because remaining mold spores can survive beneath the paint and ultimately push their way through to the surface, you should carefully prepare the surfaces in the bathroom and kitchen as well.

11. Roller Rules

The ideal roller would be large enough to carry an entire room’s worth of paint, leave just the correct amount of texture, not spray or fuzz, and be simple to clean. Until someone comes out with the perfect roller, you may use these guidelines to help you pick the correct one. In addition to adding additional paint to the roller’s grip, Dixon explains that a longer nap will generate more texture on the roller’s surface. In the words of Dixon, “a 1/2-inch nap lamb’s-wool roller retains plenty of paint without imparting too much texture.” “Even less costly rollers can be effective,” Span asserts.

Despite these drawbacks, Maceyunas is adamant about the broader roller’s performance. “Instead of many hundred W and M strokes, the roller can complete an entire wall in a few up and down strokes,” he explains.

12. Use a Bucket

Roller pans are preferred by professionals over 5-gallon buckets with a roller grid. They can carry more paint than pans, and, according to Doherty, “it’s more difficult to topple a bucket.” A bucket also allows you to box, or mix, two or three cans of paint to prevent color inconsistencies when painting a large surface area. When working with a bucket and grid, dip the roller about a quarter of the way into the paint and run it over the ramp to work the paint into the nap of the fabric.

13. Work with a Painter’s Rod

A painter’s rod, also known as a pole, can help you paint ceilings more rapidly since it eliminates the need to climb up and down ladders. Furthermore, there is no need to stand immediately below the area you are painting, which means you will not catch every stray spatter of paint. A pole is also useful for securing items to walls and floors. Even though the experts were divided on whether a 4-foot or an 8-foot pole was the ideal choice for regular usage, they were all in agreement that a telescoping rod was the greatest option.

14. Buy a Better Brush

A quality paintbrush is essential for achieving a professional-looking finish. Despite the fact that an excellent brush costs $15 to $25, Doherty adds that you will realize that professionals aren’t as competent as you had previously believed. “A large part of their success may be attributed to the equipment.” Natural-bristle brushes are preferred by the majority of our professionals for oil-based paints, although synthetic brushes are recommended for all-purpose use. When selecting a brush, pay close attention to the bristles on the brush.

  1. The firmer poly bristles are more suited for external or rough work, whilst the softer nylon brushes used by Doherty are better suited for fine interior work.
  2. Brushes are offered in widths ranging from one to four inches.
  3. “Use your common sense,” Maceyunas advises.
  4. Angled brushes make it easier to cut to a line and place more bristles on the job than a straight-tipped brush.

15. Load a Paint Brush the Right Way

After that, you’ll need to figure out how much paint to put on the brush. Mauro recommends dipping the paintbrush into the paint container just deep enough so that there is a two-finger breadth of paint on the end of the brush, as shown in the photo above. If you use too much paint, the ferrule will become clogged, which will alter the way the brush paints. If you use too little, the paint job will take an eternity. Once the paint is added, wipe a small amount of the surplus paint into the bucket.

They discussed how specialists paint rooms in order to help you work more effectively and get greater outcomes. Some of what you’ll read may take you by surprise. For example, their secrets will not reduce the amount of time required to paint.

16. Start Low and Work Your Way to the Edge

Painting baseboards does not need you to apply the paintbrush directly to the joint between the wall and the molding, as is the case with painting crown molding. Instead, start at the bottom of the baseboard and work your way up until the paint is flowing. Then, carefully work your way toward the seam, drawing the paint up to the joint with your finger. This helps to reduce puddling at the seam, resulting in much crisper lines on the final product. If the paint has collected in the area where you started, use the brush to level it out.

See also:  How Much Do Interior Doors Cost

17. Double-Check Work

It is necessary to back-prepare or sand away any irregularities in between each layer of paint before applying the next coat. Check the surface with a light to see whether there are any drips, roller specks, or other defects.

