What Size Are Interior Doors

Standard Door Size 101: Important Measurements All Homeowners Should Know

Image courtesy of istockphoto.com

Q: We just purchased a home that was built in the 1960s and will be remodeling to bring it up to date. Our plans include adding some new doors, and we’re wondering what sizes will work best. Are there any standard door guidelines?

A:Congratulations on your recent acquisition of a residence! Because many older homes were built before local building rules were established and because doors were typically fashioned by hand, not all older homes have doors of the same size as one another. Doors are now available in regular sizes, and they can be found at DIY stores and home improvement centers around the country. Additionally, many retailers sell a variety of different door sizes that may be utilized in specific regions of the house in addition to the usual ones.

There are standard door sizes and some alternates available.

Interior doors are available in a variety of standard heights, widths, and thicknesses, which are as follows:

  • Interior doors are typically 80 inches in height, according to industry standards. For doors leading from one room to another, this is the most typical height for corridor doors. Due to the fact that an 80-inch door is 6′ 8″ tall (pronounced “six-eight”), it is referred to as a 6/8 door (pronounced “six-eight”). A slightly shorter 78-inch door is also available for immediate delivery. It is referred to as a 6/6 door, and it is designated for closet and utility doors. The standard door width for interiors is 32 inches in height and breadth. For a passage door, this is the minimum width that must be met. You might also be able to locate some thinner doors in stock, such as 30 inches, 28 inches, and 24 inches in width. If you need a closet or utility door, these smaller widths are permitted by code
  • You may be able to obtain 36-inch-wide doors on hand. Wider choices that comply with the Americans with Disabilities Act (ADA) are a popular choice for homes with people who have mobility challenges. The inner thickness is 13.8 inches on average. Generally speaking, this is the most popular interior door thickness, and it is often the only one available at home improvement stores. Some businesses may have doors in stock that are 112 inches thick and 134 inches thick alternately. The walls of these are significantly thicker than the norm, and they are frequently insulated or constructed of hardwood. Interior door jamb thickness on pre-hung doors is 4-9/16 inches as a general rule of thumb. The door jamb is the frame that attaches to the wall and provides support for the door through the use of hinges. When installed in a normal two-by-four wall (which is really made up of studs that are 112 inches by 312 inches in size), this thickness is intended to provide enough insulation. The thickness of an alternative jamb is 6-9/16 inches. It is intended to be used with two-by-six walls (which are really formed from studs that measure 11 1/2 inches by 5 12 inches)

Some tasks are best left to the professionals. Locate licensed contractors in your region and receive free, no-obligation estimates for your job by filling out the form on this page. + Image courtesy of istockphoto.com

Measuring for a new door is a simple process.

The majority of the time, when purchasing a door, you’ll want one that is pre-hung, which means it comes with the frame (jamb) already attached. The other form of door, known as a “slab door,” is distinguished by the fact that it has simply the door and no frame.

Measuring for a Pre-Hung Door

  1. To find out where the sides of the door will fit when it is closed, open the door and take a measurement from the inside of one jamb tothe inside of the other jamb (see illustration). Make a note of the number
  2. While the door is still open, take a measurement from the top of the jamb on the inside (where the door would fit when closed) to the bottom of the door. Make a subtraction of 34 inch and put the result down. Flooring allowance is represented by a 34 inch deduction. Take a measurement of the thickness of the door itself and put the result down on paper. When you go to the home improvement center, make sure to have all three numbers with you.

Measuring for a Slab Door

  1. To determine the width, height, and thickness of a slab door to replace, do not measure the jamb—measure the door itself.

Image courtesy of istockphoto.com

Choose a pre-hung door with slightly smaller measurements.

A skilled carpenter (you’ll need at least basic carpentry abilities to hang a door) may then use this method to fit the new door frame into the rough opening that was previously used to hold the old door. It’s not uncommon to have to use a few shims to get a snug fit. It is best to avoid purchasing a pre-hung door that is slightly larger in size than your old door if you are doing the work yourself. It would be necessary to remove a section of the rough-in frame (in the wall) in order to fit the door jamb, and because this would modify the load-bearing structure of the wall, it would be best left to a professional.

Or, select a slab door with slightly larger measurements.

If you’re simply changing the door and not the jamb, you’ll wind up with gaps between the door and the jamb if you get a smaller door. Instead, purchase a slab door that is somewhat bigger in size than the current door and then shave it down to the precise size of the old door. Fitting a slab door as a do-it-yourself job will take time since it needs accuracy to form the indentions needed to fit the hinges and install a new strike plate that is properly matched to the old door. While installing a slab door may appear to be less complex than installing a pre-hung door, it is really more complicated.

If you want more wall space, consider a narrower door.

Large doors may be overwhelming in tiny spaces, so if you have a limited amount of available space, a smaller door can create a cleaner aesthetic while also adding wall space. Removal of the existing door and jamb, as well as reconfiguration of the rough-in frame in the wall, is required in order for a new pre-hung door to suit the available space. This project is well within the capability of a do-it-yourselfer with a rudimentary understanding of carpentry.

Consider remodeling with wider doors if your home’s doors are too narrow.

When upgrading an older property, it may be necessary to enlarge entrances since it can be difficult (if not impossible) to carry heavy furniture through them in the first place. There are a few 36-inch doors available in stock, but your best chance is to purchase bespoke doors from a home center or building supply store.

