What Paint To Use For Interior Doors

16 Pro Tips for Painting Interior Doors

17th of January Are you thinking of painting an internal door? Whether you remove the door off its hinges or leave it in place will be a decision to make, and there are advantages and disadvantages to both options. In any case, the advice provided here, which was compiled by expert painters and interior designers, will assist you in completing every area of the project with relative ease, from color selection to tool selection to key prep and painting procedures. So continue reading to learn how to master the techniques and get clean, gorgeous results on any interior door in your home.

1. Determine the previous paint type.

2nd of February, 2017 Before applying a new coat, determine if you’ll need to prime the door first by examining the type of paint that’s existing on the surface. Using rubbing alcohol, dampen a cloth and brush it on the inside of the door. If the paint transfers to the cloth, it indicates that the surface has been painted with a latex-based product, and no priming will be required. This indicates that you’re working with an oil-based paint, and that you’ll need to prepare the surface beforehand if you want to use a newer latex recipe.

Another reason for determining the type of old paint is the potential health hazard posed by lead.

Lead may be absorbed by the body, causing organ and brain damage.

If this is the case, you will need to proceed with greater caution and professional knowledge while sanding and removing it.

2. Purchase quality tools and materials.

3rd of March, 2017 To achieve professional results, you’ll need to use high-quality equipment. To paint the door and trim, spend at least $10 on a high-quality 2- to 212-inch sash brush of at least 10 inches in length. In the event that you want to utilize a roller rather than a sponge, look for ones with microfiber roller sleeves, which hold more paint and provide a smoother finish than foam. Don’t scrimp on supplies such as drop cloths, a paint tray, and sandpaper. Hyde Tools 45810 Super Guide Paint ShieldSmoothing Tool —this excellent straightedge with an easy-grip handle will give you flawless edges on trim without the need to tape — is another tool that experts use to expedite the painting process and eliminate clutter.

3. Consider surprising colors.

4th of July, 2017 Traditionally, doors have been painted in the same color as the walls surrounding them; however, designers are now employing interior doors to offer unexpected accent colors that make a statement in a space.

Especially effective when the door itself has distinctive woodwork and molding, which may be refreshed with a splash of vivid color or an industrial neutral like slate gray or even black, as shown here. istockphoto.com

4. Choose the best finish.

5th of May, 2017 Interior doors in high-traffic areas can be anticipated to have fingerprints and filth on them. Choose paint with a gloss or semi-gloss finish rather than a flat or eggshell finish to create a surface that is considerably simpler to clean than other finishes. A glossier paint also helps doors and trim stand out more prominently against a flatter wall surface, which is particularly attractive. What’s the Difference Between the Two? Semi-Gloss vs Satin Finish Paintistockphoto.com

5. Pick the perfect shade for trim.

6th of June, 2017 The following is the rule of thumb that designers follow: If you plan to paint your door white or another light neutral color, make sure you paint the trim around it the same color. In the event that you pick a deeper colour, mix it with a trim that is off-white or neutral in tone. If you want to paint the door a deeper color, start by painting the trim first, allowing it to dry completely for at least 24 hours, then protecting it with painter’s tape before painting the main section of the door.

6. Detach correctly.

7th of July, 2017 While you may absolutely cover the floor under and around the door and paint it in situ, professionals know that it’s preferable to take the time to remove the door from its frame in order to get flawless results. When the door is placed on a flat work surface, it is simpler to fill and sand cracks and defects prior to painting them. Furthermore, because the container is in a horizontal position, gravity has little likelihood of causing ugly drips and globs. To remove the door from its hinges, hammer and nail the hinge pins until they become loose; the door should then slip off its hinges.


7. Remove the doorknob.

Paint splatters on a doorknob are a telltale indicator of a shoddy job. 8/17 Even more concerning, the moisture in paint can have a negative impact on door hardware, perhaps blocking the locking mechanism; sanding and cleaning solvents can also cause harm to door hardware. To avoid such issues, remove the knob rather than merely taping it off. To remove the screws, use a screwdriver to pry them out. Look on the side of the handle for a small metal-covered slot if you can’t see any screws on the top or bottom.

If the knob is still in place, you may remove the “rose” or plate holding it in place.RELATED:The 8 Painting Mistakes Almost Everyone Makes (Photos by Stockphoto.com)

8. Fill holes and cracks.

9th of September, 2017 Painting a door, especially an older wood door with trim and molding, usually necessitates considerable preparation work because of the uneven surface. Up the first instance, fill in any minor holes or cracks in the surface using a high-quality wood filler or spackle, which is a gypsum plaster and adhesive filling combination that shrinks very little after drying and may be painted without the need for priming (and sometimes even without sanding).

Scrape a tiny quantity of spackle or wood filler into the hole with a putty knife, making sure to spread it evenly, and allow it to cure for approximately two hours. Check to see if you need to add any additional spackle or filler, then sand the areas that have been filled in smooth. istockphoto.com

9. Sand and prime.

tenth of october seventeenth Completely sand the whole front door surface with 120-grit sandpaper, either manually or with a power sander, after any flaws have been filled, dried, and polished. Remove any surface dust from the door by wiping it with a delicate cloth moistened with mineral spirits and drying it with another soft cloth. If you’re painting over oil-based paint, use primer first so that you may switch to latex later if you choose. Gently sand the surface again with a 220-grit sandpaper after the priming coat has been allowed to cure completely (ideally overnight).