18. Focus on Windows

According to Doherty, the ideal time to clean windows is first thing in the morning when you’re up and alert. “However, it still takes me an hour to complete a regular window,” she says. Starting with the inner sash, raise it and lower it until their positions are nearly reversed, then repeat the process with the outer sash. The bottom half of the outer sash should be painted first, followed by the entirety of the inner sash. Once the bottom sash has dried, reposition both windows to their original positions, but leave them slightly ajar to allow for ventilation.

“Windows takes an inordinate amount of time to tape,” explains Doherty.

19. Do Doors Right

The majority of painters have no issue painting doors while they are still in place, but they recommend that you rest the door on sawhorses and work horizontally instead of vertically. If you have a paneled door, begin with the panels and work your way inside from the outside edges into the center of the doorframe. “Be careful around curves because paint tends to puddle,” Dixon cautions. Apply a little “tip off” to the panel with an almost dry brush while the paint is still wet to finish it. The grain of the wood should be followed when painting the stiles (vertical) and rails (horizontal) of the railing.

Otherwise, you’ll end up with a glob of paint.

“Make certain that the door is completely dry before painting the other side or rehanging it,” advises Maceyunas.

20. Skip Daily Cleaning

Brushes and rollers are usually not cleaned unless they are going to be used the following day on the same work, according to most professionals. As Maceyunas explains, “Latex paint dries more slowly in cold weather.” To store rollers and brushes for two-day work, he wraps them tightly in plastic shopping bags and places them in the refrigerator.

Just make sure to let the roller get down to room temperature before reusing it, he explains. When it comes to cleaning roller coverings, it is nearly difficult. The majority of professionals purchase new coverings for each task.

21. Expect Touch-Ups

Accidents do happen from time to time. A inexpensive sponge brush will come in handy when you need to integrate a repair with the rest of the wall or furniture. Simply dab the paint on the canvas to give the appearance of a roller.


In his demonstration, Mauro used a Picasso 2-112″ angle cut brush, which is made by Proform Technologies, as well as a Wooster 3″ flat brush to illustrate cutting techniques. Almost all home centers and paint supply stores have a variety of paintbrushes, including both of these models. The paint that Mauro used on the trim was Ultra Pure White by Behr, which is a product of the company.

  • Dripless caulk guns are manufactured by Dripless, Inc.
  • Floetrol and Penetrol paint additives are manufactured by Flood
  • No-Rinse TSP Substitute is manufactured by Jasco Chemical Corp.
  • Sandblaster Sanding Sponges are manufactured by 3M, Construction Markets Division
  • Kilz is manufactured by Kilz, Inc. Total Purdy Corporation manufactures one primer, a high performance wood filler, and brushes and rollers. One primer is manufactured by Masterchem Industries. Bulls Eye 1-2-3 primer:William ZinsserCo
  • Further reading:House Painting Inside and Outby Mark Dixon and Bob Heidt
  • Wooster Brush Co. The Taunton Press published a book in 1997 for $19.95.

Special Thanks to the Following Painters

  • Dixon’s Painting is the work of Mark Dixon. Brian Doherty of Doherty Painting in Missoula, Montana Rich Maceyunas of Maceyunas Painting and Wallpapering in Richmond, Virginia Carmen Toto, Carmen Toto and Sons, Waterbury, CT
  • Chris Span, Span’s Quality Painting, Mobile, AL
  • And Chris Span, Span’s Quality Painting New Jersey
  • John Weeks, John the PainterMobile, Alabama
  • Madison, NJ

How long does it take to paint entire interior of house (hardwood floors, how much) – remodeling, decorating, construction, energy use, kitchen, bathroom, bedroom, building, rooms

Please registerto participate in our discussions with 2 million other members – it’s free and quick! Some forums can only be seen by registered members. After youcreate your account, you’ll be able to customize options and access all our 15,000 new posts/day with fewer ads.