Because the rough-in aperture in the wall will have to be increased in size, it is recommended that a professional install these doors for you. RELATED: Weekend Projects: 5 DIY Door Designs to Get You Started

You can also order a custom size pre-hung door.

If your measurements don’t quite match the normal size for doors available at the shop, but you aren’t willing to extend or narrow the existing door frame, know that manufacturers will custom-make pre-hung doors to your exact requirements at no additional cost. This option ensures that your door will fit exactly in its jamb and will open and close with ease when you do so. Using this method, you may remove the old door casing and trim, install the new door, and then replace the original casing and trim, painting or staining the new door to match the old.

Entry doors are usually 36 inches wide.

However, while a door width of 36 inches is considered excessive for an interior door, it is considered conventional for front doors. The standard height, which is 80 inches, stays the same, however, as before. Additionally, the majority of entry doors are slightly thicker than interior doors, with a normal thickness of 134 inches. These somewhat wider doorways make it easy to bring in huge appliances and furniture pieces into the house without difficulty. For two-by-four and two-by-six wall framing, standard jamb thicknesses are identical to interior door jamb thicknesses, measuring 4-9/16 inches or 6-9/16 inches, respectively, to fit the walls.

+ Find qualified, licensed contractors in your area and receive free, no-obligation estimates for your job.

What is the Standard Door Size for Residential Homes?

When purchasing a door, there are a number of aspects to consider. Which kind of door do you prefer? Do you want a slab door or do you want a pre-hung door? Is it better to have an out swing or an in swing? Once you have obtained this information, you will need to begin measuring your results. If you don’t know what you’re doing, measuring a door and its frame may be a frustrating experience. Here are some useful measurement methods to follow, as well as some fundamental facts about typical door sizes.

Standard Size for Exterior Doors

Generally speaking, the conventional size for an outside door is 80 inches by 36 inches, which is 6 feet, 8 inches by 3 feet in length. Modern homes are increasingly being built to the length of 96 inches (8 feet), with standard-width stock exterior doors available in 30 and 32-inch widths. Some door manufacturers provide doors in heights ranging from 7ft to 8ft and widths ranging from 24 inches to 42 inches. The height of fiberglass or steel doors is fixed at 6 ft. 8 inches or 8 ft. tall, respectively, depending on the material.

  • 80″ is the most popular size.
  • 109″ or higher is also prevalent.
  • The majority of the time on double door systems 32″ is commonly used in double door systems.
  • 42″ is a standard size for newer modern homes.

Standard Size for French Doors

Generally speaking, the conventional size for an outside door is 80 inches by 36 inches, which is 6 feet, 8 inches by 3 feet in length. Modern homes are increasingly being built to the length of 96 inches (8 feet), with standard-width stock exterior doors available in 30 and 32-inch widths.

Some door manufacturers provide doors in heights ranging from 7ft to 8ft and widths ranging from 24 inches to 42 inches. The height of fiberglass or steel doors is fixed at 6 ft. 8 inches or 8 ft. tall, respectively, depending on the material. The thickness of a conventional door is 1 3/4 inch.

Standard Size for Sliding Glass Doors

A great deal of natural light enters the house through these types of patio doors. They are the most widely used and least priced form of patio door available today. This sort of patio door glides in a parallel motion, which makes it convenient for residents to enter and exit the house quickly and easily. The greatest spot to put sliding doors would be on a patio or deck, depending on your preferences. A sliding glass door is typically 6’8″ high and 6′ wide, which is the industry standard. Aside from the standard sizes of 5’0″ by 8’0″, 6’0″ by 8, and 8’0″ by 8’0″, other common sizes are 5’0″ x 8’0″, 6’0″ x 8’0″, and 8’0″ x 8’0″.

Standard Size for Interior Doors

All passage doors must have a minimum height of 80 inches, and the usual widths for internal doors are 24″, 28″, 30″, 32″, and 36 inches in width. The minimum suggested door width to allow for the passage of people with impairments is 36 inches. The standard thickness for an internal door is 1 3/8 inches; however, if your door is wider than 36 inches or taller than 90 inches, the suggested thickness for that door is 1 3/4 inches. The chart below contains a list of widths and heights, as well as a description of what those sizes are often used for.

1′-3″ 1′-6″ 2′-0″ 2′-4″ 2′-6″ 2′-8″ 3′-0″
6/8 Used for bi-fold doors Used for bi-fold doors Used for bi-fold doors Used for bathroom doors Used for bathroom doors Used for bedrooms Used for bedrooms
7/0 Used for bi-fold doors Used for bi-fold doors Used for bi-fold doors Used for bathroom doors Used for bathroom doors Used for bedrooms Used for bedrooms
8/0 Used for bi-fold doors Used for bi-fold doors Used for bi-fold doors Used for bathroom doors Used for bathroom doors Used for bedrooms Used for bedrooms

Standard Size forCloset and Utility Doors

Generally speaking, utility and closet doors have narrower passageways than conventional doors. Doors in homes built prior to 1990 might be as small as 18 inches in some instances. Newer models are typically 30 inches wide and 96 inches tall, with a standard width of 30 inches.

How to Measure your Door Properly

If you want to replace a door that you already have, take measurements from top to bottom of the present door. Continue by taking measurements from the left to the right side of the door. In addition, you should take note of the thickness of the door. The majority of doors have a thickness of 1 3 4 inches. It’s important that your door doesn’t deviate much from that measurement. The width of the door jamb as well as the height and breadth of the frame are equally vital to take into consideration.