10. Prop it on points for painting.

17th of November After the surface has been sanded down to a nice finish, it is time to paint. Rather of placing the door squarely on the work area, raise it by a few inches to make it easier to see through. This will allow for more airflow and reduce the likelihood that a somewhat moist paint coat will adhere when you flip it over to paint the opposite side. These are the situations in whichPainter’s Pyramidscome in helpful The robust plastic pyramids, which are secured to the sawhorses through handy holes, allow you to lift the door by two inches while simultaneously decreasing the surface area in touch with fresh paint to small points when you flip the door to paint the other side.

11. Paint without a break.

17th of December Now that you’re ready to begin the real painting process, paint the door in one continuous motion, without pausing for breath. If you take a break for even a few minutes during a coat, the paint will dry unevenly, resulting in a spotty appearance. Latex paints can be dry and ready for a second coat in as little as four hours, depending on the temperature. A second coat of oil-based paint must be applied after 24 hours if the first application was successful. After the initial layer has dried, it is common for professionals to recommend sanding it again using 320-grit sandpaper.

OTHER RELATED:12 Simple Fixes for a Blotchy Paint Job Jobistockphoto.com

12. Approach paneled doors properly.

13th of July, 2017 A flat door should be painted using long, smooth brush strokes or vertical roller strokes, which is the most basic approach. Interior doors, on the other hand, are frequently paneled and should be painted in the following order: 1. Begin by painting the margins surrounding the door, including the top, sides, and bottom. 2. Painting the inner panels will be the next step. Six panels are often used, with two square panels at the top, two rectangular panels in the center and bottom, and two square panels in the middle and bottom.

Next, paint the vertical strips between the panels, starting at the top.

Finish painting the horizontal strips at the top and bottom of the door using a flat black paintbrush.


13. Save time with a sprayer.

the thirteenth of seventeenth Long, smooth brush strokes or vertical roller strokes are the most basic painting technique for a flat door. The following is the sequence in which to paint interior doors, which are typically paneled: Paint the door’s top, sides, and bottom first, and then the borders surrounding the door. Painting the inner panels will be the second stage. Six panels are often used, with two square panels at the top, two rectangular panels in the center and bottom, and two rectangle panels at the sides.

Afterwards, paint the vertical stripes that run between the two panels. 4. Finish painting the horizontal strips at the top and bottom of the door using a flat black paint brush. Finish by painting the vertical stripes on either side of the door. 6. istockphoto.com

14. Speed up dry time.

15th of July, 2017 Light, even layers of paint should be used to save drying time; heavy coats take longer to cure and might result in an uneven appearance. Use a brush to dip the bristles halfway into the paint and tap or scrape the bristles against the side of the container to remove excess paint. The roller should be placed in the pan and rolled back and forth until it was evenly coated and completely coated, but not soaked, before being removed from the pan. Recommendation: If you are using a fresh roller, leave it to rest for approximately a minute after covering it with paint to allow the paint to completely permeate into the fibers.

If feasible, keep a dehumidifier running in hot, humid regions.

15. Leave the door open.

16th and 17th While a door is still connected, remind family members and guests not to touch or close the door for at least two days to keep the edges and trim from being damaged during painting. Keep in mind that the drying time may vary depending on the type of paint you chose. Oil-based paints dry more slowly than latex paints, and this is especially true for acrylic paints. Rehanging a detachable door after the second coat has dried fully is recommended if the door is painted. istockphoto.com

16. Install new knobs for a total transformation.

17.17 /17 /17 /17 /17 /17 /17 /17 /17 Adding new door hardware will make a significant change in the appearance of your home. Of course, functionality is essential, but thankfully, for the majority of interior doors, a basic lock is sufficient (unlike exterior doors, where security is paramount). Also consider whether a twist knob or a handle is more appropriate for your requirements. After that, think about your personal style. Using a colorful crystal doorknob may bring a touch of glitz to your home.

In order to achieve a contemporary and minimalist style, a slim door lever in brushed nickel or bronze is recommended.

Don’t Miss!

Sign up today to receive important reminders and helpful hints for maintaining and upgrading your house and property!

The 9 Best Paints for Interior Doors of 2022

Discover more about our review method here. Our editors independently investigate, test, and suggest the finest goods. We may gain a commission if you make a purchase after clicking on one of our links. You have arrived to the correct location if the doors in your home might use some TLC. Interior door paint is, for the most part, comparable to wall paint in appearance. Modern formulae are frequently both a primer and a lacquer in one package. They conceal flaws, repel stains, are often washable, and provide an aesthetically attractive finish that lasts for many years.

  1. Whether you’re wanting to highlight your doors with a trendy colour or want something a bit more adaptable, there is an interior door paint to suit your needs.
  2. Without further ado, here is a list of the finest interior door paints available.
  3. This paint is available in three finishes (semi-gloss, eggshell, and matte), as well as 32 carefully selected hues to suit any interior design scheme.
  4. Read the full reviewThe sleek, antimicrobial surface is great for moisture-prone regions and high-traffic areas such as entryways, kitchens, and mudrooms, among other places.
  5. Check out the review One coat gives outstanding coverage and dries to a velvety-smooth flat finish, and it is simple to clean with soap and water after use.
  6. Read the full review.
  7. Check out the review The long-lasting solution conceals existing defects and prior colors, while also preventing further stains from forming.