We are under contract on a house, aiming to close at the end of March. Before we move in, we’d like to re-paint pretty much all the rooms in the house, including 3 BR, LR, DR, kitchen, staircase, hallways, and possibly 1 bathroom. The house is about 1,400 sq feet. We wouldn’t do the painting ourselves, but would contract someone to do it (and we assume the contractor would hire more than one person to do the job).Also, does anyone have any idea how much it would cost to paint the entire interior of the house (labor and paint), assuming average to high quality paint?Thanks for your thoughts. We are trying to budget both money and time needed for this job.
Location: southwestern PA20,418 posts, read42,751,766timesReputation: 39618
Depends on how many are working and how big of a job it is (primer? one coat? two coats? trim?, etc).
Also depends on if it needs to be sanded down and mudded before painting. I just brought a old house with wallpaper in every room downstairs. It will take me awhile to take off all the wallpaper and then the glue, then I can start mudding and sanding before I even paint.
Location: Johns Creek, GA15,802 posts, read58,860,895timesReputation: 19914
My painter could do my houses in 4days- I gave him 5. He would usually have at least 4guys on the job.Generally it would be something like this;1st two days- prep and prime walls (spray)2nd day- prep trim (while d/wall guys did touchups)3rd day- paint trim (spray)4th day- Sand d/wall touchups, paint walls (rolled) and clean-up5th day- (if needed) finish paint and clean-upWe’re talking 3400-4200sq/ft two story houses- some even had finished basements (that was 5days for sure).
Location: Grosse Ile Michigan29,752 posts, read72,538,324timesReputation: 37206
What size house?Cielings too or just walls?Any stairs or floors?Molding?How good a job do you want?What type of primer and paint?Is there flooring and furniture in place?Are you willing to accept sprayed paint rather than rolled, brushed?Do you want it to look good for a long time, or just long enough to sell (these days that could mean a few years).Are you using one color everywhere?Different color in different rooms?Different colors in each room?You can end up needing four or five different colors in a single rooom, that can really add a lot of time. (wall color, cieling color, trim color, highlight color – FOr eample in our frotn parlor the walls are one color, but the fireplace chiminey box is another color.The cieling is a thrid color and the window and door casements, crown molding, picture rail and shoe molding are a fourth color. If we ever get around to it, we will have a word stencil above the fireplace and rose stencils with plaster roses on the walls.This will make two more colors for a total of six (seven if you count the color that we paint the roses).What colors?Bright bold colors are harder to paint, take multiple coats and tend to run a lot.Red is the worst that I have ever tried to use.Bright Yellow and dark blue also gave me problems.How many hours can the painters work each day?How far away is the nearest painting supply store?DO you have pets?
Location: southwestern PA20,418 posts, read42,751,766timesReputation: 39618
Thanks. This is really helpful. Anyone has any idea roughly how much this would cost? I know it depends on a lot of factors, but I’m looking for a ballpark number. Again, the house is about 1,400 sq feet. Thanks!
Location: Cary, NC793 posts, read4,274,354timesReputation: 1343
Quote:Originally Posted bymd565Thanks. This is really helpful. Anyone has any idea roughly how much this would cost? I know it depends on a lot of factors, but I’m looking for a ballpark number. Again, the house is about 1,400 sq feet. Thanks!I don’t think you’re listening.The answer is:it depends.Talk to an actual painting contractor in your area to find out what it would cost.They give free estimates and I’m sure you can find a dozen different contractors that all want your business.Nobody on this forum is going to be doing the work so why would you want an estimate from here?
Location: Silver Springs, FL23,417 posts, read34,726,498timesReputation: 15560
Quote:Originally Posted bymd565Thanks. This is really helpful. Anyone has any idea roughly how much this would cost? I know it depends on a lot of factors, but I’m looking for a ballpark number. Again, the house is about 1,400 sq feet. Thanks!These days, everyone does free estimates.That is what I would recommend, prices can vary greatly, due to location, etc.There are too many variables, you know?I could toss out a, but that might not be the going price in your part of the country.
Coldjensen, great list of questions! Let’s see:What size house?1,400 sq feetCielings too or just walls?just walls, I thinkAny stairs or floors?NoMolding?NoHow good a job do you want?Decent job. We don’t want it to look cheap, but don’t want to spend top $What type of primer and paint?Not sure. We started looking at different brand and like Martha Stewart and Behr.Is there flooring and furniture in place?It will be empty. We will refinish the hardwood floors in the living room prior to painting.Are you willing to accept sprayed paint rather than rolled, brushed?Don’t think so.Do you want it to look good for a long time, or just long enough to sell (these days that could mean a few years).We want it to look good for a while-we’re the buyers.Are you using one color everywhere? Different color in different rooms? Different colors in each room?Different colors for different rooms.What colors?Very neutral colors (cream, beige, off white).How many hours can the painters work each day?We haven’t contracted anyone yet. The house will be empty, so however many hours needed. I assume 9-5pm.How far away is the nearest painting supply store? Within 10 milesDO you have pets?No.Thanks!
Pleaseregisterto post and access all features of our very popular forum. It is free and quick. Over $68,000 in prizes has already been given out to active posters on our forum. Additional giveaways are planned. Detailed information about all U.S. cities, counties, and zip codes on our