The next step is to increase the width and height of the door by 2 inches, respectively, to allow for a proper entryway opening.

Whether or whether you are utilizing a pre-hung door, you will need to take a rough-in measurement.

What Are Standard Interior Door Sizes?

Whether you’re building a new house or investing in a renovation project, there are several considerations to make before purchasing any building supplies or materials. Furthermore, selecting the right door form, color, and design can be a difficult undertaking, especially if you have a specific style in mind. Even with all of the factors to consider when purchasing a new residential door, there is one more element to consider that you may not have considered: the conventional interior door sizes.

See also:  How To Measure An Interior Door For Replacement

The space where the door will be put must first be measured once you have decided on the color and form that you want to use.

As a result, we’ve put together this list to show you some of the most common interior door sizes that you’re likely to encounter while working on your project.

How to Properly Measure Your Interior Door

Before we get started, let’s go through how to properly measure your standard interior door dimensions. Typically, an inside door may be found in a bedroom or bathroom. You may be able to install an inside door between rooms or at the top of a stairway in some situations. When measuring an interior door, there are several common principles that will always be followed:

  • Standard inside doors must always be at least 80 inches tall, if not more. Based on the size of the doorway and the materials you want to use, a standard width can range from 24″ to 36″ in width. It is recommended that the minimum width of a doorway be 36 inches when creating an accessible entryway.

When it comes to the thickness of the door, it might vary depending on the material you use to construct it. While the majority of interior doors are 1 3/8 inch thick, there are those that can be thicker if the door’s height and breadth are very large.

Additional Considerations Before Starting Your Measurements

Whenever you’re replacing a door in an existing doorway, you’ll want to take extra steps to ensure that all of the door’s components are accurately measured. A decent rule of thumb is to start from the top and work your way down, being sure to measure everything along the path. This comprises the height, breadth, thickness, door jamb width, and the size of the frame you intend to replace, among other things. When acquiring a new door from a vendor or manufacturer, you will almost certainly be required to give the measurements in advance of the purchase.

This is important since you do not want the merchant to deliver you the incorrect size!

Standard Interior Door Sizes

The majority of internal door sizes may be matched to the sizes of external doors (the front door of your house, for example). Having said that, the majority of interior doors are sized in accordance with the standard interior door sizes listed above. If your door is wider than 36 inches in width and taller than 90 inches, it is considered to be larger than the standard. In that case, a thicker door (approximately 1 34 inch thick) is also recommended. When you invest in a remodeling project, you typically have a certain amount of latitude when it comes to adjusting the door heights in the various rooms of your house to your liking.

  1. The width of your doorway is a measurement of the horizontal space available.
  2. The most serious standard that should be followed is the height requirement.
  3. Because standard interior doors are commonly referred to as 6/8 doors, they measure 6 feet and 5 inches in length and height respectively.
  4. When installing new hinges and doorknobs, it is especially important to consider the thickness of the material.

Interior Double Door Sizes

An exquisite addition to your master bedroom, dining room, or living space may be achieved by installing inside double doors on the inside. Furthermore, double doors are always identical in terms of width, height, thickness, and design when they are installed side by side. Due to the fact that everything must be measured twice when measuring a double door, you must exercise particular caution when measuring one. In addition, the frame will be measured differently. For double interior doors to function properly, the frames must have two sides and a space in the centre to allow for separation of the doors.

It’s critical to understand that your measurements must be as exact as possible in order for these types of doors to be placed correctly and efficiently.

Double doors are not available in a normal width. The following are the most typical widths for internal double doors, according to the manufacturer:

Following the normal indoor height of 80″, this is consistent with the industry.

Interior Bedroom Door Sizes

Bedroom doors are a little more fascinating than other basic interior doors since they do not have a particularly set size like other standard interior doors. Making a customized bedroom door does not require adhering to any certain specifications or rules of construction. Instead of concentrating on standard measures, you should concentrate on the overall architectural direction of the home in this instance. However, if you opt to select a manufacturer that currently has doors in stock, you will be able to choose from a set of standardized sizes.

Furthermore, while 80″ is the standard height for bedroom doors, you may easily install a door that is higher or lower than that.

Interior French Door Sizes

French doors are always in high demand in traditional country-style homes. These are double doors that are completely mirror images of one another, opening in opposite directions from one another, and are frequently used as a divider between rooms or as a connection between the kitchen and the garden. In most cases, one of the doors has a handle and lock, while the other contains movable hardware elements that allow the door to open and close independently. French doors, particularly those that lead to an external space, are typically 80″ tall by 36″ wide per door, according to industry standards.

Interior French double doors are typically 1 34 inch thick, which is the industry standard.

Interior Door – Rough Opening Sizes

First and foremost, you must ensure that the rough opening for your newly-measured and custom-built internal door is the proper size before proceeding with the installation. This is the stage of the door installation procedure that most homeowners and do-it-yourself enthusiasts find frustrating. When it comes to measuring the rough opening in order to correctly prepare it for the door frame, it might be difficult if you aren’t aware of the measures that should be taken. Remembering how to structure your rough introduction is actually rather straightforward if you follow a basic rule.

You will need an extra 2″ for width and 2 12″ for height after you’ve measured the width of the real door to get the measurements you need to correctly set up your rough opening.