Check out the review Container capacity: 1 gallon |Paint type: acrylic|Surface preparation recommendations: properly prepared uncoated or painted interior surfaces |Usage: interiorWhat We LikeAbout This Product

What We Don’t Like About It Among our favorites is the Behr Marquee Interior Enamel, a sumptuous and flexible lacquer that can be tinted to practically any color, including anything from Behr’s large color collection and custom-matched colors, and is available in a variety of finishes. It is available in several sheens, including flat, eggshell, satin, and semi-gloss. Because you only need one coat, a quart of paint is sufficient to cover up to four interior doors (or about 100 square feet).

  1. As an antibacterial and low-VOC (volatile organic compound) product, it is safe and appropriate for use in every room of your house.
  2. As a result of years of experience working with and testing many paint products, we’re excited to announce The Spruce Best Home Interior PaintPrimer, a flexible, long-lasting, low-VOC acrylic solution that can be used on both doors and walls in the home.
  3. The long-lasting enamel glides on to doors, concealing any defects that may appear and providing protection against scuffs, grime, mildew, and other residue.
  4. Best of all, it is available in 32 carefully selected colors and three different finishes (eggshell, semi-gloss, and matte) to suit any interior design scheme.
  • Affordably priced
  • Low in volatile organic compounds
  • Can be coloured to over 1,000 different hues When dry, it is scrubbable and washable.
See also:  How To Be An Interior Design

What We Don’t Like About It You can handle most (if not all) of the doors in your home with a gallon of Glidden Essentials, which is quite affordable and covers up to 400 square feet. Having stated that, depending on the color of your current doors, you may need to apply a second coat. This low-VOC and low-odor latex paint may be tinted to produce up to 1,000 different colors, and it is available in three different finishes: flat, eggshell, and semi-gloss. We particularly love the fact that the long-lasting composition is scrubbable and washable after it has been dried.

It applies smoothly, and a single coat is sufficient to conceal defects while also protecting your doors from future stains and stains.

The sleek, brilliant shine may be tinted to a broad spectrum of hues to match or enhance your current décor, depending on your preference.

Container capacity: 1 gallon |Paint type: lacquer|Surface recommendation: several surfaces |Use: interior and exterior |Container capacity: 1 gallon |Paint type: lacquer|Container capacity: 1 gallon |Container capacity: 1 gallon |Container capacity: 1 gallon What We Appreciate

What We Don’t Like About It If you’re searching for a paint with an ultra-glossy shine, Valspar High-Gloss Paint + Primer is a great choice. This multi-purpose glossy lacquer may be used to paint interior doors, cabinets, baseboards, shutters, and just about everything else you can think of. In addition to providing a luxuriously sophisticated appearance, the glossy finish will remain intact for years to come owing to the gloss-lock technology. It can tolerate heavy usage, is resistant to mildew, and will not get dull when washed or scrubbed.

  • Rust-Oleum Chalked is the best option for you.
  • Apart from that, it is simple to clean with soap and water, unlike other flat compositions.
  • This quick-drying enamel is available in a variety of neutral tones and vibrant colors that are ideal for use on interior doors.
  • Surfaces recommended for use include wood, concrete, plaster, masonry, hardboard, and metal surfaces.
  • What We Appreciate
  • Adheres to smooth surfaces
  • Has a long shelf life. It can withstand corrosion, scuffs, cracking, and peeling
  • It is durable.

What We Don’t Like About It Diamond Brite Oil Base Enamel is the most effective paint for metal doors. It sticks to even the slickest surfaces, such as stainless steel, aluminum, and other metals, since it is formulated with high adhesion properties. While two coats of paint are required to fully cover a metal or wood surface, a gallon of paint is sufficient to paint up to eight doors. It has been shown to survive for years and to withstand corrosion, scuffs, cracking, and peeling in the field.

  • Low volatile organic compound (VOC)
  • A variety of hues and sheens
  • A paint and primer in one

What We Don’t Like About It If you’re pressed for time, pick up a can of The ONE from your local supermarket. As a paint and a primer in one, this multipurpose interior enamel allows you to get started straight away with your project. Furthermore, because of the thick, opaque recipe, only one application is required. There are a variety of elegant hues available in this water-based, low-VOC lacquer, as well as the option of a matte, satin, or glossy shine.

It may be used to cover a variety of surfaces around your house, including wood or metal doors, cabinets, baseboards, door frames, trim, and shutters. Oil-based paint in a 1 gallon container |Paint Type: Oil|Recommended Surface: Metal |Usage: Interior and outside What We Appreciate

What We Don’t Like About It When it comes to paint primers, KILZ Premium is a difficult competitor to overcome. The long-lasting and efficient product effectively conceals existing markings, defects, and prior colors, while also acting to prevent future stains from appearing. This water-based solution also serves to seal your doors, allowing you to obtain a smooth, consistent surface on your doors. It clings to a wide range of interior surfaces, including wood, metal, and laminate. Additionally, it is engineered to be resistant to mildew and mold, making it an excellent choice for bathrooms, laundry rooms, and other spaces that are subjected to excessive dampness.