All times are GMT -6.

A Word to the Wise About DIY Interior Painting (and When It’s Time to Call a Professional)

When Pantone announced their 2017 Color of the Year (spoiler alert: it’s greenery! ), I was waiting with bated breath to see what they would come up with. visited your home and were immediately motivated to change your wall colors so that you could incorporate the wonderful, springtime tone of green. Going to your local hardware or paint store and getting started on the painting project is really tempting, but it is not recommended. You only need a few paint buckets, brushes, tarps, and tape, and you’re good to go, don’t you think?

It’s one of the most underappreciated home improvement tasks that you may embark on.

Before You Begin

Matthew Marchesi, a seasoned painter with 19 years of experience, a project manager at Nightingale Co., and the previous owner of Marchesi Painting, offers some advice on how to tackle a painting project successfully. adds Marchesi, “I have spoken to a number of people who really dislike painting, and I always ask them why they feel this way.” Patient is the number one reason, says the author. Beginning with the preparation phase and continuing all the way through to cleanup, patience is required at all times.

According to Marchesi, it takes homeowners twice as long to paint as it would take a professional to do the task.

Despite the fact that you may be tempted to do this task in order to save money (rather than hiring a professional), keep in mind that time is money in this case.

The paint market, according to Marchesi, is one in which “you get what you pay for.” When it comes to painting your own walls, the following suggestions will help you get the job done correctly and efficiently.

Prep Time

In seeking assistance on the process of “prepping,” you’ll find that different expert painters have varying interpretations of what the term “prepping” means.

However, there are a few features that are universal throughout the sector. Prepping is the process of preparing the interior of your home for a fresh coat of paint, and it includes anything from moving and covering your furniture to caulking the cracks in your ceiling.

Step 1: Moving Furniture

Move (or remove, if feasible) all of your furniture and other belongings from the room you’ll be painting before you begin applying paint to it. This includes any wall hangings, such as picture frames, mirrors, and other such items on the wall. It may be more convenient to gather the furniture in the center of the room, away from the walls, rather than moving it completely out of the room. After that, just wrap your furniture in plastic and secure it with tape to prevent the paint from spilling onto it while it is being painted or stained.

One thing to keep in mind is that most professional painters offer furniture relocation as part of their services.

Step 2: Protective Wear

Take the time to protect yourself in the same way that you took precautions to safeguard your furniture. Mr. Dmitri Kara, proprietor of Fantastic Handyman Fantastic Handyman, a professional painting and decorating firm based in London, recommended using goggles to provide sufficient eye safety when painting. Additionally, dress in clothes that you don’t mind getting paint on in case you get paint on your clothes. You should use a facemask when sanding to avoid breathing dust and debris that might harm your lungs and cause respiratory problems.