Size of Door Size of Rough Opening
24” x 80” 26” x 82 ½”
28” x 80” 30” x 82 ½”
30” x 80” 32” x 82 ½”
32” x 80” 34” x 82 ½”
34” x 80” 36” x 82 ½”
36” x 80” 38” x 82 ½”

You should also consider how to measure entrances that are narrower or more irregular in shape. Doors for closets and utility shelves, for example, are frequently narrower and thinner than other interior doors on the same level.

Modern utility doors are around 30 inches wide, but if you have an internal door that is more than 30 years old, it may be as thin as 18 inches in thickness. Closet doors are typically 96″ in height, which is normal.

Things To Consider Before Choosing Your Ideal Interior Door

When it comes to installing a new inside door, like with many other areas of any remodeling project, you must first determine your priorities and wishes before proceeding. In the following section, we’ll go over the most important elements to consider when choosing on the type of new inside door you want to purchase. F unctionality is the ability to do tasks. Which is more important to you: form or function? Some doors are made to look like lovely pieces of furniture in the home. Others are just functional, with nothing particularly attractive about them at all.

  • Swinging doors are becoming increasingly popular since they provide an alternative to standard doors.
  • Additionally, if you do not have much available room, a sliding door may be the finest alternative for you to consider.
  • M aterials are a type of material.
  • Homeowners spend a variety of various amounts of money on their doors, which include everything from natural oak to glass to stainless steel.
  • You’re probably also searching for something that will complement the design of your home.
  • If you want things to be really traditional or country-inspired, a gorgeous barn door made of reclaimed hardwood may be just what you need to increase the value of your property while also increasing its curb appeal.
Schaaf Window Co., Inc.

You should consider your budget before beginning any remodeling job, since it is one of the most important considerations. Preparing a budget will ensure that you know precisely how much you are willing to spend on a new entrance door. Consider visiting your local hardware shop and speaking with door makers to have a better understanding of which products are being offered at which pricing points. To ensure that you are receiving the greatest bargain possible for the money you are prepared to pay, compare local and internet sellers before making your purchase.

There are a plethora of designs to take into consideration.

Want a door that divides two rooms but don’t want to compromise any natural light in the process?

Consider installing a sliding glass door.

The same rules and methods that apply to all other inside doors are used when measuring these types of doors. Just bear in mind whether or not you’ll need to increase the width of your doors for accessibility considerations before you start doing anything.

Select Your Door and Transform Your Interior Space

Prior to beginning a renovation job, one of the first things you should consider is your budget. Budget carefully so that you know precisely how much money you have available to spend on a new door. Consider visiting your local hardware shop and speaking with door makers to have a better understanding of which products are being offered at which rates in your market place. To ensure that you are obtaining the greatest bargain possible for the money you have available, you should compare local and internet merchants.

  1. It’s possible to come up with limitless designs.
  2. Trying to decide between two rooms but don’t want to give up any natural light?
  3. Sliding glass doors are a great option.
  4. It is the same standards and processes used for measuring all other inside doors that are used for measuring these types of doors.
  • For inside doors, the usual height is 80 inches. Widest standard widths may be found between 1 5/8″ and 1 3/4″. A rough entrance should have an additional 2″ in width and a 12″ in height added to it while laying it out. You may alter these measurements to create doors that are one-of-a-kind and complement the architectural framework of your home.

It might be intimidating to select a new door for the first time, especially if it is your first time. Understanding standard measures, on the other hand, might help you get a better sense of how doors are constructed. As a result, you’ll be prepared when you visit your local or online door maker to look at their products. If there is anything more you need to know before starting your next large job, you may check over this online book of tips:Remodeling 101: A Free Homeowner’s Guide, which is available for free.

“The education of homeowners is something that we are quite enthusiastic about.

a link to the page’s load

Standard Door Width & Length: Standard Door Sizes Guide

Doors have the potential to be quite the focal point in your house. They provide much more than just a means of entering and exiting a room or residence. Right entry door may enhance your home’s curb appeal from the outside while also improving the overall appearance and attractiveness of your complete residence. First and foremost, though, you must discuss size before moving on to fashion and appearance. Understanding what size you require is the first step in obtaining the ideal doors for each and every entrance in your property.

Type Height Width Thickness Additional Common Sizes
Standard Door 80” 36” 1 ⅜” N/A
Standard Interior Door 80” 36” 1 ⅜1 ¾ (If door is bigger than 90”H X 36”W 24”, 28”, 30”, 32”, 36”
Standard Exterior Door 80” 36” 1 ¾” N/A
Sliding Glass Door Sizes 80” 60” – 72” N/A 60”H X 96”W, 72”H X 96”W, 96”H X 96”W
French Door Sizes 80” 36” 1 ¾” 84” H, 96” H, 24” – 42” W
Closet Doors 96” 30” 1 ⅜ N/A

Standard Door Width

Because there are so many different sizes and kinds of doors, the conventional door width might vary. However, in the United States, the usual common door width is 36 inches.

Other common sizes include 30 and 32 inches, both of which are fairly simple to come by. Be aware that while determining the width of a door, you are taking into consideration not just the doors themselves but also the frames around them.

Standard Interior Door Width

A definition of an interior door is any door that is located within your home. The International Residential Code establishes minimum criteria for height and weight. Most common interior doors have a width that ranges between 28 and 32 inches in width. Custom door sizes, on the other hand, might vary significantly.