For inside painting, we recommend Behr Marquee Interior Enamel Advanced Stain-Blocking PaintPrimer (available at The Home Depot), which is a multipurpose acrylic enamel that’s simple to clean and is designed to stand up to future stains and spills.

We guarantee that you’ll discover something that suits your style and environment among the 32 skillfully picked colors available in three finishes.


One of the most significant factors to consider when selecting paint for inside doors is the shine. This is in addition to color and is often overlooked. In terms of finish, the most frequent choices are satin and eggshell, which aren’t too shiny but aren’t completely flat either. Finally, high-gloss paint provides a shinier, sleeker appearance than standard paint. Those who want a flat finish without any sheen will appreciate matte lacquers, which are available in a variety of colors.

Ease of Cleaning

The majority of interior paints available on the market today are designed to be easily cleaned. The best solutions can not only be washed with soap, but they can also be scrubbed down if necessary. Something that will withstand a little elbow grease and will not chip, peel, or become dull or fade after repeated cleanings is what you’ll be looking for. More glossy paints tend to be simpler to clean, and high-gloss formulations that won’t scratch or degrade when cleaned are available in various colors and finishes.

Just be sure to read the product description to make sure it can be washed with soap and water before purchasing.


In terms of painted surfaces in your home, doors are the ones that get the most attention. As a result, a recipe that is both long-lasting and durable is required. When it comes to your vehicle, you’ll want something that can survive high traffic and regular wear and tear. Additional recommendations include using paint that is resistant to fading, chipping, peeling, and mildew growth, particularly in high-traffic, highly lighted areas as well as moisture-prone rooms. FAQ

  • What is the best way to paint a door? Painting your front door is a terrific method to improve the appearance of your home’s exterior. Remove your door, sand it down, and then paint it with oil-based, latex, or glossy paints, depending on your preference. In all, the project will take around 12 hours
  • Therefore, begin early in the day to ensure that you will not be without a door at night. How much paint do you need to paint a door and how long does it take? To paint an outside door that has been primed, you’ll need around one quart of paint. The amount of paint required depends on how many doors you have in your house. Primer is important because it helps the paint to adhere correctly to the door, resulting in less paint being used to get a deep color. Should you use the same paint for the door as you would for the door frame and/or door trimming? When painting the door trim and the door itself, as long as you’re using a paint that’s intended for outdoor usage, you may use the same product. The choice to paint the trim a different color to enhance the door and make it stand out is entirely up to you
  • However, you should consider the following factors:

The contributor to The Spruce A seasoned commerce writer with a focus on home renovation and interior design, Theresa Holland has written for several publications. Decor, restoration materials, and do-it-yourself supplies are all areas in which she has extensive knowledge. More of her work may be seen on her website, MyDomaine.

Additionally, research is given by Lauren Murphy, a long-time writer and editor who specializes in DIY projects, home improvements, and other home-related issues, and who has written to The Spruce and its sister publication, Spruce Pets, for years.

How to Paint a Door: My Best Tips for Painting Interior Doors!

Do you want to know how to paint a door like a professional? Painting interior doors is a snap when you follow my simple step-by-step instructions, and you’ll achieve the professional finish you’re after in no time! The previous two residences we’ve lived in were older homes with doors that were yellowed and in poor condition, so as I redecorate each room, I also paint the doors to match. Isn’t it amazing how much of an improvement a fresh coat of paint can make? This is especially true if you’re also changing out the hardware!

Also, I’ve tried with many painting equipment and processes over the years and have finally worked out what works best, so now I’m going to share my tips and tricks for painting inside doors like a master!

1. Choose an Interior Door Paint Color

If you’re painting your door white and you have white trim around it, I recommend that you use the same paint color and finish as the trim surrounding your door. Some of my favorite whites for trimwork and doors are Benjamin Moore’s Cloud White and Dove White, both of which are available in semi-gloss or satin finishes. You could also want to think about painting your doors a different color than white – interior doors in dark black or gray are a stunning option! A dark gray (Benjamin Moore Charcoal Slate) was just painted on the door that leads from our kitchen to the garage, and I really adore it.

Listed below are my top six interior door paint colors, in no particular order: Benjamin Moore is the designer of the whites.

Benjamin Moore Cloud White is a color that seems to be cloudy (Cloud White has a bit less yellow undertone) Grays in the light to mid-tone range: Sherwin-Williams Repose Gray and Benjamin Moore Charcoal Slate are two examples.

Benjamin Moore Wrought Iron are examples of dark grays.

2. Gather Your Painting Tools

You’ll just require a few more items in addition to your paint to complete your door painting project, which include the following: If it’s an ancient door with nicks, I recommend using wood filler (which is my favorite because it doesn’t dry out as soon as filling in a conventional container). as well as a putty knife Tack cloth (I use 150 grit and 220 grit) and sandpaper Drop cloths made of canvas or plastic can be used to protect your floor (I usethat you can wash and reuse) Roll of painter’s tape, such asUtility knife, such asPaintbrush –this is my favorite because it works with both oil and latex paints and is inexpensive.