Step 3: Clean and Repair the Walls

Kara also recommended that you clean your walls well before applying a layer of paint. Before you begin painting, take the time to wipe and clean your walls. Three tablespoons of laundry detergent per gallon of water is a good ratio for cleaning bathrooms and kitchens (which tend to accumulate grime over time). Use an old cloth or rag to apply the paint on the walls.

Step 4: Search for and Fix Flaws

Marchesi recommends that you take the time to inspect your walls for problems such as nail holes, dents, and cracks before painting. This stage may take longer than you anticipate depending on the size of the space. Some pros, like as Marchesi, utilize a halogen light that they move up and down the walls in order to capture even the smallest imperfections. According to Marchesi, “it’s something that homeowners might not consider.” There’s a lot more to it than just not wanting to take the effort to patch up a nail hole from a picture, and that’s understandable.

For small faults such as plastering bumps, a standard paint scraper and sandpaper or an electric sander are often employed to correct them.

Most professional painting businesses provide this service in the same way that they do furniture relocation. It is important to spend the necessary time repairing any flaws in your wall in order to guarantee that your paint work has the quality and longevity that you desire.

Step 5: Taping and Tarps

It was inevitable: the dreaded painter’s tape would appear. This stage will very certainly consume the majority of your preparation time. The expert advises that you tape everything out if you want perfectly straight lines on your ceiling, walls, and trim. While it takes a little time, the end product is far superior. Before you begin painting, make sure to tape off any exposed lighting sconces, window frames, or lighting fixtures. Painter’s tape or tin foil can be used to do this. Tin foil is particularly useful for covering difficult-to-cover elements in your home, such as lighting sconces and door knobs.

Because you never know where paint can end up, it’s a good idea to put down a tarp to protect your carpet and floors.

Tools for the Task

It’s time to talk about the tools of the trade that the experts themselves choose to use in their daily work. Tools are available in a variety of pricing ranges, ranging from high-end to economical, but the most important principle to remember is that you get what you pay for. As a starting point, these are some of the most fundamental materials you’ll want for prepping:

  • 6 to 8-inch patch blades
  • Patch or caulk
  • Sandpaper or an electric sander
  • Protective eyewear
  • Face mask

After you’ve repaired any holes or defects in your ceiling, walls, and trim, you’ll need the following supplies before you can begin painting:

  • Can openers, paint cans, stirrers, roller coverings, brushes (in a variety of sizes), trays, rags or old towels, and so on. a pole for extending
  • Tape for painting
  • A paint spout

Marchesi loves to use paint brushes from the Wooster brand. According to him, “Wooster has a variety of various sorts of brushes that are appropriate for trim.” I prefer to use a soft brush for trim since the softer the bristle, the smoother the paint flow on the trim will be. “I would use an extra strong brush to clean the walls and ceiling.” Wooster brushes are more expensive than other brands because they are of higher quality. If you’re seeking to save money, Home Depot has a brand named Purdy that you might want to consider.

There are also brushes that may be thrown away after a single usage are available.

Professionals’ Preferred Paint Brands

How do you determine which paint brand is suitable for you when there are hundreds of different options available on the market? The cost and quality of products varies, so it’s important to shop around. Benjamin Moore is the brand of paint that Marchesi prefers. “They are a better organization with a greater level of quality,” Marchesi explained. When it comes to the painting business, you get what you pay for. If you’re looking for something inexpensive that will last a couple of years, you’ll want to stick with the lower price range.

Of course, there are more economical brands on the market, such as Behr, which is one of the most popular brands for do-it-yourself interior and exterior painting tasks.

Behr is also available in a variety of colors. It is possible to purchase Behr paint at your local hardware or paint supply store. While Sherwin-Williams is a bit on the expensive side, it may be a good alternative for you as well.