Standard Interior Door Height

A definition of an interior door is any door that is located within your residence. The International Residential Code establishes minimum height and weight limits for residential construction. Most common interior doors have a width that ranges between 28 and 32 inches in height and thickness. Custom door sizes, on the other hand, might vary significantly from one another.

Standard Exterior Door Width

Exterior doors can be much bigger than interior doors, although their width is typically 36 inches, which is the same as that of interior doors. As a result of this, you may also find outside doors that are smaller in size, with a typical width of 30 or 32 inches available.

See also:  How To Smooth Out Interior Stucco Walls

Standard Exterior Door Height

The height of entry or external doors must be at least 80 inches in height. They may be made in regular sizes up to 96 inches tall, and, as previously said, bespoke doors can be made much taller.

Sliding Glass Door Sizes

When it comes to height, sliding glass doors are normally the same size as they are wide, but the width might vary depending on where in your home you are placing the door and how large the aperture is. It is common for builders to develop door frame regions that are standard sizes so that if you ever need to repair one, you will have an easier time finding a replacement part.


Sliding glass doors are often installed at a height of 80 inches above the floor. Once again, unless you’re designing a custom opening during the construction process, this is a very normal height for an opening. You should have little, if any, difficulty in locating the appropriate size.


The width of a sliding door might vary depending on its design. The majority of doors are between 60 and 72 inches in height, however there are many different variations available. Keep in mind that if you’re putting several panels in addition to the typical two-panel door, you have the option of going even wider.

French Door Sizes

In certain cases, French doors are referred to as French windows, and they may be found in a variety of shapes and sizes. It’s critical to take accurate measurements and choose the appropriate size so that you don’t have to do a lot of additional effort to make the doors fit in your area. French doors are available in a variety of conventional widths, although the majority of the time, each door is between 30 and 72 inches wide on average. French doors are often sold as a set of two doors.

Closet Doors

Closet doors and utility doors are frequently smaller in size than both entry doors and interior standard doors, which is common.

Closet doors in older homes (those constructed before to the 1990s) might be as tiny as 18 inches in width. Newer construction, on the other hand, frequently has a larger width of around 30 inches and a higher ceiling height of up to 96 inches.


Doors don’t have to be dull or plain in order to be effective. Finding and installing beautiful doors that stand out in and around your house is simple with a little research and effort on your part. Are you ready to replace the doors in your home? Contact Window World now to learn more about our assortment of doors and to receive a free quote on your project. Having learned the basics of standard door width, let’s speak about some home improvement projects you may try out. Your colleagues at Window World will be delighted to discuss any suggestions you may have with you.

Standard Interior Door Size (Dimensions Guide)

Listed below is our standard interior door size chart, which includes the most often seen door dimensions for the bedroom, bathroom, and closet. The height of the door is the most common measurement for this type of door. All internal doors that will be utilized as passageways between rooms should be at least 80 inches in height to provide proper ventilation. (6’8) This provides enough space for the great majority of individuals to pass through the doorway without hitting their heads on the door jamb.

Closet doors are commonly installed at a height of 78 inches (6’6″).

What Is The Standard Interior Door Size?

The standard widths for various types of interior doors can range anywhere from 24 inches to 36 inches in width. Interior doors are typically 32 inches wide, which is the most common width. As a result, the conventional internal door dimension is 32 inches wide by 80 inches high. The majority of individuals are able to pass through a doorway of this size without brushing up against the edges of the frame. The width of each door in your home must be at least 36 inches wide if you want to make it wheelchair accessible.

Standard Interior Door Thickness

Interior doors are typically 13/8″ thick, which is the most common thickness. There are a variety of door thicknesses available, including 112″, 158, and 134″. Oversized or extremely huge doors (those that are more than 90 inches tall or more than 36 inches wide) are often thicker than standard-sized doors. They are also more expensive. When selecting door hardware, such as doorknobs and hinges, the thickness of the door becomes crucial to take into consideration. Fire doors are also thicker than conventional interior doors, making them more resistant to fire.

How to Measure a Door

Doors are one of the finishing touches that may be added to a new building project, but you shouldn’t put off thinking about them until the very end of the project. During the framing phase, it is determined what size the door will ultimately be. In order to create a ‘rough opening’ between rooms that is sturdy enough to hold a door and door frame, contractors install studs between the rooms. The general rule of thumb for rough openings is that they should be two inches wider than the door that will ultimately be put in them.

When it comes to height, the rough opening must be at least two and a half inches higher than the door it is intended to accommodate.

Once you’ve created a rough opening, the next step is to build a door frame and hang a door, or you may install a pre-hung door that has already been installed.

Professionals recommend that you measure the entryway (the aperture through which the replacement door will hang) rather than the existing door when determining the suitable size for a replacement door.

This is due to the possibility that wood (in either the door or the door frame) has warped or changed shape as a result of exposure to the elements. You’ll also need to figure out what kind of thickness you want your replacement door to be.

Door Width and Height

If you want to know how wide the door you will need to order is, you should stand in front of the existing door and wait for it to open away from you. Open the door, and prop it open if required, to avoid getting your fingers pinched in the hinges of the doorframe. Measure the distance across the door opening with a tape measure by placing one end against the inside of the door frame and the other end against the outside of the door frame. A parallelogram should be drawn between the tape and the floor.