4′′ woven rollers with a 1/4′′ nap, such as, or 4′′ foam rollers, such as, are also effective options. For 4′′ rollers such as Mini roller trays, there is a roller handle for them.

3. Prep Your Door for Painting

Preparation is always the most important step in the completion of any painting project. You have the option of painting your doors while they are still in place or removing them and painting them on sawhorses. Alternatively, if your door already has knobs, I recommend that you remove them since it is much easier than painting around the knobs. If you wish to keep the knobs on, use painter’s tape to cover the knobs and the hinges on your cabinet. The door hinges are made with a utility knife, which I delicately trace the exterior of the hinge with while cutting the tape as I go: For older doors, the first step is to fill up any gouges or defects with wood filler and sand those areas until smooth (I use 150 grit sandpaper for this), and then gently sand the whole door with fine grit (220) sandpaper before painting it.

See also:  How Much Should I Expect To Pay For Interior Painting

Note: If your door was previously painted before to the 1980s, it is possible that the paint contained lead, which you would not want to sand without taking adequate care to avoid exposure to lead.

The following step is to prime your doors if they are required.

  • Suppose you’re dealing with a brand new door that hasn’t been primed yet. You’re painting a door with a conventional latex paint over a door that was previously coated with an oil-based paint, and you’re having trouble. What is the best way to tell if your door has been coated with oil-based or latex paint in the past? Using an old rag, soak it in rubbing alcohol (I use an old black cloth if it’s white paint so it’s easier to notice) and rub it against your door — if paint comes off on your rag, it’s latex
  • If it doesn’t, it’s oil-based.

If any of the following conditions are met, there is no need to prime:

  • The doors you’re dealing with are brand new and pre-primed. You are painting over latex paint on a door that has already been painted over with latex paint
  • It appears that you are applying Benjamin Moore Advance paint over a previously painted door
  • This paint can be applied over latex or oil-based paint and is excellent at not leaving roller or brush traces, making it my go-to paint for trim and doors.

Priming should be done in the same order (edges first, etc.) as painting (as I’ll discuss in more detail below).

3. Paint Your Paneled Door in This Order

It’s time to get to work painting! However, while many people have success painting doors with only a brush, I like to use a combination of a brush and a tiny roller since it allows me to do the work much more quickly and with a much more smoother finish. Rather of just painting the door from top to bottom, paneled doors might benefit from being painted in a certain order in order to get the greatest paint finish. The following is the sequence in which the panels should be installed on a conventional 6-panel door: 1.

  • 2.
  • My preferred method of painting the recessed molding portions is with a 1 1/2-inch brush, followed by a 4-inch roller for the flat surfaces in the middle.
  • 3.
  • 4.
  • 5.

4. SandRecoat

Allow the paint to dry (if you’re working with Benjamin Moore) when you’re finished. Please keep in mind that it will take longer to cure than usual), give your door a fast, very light sanding with 320 grit sandpaper, wipe the sanding residue with a tack cloth, and then add a second coat of paint. Use sawhorses to paint one side of the door at a time. Allow at least 24 hours for the paint to cure before flipping the door over on its sawhorses and continuing the process for the other side. Cover your sawhorses with a towel to prevent the freshly painted door from adhering to them during installation (and make sure that the cloth you use is smooth with no texture to it, or you could end up with a textured pattern in your door once it comes of the sawhorses).


However, I hope you’ve gained some useful information to use on your next door painting endeavor. Please let me know if you have any more queries! In addition, if you want to be sure you can locate this post again in the future, you may pin the image below: XOXO,

Spray Paint vs. Brush Hand Painting on Interior Doors

Painting your interior doors is a simple and inexpensive method to bring new life to your house. The addition of a fresh coat of white paint to your home may bring it into the current day, while a splash of color on your inside doors can match your design style. It is also a cost-effective solution for those who are new to home remodeling projects. An in-depth approach on painting inside doors with spray paint as opposed to brush techniques is provided below. This post may include affiliate links, which means that if you make a purchase through one of these links, I will receive a tiny fee at no additional cost to you.

What is the best way to paint interior doors | Spray paint vs. brush?

When we first moved into our house, the orange honey oak wood doors took my breath away. Honey oak may be found everywhere! This popular wood hue from the 1990s was used on the trim, doors, floor, mantel, railings, and walls of the house. Despite the fact that I appreciate the warm wood tones, I didn’t enjoy them to the same level as others. It was a case of wood overkill. With the use of paint, we have gradually eliminated the honey oak hue over the previous three years. You may get a glimpse of some of that process by reading the articles listed below.

  • How to Make a House Look More Modern by Painting the Trim
  • The Best Way to Paint Windows Without Using Tape
  • Techniques for Painting Trim Without Using Brush Strokes Instructions on how to paint inside doors with a paint sprayer

Our honey oak doors are the final piece of wood to be found! It is important to note that these doors are quite robust and properly constructed. It didn’t matter to me that the 6 panel door is less fashionable than more contemporary interior doors; I wanted to preserve them because of their outstanding quality. So, in order to bring them up to date, I painted them! I’ve painted doors in a variety of methods, including spray paint, hand brushing, and rolling. As a result, I’m frequently asked what the best method is for painting inside doors.

What kind of paint do you use on interior doors?