How Much Paint You’ll Need

Next, determine how much paint you’ll need for your project by measuring the area that will be painted. Marchesi recommends that you measure the square footage of the space you intend to paint before you start painting. A gallon of paint is normally enough to cover 450 square feet of surface space. When it comes to picking a good color for your room, Kara recommends that you try the colors on the walls first before painting the complete wall in that hue. “It’s important not to rely on first impressions and to make judgments based on color swatches in-store,” Kara recommended.

Make certain that you take into account all of the interior lighting options.

“Swatches will never accurately represent the final color of the finished paint job.”

To Prime or Not to Prime?

The majority of individuals like to prime the entire space, according to Marchesi. “I never believed it was essential, especially with the paint that is available now that contains priming already. However, if you’re intending to paint over a darker current paint color with a lighter paint color, the deeper color will show through even after two coats. “This is the time when you want to prime.” Also, according to Kara, make certain that you use the proper primer. Drywall is normally primed with a water-based primer; however, stain-covered walls or panel installations are typically primed with an oil-based primer.

A professional tint for your primer may be obtained at any paint or hardware supply store.

Painting Order

According to Marchesi, you should begin at the highest part of the space, which is your ceiling, and work your way down to the trim and then the walls. When it comes to painting, the instructions on the can normally recommend waiting four to six hours between coats of paint. In order to expedite the process, Marchesi proposes “forced drying,” which involves blowing air across the painted walls in order to dry them more quickly. In certain cases, depending on the quantity of “forced air” that is blowing on the wall, you may conceivably finish a second coat in less than two hours.

A Word About Trim

Base molding, window molding, and crown molding are all types of trim that may be found in a variety of materials such as wood, plastic, and stone. If certain elements are existing and have been painted previously, it is possible that the paint may need to be reapplied. In order to paint the trim, Marchesi detailed his procedure as follows: “I take the time to look at every crack and caulk it,” he said.

In the event that there’s any form of hole or nick, I will fix it up and sand it down. To avoid the dust from dropping all over the place, I employ a wet sanding approach, which is very popular among homeowners. Then two coats of paint are applied on top of it for the greatest appearance.”

Technique (Tips and Tricks)

Using the “W” or “V” technique to roll paint on a wall is something you may have heard of. The following is how Kara breaks down the process: “Begin at the corner of the wall and roll on a three-inch by three-inch ‘W,’ starting from there. Then, without raising the roller, fill it in as much as you can. Continue until you have filled in the complete letter ‘W.’ This method is utilized to conceal seams and locations where the roller contact has been lost or has been re-positioned.” While working, Ray Wheeler of The Paint Manager advised utilizing the rubber band method to keep your hands from slipping: According to him, “wrap a rubber band around the paint can so that you have something to use to carefully scrape extra paint off your brush.” “Be careful not to scrape it up against the can’s entrance since the paint will leak through the seal and make it difficult to close.” In addition, the rubber band will simply drop the leftover paint back into the container, reducing your paint waste.”

The Clean-Up Process

When it comes to cleaning up after painting, there are a number of important factors to consider. First and foremost, never clean oil paints in a sink. It is necessary to use thinner to clean your equipment and brushes. In order to do so, you will need to clean your equipment in a separate container, such as a disposable tub or plastic bucket, that is filled with any cleaning chemicals, such as soap and water or laundry detergent. It is not possible to dispose of the thinner at the curb. Investigate how your municipality handles paint thinner disposal, as well as where you may drop off your bucket of thinner to be disposed of correctly by a qualified practitioner.

Cat litter and sand are two drying agents that may be used to soak up any residual paint.

In contrast, if you choose to preserve your spare materials and paint, Ray Wheeler recommends cleaning the brushes in a softener mixture.

This will produce an overnight soak that will loosen dried-on paint and allow it to be cleaned off the following day, adds Wheeler.

Here are some ideas for what you can do with your leftover paint.

Please share your thoughts in the comments section below!

Leave a Reply

Your email address will not be published.