Your new door will be ordered based on the first measurement you take, which will be the largest of those three measurements.

As you would when measuring the width of a door, stand in front of it and open it away from yourself.

Both of these measures should be precisely the same as one another.

Door Thickness

You may utilize the current door to take the final measurement, which is the thickness of the door. Mark off numerous spots along the border of the door where you want to take measurements with a tape measure. This is especially crucial if you plan to reuse the hinges or door knob, as these pieces of hardware are built depending on the thickness of the door and must be installed correctly the first time.

Interior Door Sizes

Buildings of one or two stories, as well as townhouses, are subject to standardized criteria of safety and accessibility under the International Residential Code (IRC). In addition to any applicable municipal codes, this is what the home inspector will refer to when he or she comes to sign off on your new house. While there are severe criteria for the main entrance to a property, there are no such rules or regulations for inner doors. Where they are present, all that is required is that they be in excellent functioning condition and that they are installed in accordance with manufacturer’s specifications.

Standard Bedroom Door Size

There is no standard size for bedroom doors because they are all different sizes. Interior doors are typically 32 inches wide and 80 inches high, much like the rest of the house. The normal thickness is 1 3/8″ in diameter.

Interior Double Door Sizes

In terms of bedroom doors, there is no conventional size. They are typically 32 inches wide and 80 inches high, similar to other internal doors. One and three-eighth inches is the usual thickness.

Standard French Door Size

A ‘French’ door is comprised of a thin/light frame that surrounds panes of glass in a symmetrical pattern. The panes of glass generally account for the vast bulk of the door’s total floor space. They are frequently, but not always, hung in groups of two.

If the doors are to be hung in pairs, they must be the exact same size and thickness. A French door does not have a set door size since they are made to order. There are several sizes of French doors available, with the lowest measuring around 30 inches and the largest at 72 inches.

Standard Closet Door Size

Neither the International Residential Code nor the International Building Code regulate or standardize closet doors. The size of the rough aperture is the sole constraint on the design. In most cases, closet doors are 30 inches wide by 80 inches high. Bifold doors are commonly found in closets; instead of swinging out into the room, these doors fold in on themselves instead. The typical width of a bifold door panel is 24 inches wide. More information about closet door sizes may be found here.

Standard Bathroom Door Size

A bathroom door must comply to the same basic size requirements as any other interior door in order to function properly. It should be at least 80 inches high and 24 to 36 inches broad to be effective. The thickness and design of the door should be in harmony with the design of the door frame.

Standard Front Door Size

It is important to note that a front door is an external door, which means that it connects the inside of your property with the outside. A house’s main entrance must be at least 80 inches tall and 36 inches wide in order to comply with the International Residential Code. (Side doors and back doors can be narrower in width; the most frequent widths for these doors are 28″, 30″, and 32″ in width.) Exterior doors also have the extra job of protecting your property from the weather and keeping the temperature inside your home consistent.

Typically, the thickness of a normal front door is 13 inches.

Interior Door Sizing Considerations

Making selections concerning interior doors is difficult since you will be forced to live with the consequences of your decisions for the duration of your ownership of the property. The process of going back and making a doorway larger or narrower is difficult and time-consuming; yet, it is sometimes necessary. All of the inside doors in your home should be of the same style and design to avoid confusion. If you have a doorway that is not conventional, be sure that the door you choose is available in all of the sizes you require.

If you want to live in your house for the foreseeable future or currently have mobility issues, consider making all of the doors 36 inches wide.

Lastly, take into consideration the finish of your inside door.

Two coats of priming followed by two coats of paint can add as much as 1/32″ to the width of the door on either side of the threshold.

Standard Door Frame Size

It is necessary to put door frames into the rough aperture in order for the door to be supported properly by the frame.

The door is then connected to the door frame with the use of hinges. Although there is no universally accepted standard, the most typical door frame size in the United States is 36 inches wide by 80 inches tall.

Prehung Door Sizes

Pre-hung doors are pre-hung doors that have previously been attached to a frame with hinges. The frame of the door just has to be hammered into the studs around the rough opening, and then the door is ready to be completed with molding. This method is quite popular among do-it-yourselfers, and for good reason. Hanging a door requires a certain degree of patience and skill, and even experienced pros might find it difficult at times. Purchasing a pre-hung door eliminates all of the guessing and requires no special skills.

They are normally available in two basic widths — 30 inches and 36 inches — depending on the manufacturer.

Selecting an Interior Door

Interior doors can be basic and unadorned, or they can be ornately designed. Choose a door that complements or enhances the architectural style of your home, rather than one that matches or enhances the present dcor of your home. Tastes vary with time, but doors are built to last a long time and are seldom replaced, so you want to pick a decision that will look excellent for many years to come. When considering doors, three factors should be considered: materials (what the door is made of), functionality (how the door will be used), and cost (remember to include in both materials and labor costs!)

Door Materials

Wood is the most popular material for interior doors, and it is also the most expensive. The cheapest doors feature a hollow core and are made of wood or fiberboard, which makes them the least costly. Solid wood doors are also available upon request. Glass, stainless steel doors, fiberglass, and aluminum are some of the other materials that may be used for doors. The material and design of your door should be complementary to the overall look and feel of your house. Consider the following example: A sleek, fiberglass door might be ideal in a modern home, but it would appear out of place in a more classic cottage setting.