No matter what type of painting you choose for your doors, there are specific preparation activities and supplies that will provide the greatest possible finish for your doors. Choosing the right sort of paint for your interior doors may make a significant impact in the overall appearance and long-term durability of the doors. Before Many individuals are apprehensive about painting inside doors because they don’t want to deal with the hassle of chipping and maintaining the paint. However, employing a high-quality paint and thorough preparation can provide you with a gorgeous finish that will last for years with no maintenance.

Best Paint for Interior Doors and Trim

The best paint for interior doors is identical to the paint I would use on the trim in my home. Any of the types of paint listed below will work perfectly for your interior doors. They each have their own set of advantages and disadvantages, so the decision on which to choose for your project is entirely up to you!

Using oil based paint on doors

Oil-based paint is a very long-lasting paint choice that is ideal for use on doors and other outside surfaces. Once painted, your doors will be easy to clean, will be extremely robust, and will have the smoothest surface available on the market. The disadvantages of using oil-based paint for interior doors, on the other hand, frequently lead individuals to choose latex. Oil-based paint has a strong odor and requires more time to clean up than latex paint.

Furthermore, after you’ve painted using oil-based paint, you shouldn’t paint overtop of it with latex paint since it won’t adhere properly. You’re ready to go as soon as you’ve decided on an oil-based paint for your doors.

Using latex paint on doors

However, many high-quality latex paints will produce excellent results, although oil-based paints will produce the smoothest finish owing to their longer drying period! Due to the continuous advancement of the painting business, latex paints are becoming more versatile and durable than ever before. If you decide to use latex paint, make sure to select a manufacturer that is well-known for producing high-quality paint. After that, try using a latex paint conditioner such as Floetrol to give the paint an extra smooth surface.

Using ceramic enamel or urethane alkyd paint on doors

I’ve grown to appreciate the look of ceramic enamel paint on trim and baseboards, and this has extended to the interior of doors as well. It is available in two finishes: semi-gloss and satin, and it dries to a strong, lasting finish. It dries rapidly and is simple to clean up after. It was our painting contractor who first introduced me to this sort of paint two years ago, and it has since become my go-to pick for places where I require exceptional durability. Another product that is comparable is Urethane Alkyd Semi-Gloss Enamel.

It is one of the most durable coatings available, and it may even be applied to metal surfaces.

Using cabinetdoor paint on doors

Of course, nowadays, paints are available for practically every surface and may be applied to almost any surface type. Don’t discount the importance of using a paint that is designed exclusively for cabinets and doors. Designed primarily for heavy activity areas, these products provide excellent clean up and a long-lasting finish in one application. The Magnolia Cabinet and Door Paint, which I purchased from Ace Hardware, was the perfect choice for my inside doors. Gatherings is the color of our front door.

In these pieces, you can see how I painted my complete kitchen to give it a fresh look.

  • How to Paint a Tile Backsplash
  • How to Paint Kitchen Cabinets
  • How to Paint a Tile Floor

What is the best paint finish for interior doors?

After you’ve decided on the sort of paint you want to use, you’ll need to decide on the type of finish you want for your doors. If you are painting inside doors, I do not advocate using anything other than a semi-gloss finish. High traffic areas benefit from semi-gloss or gloss finishes since they have the highest durability. When it comes to enamel or alkyd paints, some of them may be available in a satin finish, which would be the next best alternative if you are strongly averse to a glossy finish.

This section provides an overview of all of the paint finishes available, as well as information on how to apply them.

Cost to Paint Interior Doors

I enjoy low-cost tasks that have a great impact, and painting interior doors is one of my favorite projects to complete!

Paint is an extremely inexpensive way to update a home, and it is highly cost-effective when compared to other types of home repair initiatives. If you want to paint inside doors and trim beyond the entryway, the cost of painting interior doors and trim is determined by the following factors:

  • The number of doors you are painting
  • The type of paint you pick, as they are all priced differently
  • And the time frame you have to complete the project. It doesn’t matter if your doors are previously painted or not. It is possible that you will not need to purchase primer if they are already painted. The method of painting that you pick, such as spray paint vs brush. Spray painting consumes far more paint than brush painting. Materials that are already in your possession

Given that I paint frequently, I already have a paint sprayer, brushes, and supplies for the preparatory work. I spent less than $100 on supplies for painting 11 doors, including 1 gallon of primer and 1 gallon of paint, as well as a deglosser. You should expect to pay anything from $100 to $400 (or more if you require a sprayer!) to paint a large number of doors, depending on all of the considerations listed above.

Painting Indoor Doors | Prep Steps

When it comes to painting interior doors, proper preparation is vitally critical. The preparatory stages are the same whether you are using spray paint or a brush and hand painting the project. The first step is to properly clean your doors with soap and water, as described above. Alternatively, if your doors are really unclean or grungy, a harsher cleaner such as TSP might be used.

Do I have to sand a door before painting?

Is it necessary to sand before painting? That is the million-dollar issue. I get what you’re saying. Sanding is a chore that no one enjoys. It takes a long time, is laborious, and is a mess! Sanding, on the other hand, is a vital stage in the painting process. It is effective in removing glossy and slick surfaces while also providing an excellent surface for painting. However, if you’re like me and live in a climate with long winters, sanding outside may not always be the most convenient alternative.

This is a less time-consuming alternative to sanding.