See also:  What Is The Best Paint Brand For Interior Walls

Door Functionality

When selecting a door, keep in mind the function it will perform in your home. Doors serve as a visual and physical barrier to a space, as well as a means of maintaining privacy. These materials can also be used to produce sound isolation and dampening. This is one of the reasons why many homeowners prefer to install stronger doors in their bedrooms or home offices. Consider how you want the door to open and close. Is it better to have it open into the room or out? Should it be hung on the left or right side of the door frame, depending on your preference?

Does there appear to be enough space to the side of the rough opening to allow the door to be completely opened in that case?

Because it reduces the likelihood of colliding with someone walking by, interior doors that link a room with a corridor are often opened into the room.

When an internal door links two rooms that are not connected by a corridor, the direction in which the doors swing is dictated by the convenience of the users.

Door Cost

For a single door, you may anticipate to pay between $50 and $500 for the door frame and hardware. It is simply your time that will be extra expensive if you do the hanging yourself. In the event that you hire a professional to install it, you may anticipate to pay between $100 and $300 per door, depending on your location and the intricacy of the door in question. Pre-hung doors are often somewhat more expensive to purchase than unfinished doors, but they can be less expensive to install.

Door Rough Opening Sizes and Charts

The door and the opening’s frame should have enough space to be adjusted. The term “rough framing” refers to the process of framing a wall. Not all rough apertures are perfectly plumb and square when they are first constructed. You will be able to correctly plumb, level, and square your door installation if you allow for this extra space. 2.After then, not all doors are precisely the same size. The dimensions of the door will vary depending on the manufacturer. Although this is often not a significant amount of space, if your rough opening was small, or the same size as the door and jamb, you may have difficulty getting the door to work correctly without more space.

Yes, your wall grows and shrinks in proportion to the changing seasons.

As previously said, we are talking about minor amounts of movement, sometimes less than 1/16′′ of an inch, yet even this can be enough to cause that once-perfectly fitted door to start sticking, rubbing against the frame, or failing to latch securely.

Door Installation Quick Tip

For carpeted floors, raise the door jambs about 3/8′′ above the floor level before installing the carpet. Allowing enough room forthecarpetto be tucked under the jambs, as well as allowing enough clearance forthe door to not rub on the carpet If your floor isn’t level, it will also allow you to shift the latch side up or down independently of the hinge side, which is a significant advantage. Take a look at this video to get a visual demonstration of how to install a door. Alternatively, I still want assistance with my door or window heading.

Standard Door Sizes: Average Height & Width

When you make the decision to build your ideal house, you will be confronted with a slew of regulations that you must adhere to. One of those specifications will be the size of the doors in your future home. However, there is no reason to be concerned that these laws will have a negative impact on the originality and creativity of your home. On the contrary, they are there to make the lives of inhabitants more practical and safe by providing them with services. The standard door sizes reflect the bare minimum size that must be adhered to for the sake of safety considerations.

You may, of course, increase or decrease such restrictions as you see fit. Whether you choose conventional door sizes or custom-made ones, the decision is entirely up to you. Let’s see what happens.

Types of Doors

Exterior doors, sometimes known as entry doors, and interior doors are the two most common types of doors. Because they are used in diverse ways, the criteria that apply to them are also distinct. For the safety of your family and to avoid incurring construction fines, it is critical that you adhere to the requirements of the state in which you reside. Building codes and regulations should ensure that all members of society, including children, elders, persons of tall stature, and those with special needs, may perform safely and effectively.

Entrance Doors

It is recommended that the measurements of the typical front door be at least 80 by 30 inches (2,032 x 762 mm). Contemporary door types, on the other hand, are available in a variety of different sizes. These new dimensions have just lately become the norm for households all over the United States of America. Keep in mind that these standard door measurements are for a single-entrance door only and are not for double-entrance doors. As a result, you may pick from three different types of entry doors, all of which have conventional dimensions, including: It is customary for all door designs and kinds to have a thickness of 1.75 inches (44.45 mm).

Single Entrance Door Size

As previously stated, single front doors are the smallest of all the door kinds, and they are available in three basic standard sizes:

  • There are four sizes available: 80 inches by 30 inches (2,032 x 762 mm)
  • 80 inches by 32 inches (2,032 x 813 mm)
  • 80 inches by 36 inches (2,032 x 914 mm)
  • And 80 inches by 48 inches (2,032 x 1,024 mm).

However, there is another conventional height of the entry door that has lately gained popularity and widespread use in the United States: Please keep in mind that many American homes also feature back-entrance doors, and that there is also a standard for these doors. The typical size for these doors is 80 by 36 inches (2,032 x 914 mm), which is followed by the majority of construction businesses.

Double Entrance Door Size

Extra-large double-paned exterior doors are an excellent choice for stately homes. These models, who seem like royalty, will infuse your house with a sense of elegance and richness. Make your selection from among the many different types of styles, materials and colors that are available on the market. Typically, the double external door is divided into two equal pieces by its conventional door size. Typically, they stand 80 inches (2,032 mm) tall, with a breadth that varies depending on the model.

  • Inches: 60 inches (1,524 mm), which contains two 30 inch (762 mm) wings
  • 64 inches (1,626 mm), which includes two 32 inch (813 mm) wings
  • 72 inches (1,829 mm), which includes two 36 inch (914 mm) wings
  • And 84 inches (1,829 mm).