See also:  What Is Interior Trim

That’s all there is to it!

One you have finished deglossing or sanding the doors, make sure to wash them down once more to ensure that any residue has been removed.

Priming Interior Doors | Necessary for both Spray Paint vs. Brush

If you are painting over wood that has never been painted before, it is critical that you prime the doors first. It is recommended that you use an oil-based primer, or something with great coverage such as Kilz 3 if you don’t want to deal with oil-based products in general. Even if you are painting a door that has previously been painted, you should consider using a primer. If you are moving from a dark color to a light color, priming will allow you to get greater coverage with fewer coats of paint than you would otherwise get.

Can you paint a door without removing it?

Short and simple answer: “Yes!” While your door is still on the hinges, you may paint it if you are using a hand brush to apply the paint on it. Remove the hinges from the door and cover them with painter’s tape to prevent them from being painted unintentionally. Then, for the same reason, you can choose to tape or remove your door knobs and latch plates if necessary. While I was painting my inside doors, I decided it would be a good idea to also replace our door hinges and door knobs.

It seemed like the perfect opportunity! With the iconic 90s style glossy brass hinges and knobs that were scratched all over the place, we were in for a treat. Consequently, I picked these stunning matte black hinges and knobs to bring our doors up to date with the latest fashion!

  • Passage Knob with a lock
  • Privacy Knob with no lock
  • Privacy Knob with lock
  • The hinges should be matte black (be careful to figure out what kind hinges you presently have so that the new ones will fit! )

Spray paint vs. brush methods

And now we come to the crux of the matter: is it preferable to spray paint my inside doors rather than brush or hand paint them? To be honest, there are advantages and disadvantages to both! In order to avoid saying which is superior than the other, I’ll tell you the breakdown and leave it to you to make the decision. After that, I’ll give you some pointers on how to use both ways effectively.

Hand painting interior doors

Hand painting interior doors is simple, but it takes a lot of time. It lets you to paint the doors right where they are without having to move them to a location that is suitable for spraying, and it is a practical method to paint a small number of doors or a small number of doors at a time.


  • It is convenient for individuals who do not have access to a paint sprayer. For 1-3 doors, it is simple and quick to do
  • Preparing a setting for painting takes less time and effort.


  • If you have a large number of doors to paint, this will take a long time: Hands-on time should be 30-40 minutes per door, per coat. It is more difficult to get a smooth finish. It is time-consuming and stressful.

What type of brush is best for painting doors?

If you decide to hand paint your doors, make sure to follow the instructions above for selecting the right supplies and preparation. I prefer to use a 2 inch angled brush with a short handle for this task. I use this brush to paint doors and trim since it is my favorite.

How do you paint interior doors without brush marks?

I just created a full post devoted to the topic of painting trim without leaving brush strokes. The same techniques may be used to paint doors as well! You may read the complete story by clicking on the link below. But here are a few pointers for painting doors without leaving brush traces.

  1. Paint in tiny parts to save time. This is especially true when painting a six-panel door. Consider the door from a third-person perspective. Finish the bottom two panels before moving on to the flat areas. The center panels should be completed next, followed by the middle flat surfaces. After that, finish the upper panels and then go on to the flat areas. Finish by painting the flat surfaces and edges of the vertical side of the door and the door frame. Don’t overbrush the area. When painting, paint is intended to self-level
  2. Therefore, if you brush through it too many times, it will become thin and display each brush stroke more prominently. Do not use a brush to apply paint on partially dried paint. Always begin at the top of your stroke and work your way all the way down to the bottom, feathering out as necessary. Adding additives to your paint, such as Floetrolin latex paint, can assist to keep your paint wet for a longer period of time, making it simpler to work with.

Spray Painting Interior Doors

Both spray painting and brush painting interior doors have advantages and disadvantages. It is significantly more efficient for the actual painting, but it necessitates more preparatory time. Apart from that, maintaining and cleaning your paint sprayer is incredibly crucial and time-consuming.


  • A very quick painting method: 3-4 minutes hands-on time per door for each color
  • If you use a high-quality sprayer, the finish will be smoother.


  • Preparation takes a long time
  • Paint sprayers are notoriously unreliable and prone to clogging. Cleaning up after the sprayer takes a long time

How to Prep for Spray Painting Indoors

The majority of my spray painting is done indoors, just as I do with my sanding. When I used a paint sprayer on my closet doors as part of this job, I was able to transfer them to the outside. If you are able to paint outside, your preparation work will be far less time-consuming! Painting inside requires a significant amount of preparation on the part of those of us who must do it.

  • Cover any surfaces within 10 feet of your spray area with plastic to prevent stains from forming. Everything: the floor, the ceiling, the walls.everything! Paint particles can travel, so be sure you overcompensate with your protection. Make sure all of the corners of your plastic are taped down so that they don’t float. Paint sprayers may use air to spray the paint, and this draft can cause lightweight plastic to float, resulting in a ruined paint job. While painting, spray in a well-ventilated area and use a suitable mask and eye protection to keep yourself safe.

How to Spray Paint Interior Doors

Spray painting inside doors is pretty similar to how I use a can of spray paint, which is to say it is extremely comparable. All of the action revolves around the paint velocity and continuous motion. However, here are the highlights of this instruction on how to use a paint sprayer on interior doors, as well as examples of both a good and a terrible spray painting work.