Transom Entrance Door

Due to the fact that transom doors have no set opening size or minimum height, the forms of transom doors are rather diverse. In most cases, they feature a single tiny aperture above the door itself, however certain versions might include extra components on both sides of the entrance. You should check at some of the basic sizes and forms accessible before making a final selection, due to the fact that they are non-standard.

Following that, everything will be determined by your personal preferences and taste, as well as the manufacturer’s offer and availability. There are three choices that you should think about: 1.

1. Straight top transom door Size

If you’re looking to purchase a straight top transom double door with windows on either side, the following measurements are available to you:

  • 118 by 104 inches (2,997 x 2,642 mm)
  • 130 by 128 inches (3,302 x 3,251 mm)
  • 118 by 104 inches (2,997 x 2,642 mm)

A straight top transom double door with no side windows will measure 110 by 76 inches if you like this kind of double door (2,794 x 1,930 mm). Another option is the straight top transom single door, which has a standard size of 106 by 40 inches (2,692 x 1,016 mm) without side windows and has a standard dimension of 106 by 40 inches (2,692 x 1,016 mm) with side windows. If, on the other hand, you prefer vehicles with side windows, you may choose between two common options:

  • 113 by 64 inches (2,870 x 1,625 mm)
  • 119 by 76 inches (3,022 x 1,930 mm)
  • 113 by 64 inches (2,870 x 1,625 mm)

2. Elbow top transom door Size

These doors have a sophisticated and elegant appearance, and you may choose between a double and a single model, depending on your preferences. The normal size for an elbow top transom double door without side windows is 118 by 76 inches, according to the International Building Code (2,997 x 1,930 mm). The following are the measurements for a double transom door with elbow top when side windows are added:

  • 125 by 104 inches (3,175 x 2,642 mm)
  • 132 by 128 inches (3,353 x 3,251 mm)
  • 125 by 104 inches (3,175 x 2,642 mm)

Alternatively, if you don’t have enough room but still want an elbow top transom door, you may pick a single model without side windows to accommodate your needs. The following are the sizes that are available:

  • 103 by 40 inches (2,616 x 1,016 mm)
  • 108 by 64 inches (2,743 x 1,625 mm)
  • 103 by 40 inches (2,616 x 1,016 mm)

3. Arched top transom door Size

The transom doors with arched tops show the refined style and elegance that may be traced back to ancient Rome. They are more than simply a door; they are also a work of art and the pinnacle of architectural design. A single or double door type can also be selected, depending on your preference for simplicity or elegance. The measurements of twin doors with arched transoms and no side windows are 128 by 76 inches without the side windows (3,251 x 1,930 mm). The identical doors with side windows will have a dimension of 142 by 104 inches when they are finished (3,606 x 2,641 mm).

Alternatively, if it is equipped with side windows, the door’s dimensions will be 122 by 64 inches (3,098 by 1,625 mm) in size.

Interior Doors Size

There are also various different types of interior doors, each with their own set of size criteria. They include common types such as the following:

  • Interior doors of several types, including standard interior doors, double interior doors, bedroom doors, and French interior doors

The thickness of the panel is the same for all varieties, and it can be any of the following options:

  • 6 inches (40.6 mm)
  • 75 inches (44.5 mm)
  • 5 inches (38 mm)
  • 6 inches (40.6 mm)

Standard interior door Size

Some interior doors are more functional than others, and some are less aesthetic than others, but they are no less significant. Essentially, they all serve the same purpose Interior doors are typically 80 inches (2,032 mm) tall and 32 inches (812 mm) wide, with the height being the same as the width. If any of the residents require the use of a wheelchair, the door must be 36 inches (914 mm) wide to accommodate them.

Double interior door Size

Because they are broader than typical door widths, the double internal doors will provide the appearance of spaciousness, luxury, and grandeur to the room. When used in places with high ceilings, it is quite effective.

You should search for a double inside door with a typical height of 80 inches when shopping for the best double internal door (2,032 mm). There are several alternative door widths to choose from on the other side, including the ones listed below:

  • 60 inches (1,524 mm), 64 inches (1,625 mm), and 72 inches (1,828 mm) are the standard lengths.

Custom built doors can be whatever size you desire as long as they are not smaller than the minimal criteria.

Bedroom Door Size

You should bear in mind while shopping for a bedroom door that there is no standard size for this particular sort of door. You can choose a model that appeals to you the most or one that is compatible with the current door opening. However, there are certain standard sizes of these doors available on the market in the United States. Typically, they stand 80 inches (2,032 mm) tall, with a breadth that ranges from 24 to 36 inches (610 – 914 mm).

French interior doorsSize

French doors have the appearance of large windows and are commonly found in many homes due of their aesthetic appeal. Furthermore, they provide more space and allow for more natural light to enter the home. These doors are divided into two sections by glass panels, which run from the bottom to the top of the door. The normal dimension for a French interior door is 80 inches by 36 inches (2,032 x 914 mm). The variants with widths ranging from 24 to 42 inches (610 – 1,066 mm) are available, however.


People’s lives and even personalities may be revealed via the front entrance of their residence. The moment you go through the front door, you are physically entering someone’s life and home. It’s no surprise that there are so many different architectural styles available to you. Since you now know everything there is to know about door size standards, you should think about additional possibilities for the door you want to purchase.

Leave a Reply

Your email address will not be published.