  1. Begin by practicing your spray technique on a scrap piece of wood to become familiar with the movement and correct velocity
  2. Cleaning your sprayer nozzle occasionally while spraying can help to prevent it from being clogged, which may result in spots and an uneven finish (see illustration below). Start your spraying away from the door and gradually work your way onto it, moving in a continuous manner up and down the door with a short gap between each pass. Do not stop moving while the paint is still wet on the doorframe.

Spotting is caused by a clogged spray painter. There are a variety of reasons why your sprayer may begin to spit rather than spray, including the following:

  • A clogged nozzle
  • Improper cleaning, resulting in bits of material passing through
  • Too thick of a coat of paint Incorrect settings for pressure and spray pattern

What is your conclusion: spray paint vs. brush?

What is your conclusion now that you know all of the information? My personal preference is for the quickness of spray painting, but the comfort and convenience of hand brushing is what I prefer the most of the time! Furthermore, it is convenient that it may be done on the hinges if a door is difficult to move, as ours is.

Stay Connected

Thanks for reading, and I hope you found this topic about spray paint vs.

brush painting doors to be informative. Make sure to share this post and save it to your Pinterest board for when you’re ready to paint your doors! These 15 basic DIY home repair ideas are perfect if you’re seeking for more cheap solutions to modernize your residence.

What Best Paint Finish For Interior Doors?

Are you getting set to paint the interior? The ability to identify the most appropriate paint finish for interior doors is critical when painting a house. It’s important to know for a variety of reasons, but it’s especially important to know so that you don’t end yourself painting inside doors again anytime soon. Each and every one of the traditional paint manufacturers that sell paint today produces a paint finish that is especially developed for interior doors and trim. Semi-gloss is the term most commonly used to describe this type of paint finish.

  1. Having a glossier surface makes cleaning simpler, since it allows for more scrubs to be used without damaging the real paint covering itself.
  2. Hands generate a great deal of traffic, necessitating regular cleaning with a sponge and mild detergent, or just wiping down with a moist wiping cloth to remove dirt and grime.
  3. Semi-gloss, gloss, and high-gloss acrylic latex paints have a shine that allows for easy washing, wiping, and dusting.
  4. Using a furniture polish such asPledge® or Scott’s Liquid Gold after washing a glossier paint finish is also possible.
  5. Because interior doors are constructed of a tougher material than walls themselves, semi-gloss, gloss, and high-gloss paint finishes are more effective at preserving these surfaces, especially in areas that see the greatest usage.
  • More scrubs are possible with semi gloss
  • Doors are comparable to furniture in that they cover greater regions. Polishes and waxes will adhere to glossy door surfaces. Doors require a more durable paint protection

Interior Door Paint Finishes

All of the interior doors in the following list are excellent candidates for semi-gloss, gloss, or high-gloss finishing options.

  • Doors for the inside include slab doors, raised paneled doors, solid wood interior doors, hollow-core interior doors, and more.

Paint with a semi-gloss finish is commonly used on all interior trim, which includes door jambs and the actual doors themselves. Using this finish, you will have the freedom to clean it thoroughly with a moist cloth and to dust it constantly. These huge surfaces, similar to furniture in the interior, tend to gather dust, necessitating regular cleaning, and a semi-gloss or high-gloss paint finish is recommended.

Home Interior Painted Areas:

  • Trim, moldings, baseboards, crown molding, handrails, doors, and casings are all examples of decorative elements. Walls in common living spaces, kitchens, baths, and children’s rooms
  • Ceilings in the major regions, as well as ceilings in high-moisture zones

Interior Doors Same Finish As Rest Of Trim

Every inside door that is clean, consistent, and professional in appearance includes the trim that has the same finish as the baseboards throughout your home. Because most trim is lighter in color than walls, and because trim finish is a glossier finish than walls and ceilings, it draws attention to the most significant elements. As for the color of the trim, it is usually the same color as the ceilings, but with a distinct glossy finish on the paint applied to it.

Ceilings that are the same color as the trim, but with a much more matte surface. Flat finishes tend to disperse or fade out, making them less obvious, but semi-gloss, gloss, and high gloss finishes do just that, drawing attention to themselves.

Semi-gloss sheen

Semi-gloss paint is another common finish that is often used. It has a sheen to it, but is on the duller side of things in comparison to gloss. This sheen is extensively utilized on most wood trim surfaces in the home, particularly on the doors and windows. Baseboards, doors, window ledges, handrails, cabinets, and other similar items are considered trim surfaces. This semi-gloss paint is available in an almost limitless number of colors, making it ideal for cleaning on a weekly or monthly basis.

Gloss paint sheen

If you want to draw attention to it, you should paint it with a gloss finish. Baseboards are made to stand out, doors are polished, and kitchen cabinets are brought to life. Because every standard becomes evident, it gets more difficult to utilize. This is precisely why we like to use gloss or high gloss paints when we spray them. Gloss paint sheen is also available in an endless number of colors, and it is employed in the majority of different types of paint formulas, including acrylic latex enamels, because of its versatility.

A List Of Preferred Professional Paint Suppliers

Leave a Reply

Your email address will not be published.