How To Install Interior Shutters Outside Mount

Inside or outside mount on plantation shutters

The first step in constructing your bespoke fantasy plantation shutters is to take exact measurements of your window openings. We make it simple to do so, even for first-timers, by providing PDF or videomeasuring guidelines that may be downloaded. However, before you begin, you will need to choose whether you are measuring for an interior mount or an exterior mount installation. The following are some useful pointers to get you started in the right way!

What is Inside Mount vs Outside Mount

It is important not to get mixed up between interior and exterior shutters; we are only talking to interior shutters for inside mounting and interior shutters for outside mounting. Within a recessed window opening, interior mount shutters are measured to ensure that they will fit. If your window is sufficiently spaced from the wall to allow the shutter frame, you may want to try an inside mounting solution. Inside-mount shutters that were specifically designed for this unique window form. You may measure the depth of your recess starting at the edge of your wall or window trim and working your way back toward the glass (or first obstruction such as a crank handle, alarm sensor etc.).

To calculate the depth of your recess, take a measurement from the window to the wall or edge of the trim (does not include any projecting sill or ledge at the bottom).

Direct mount plantation shutters are another term that may be used to describe this type of shutter.

In order to verify that the shutter frame will fit as an exterior mount, you will need to consider the width of the frame in your measuring process.

Using the frame templates from our exterior mount guide will assist you in visualizing where your frame will be mounted and in taking correct measurements for your frame installation.

Pros and Cons of Inside Mount

If your window is sufficiently deep, an inside mount is a common option. When installed within the window opening, inside mount shutters are flush with the wall and may be pushed back against the glass for particularly deep windows, or they can be pulled forward for windows that are not as deep. Depending on your needs, they may even be pulled out slightly past the wall to provide you with a little more depth. It is still an inside mount flush with the wall, but it has a beautiful overlapping trim around the perimeter.

In terms of measuring for an inside mount, it is quite simple and basic.

Whether you pick an L-Frame that fits entirely inside the opening, a Z-Frame with ornate trim, or even just panels, we only require the size of the window opening and we will take care of the rest!

If you have crank-out windows, they often have huge handles and locks with a lever that require lots of room to raise and lower the lock when the window is opened and closed.

When it comes to this sort of window, interior mount frames may get in the way of working the handles and locks on the window.

Pros and Cons of Outside Mount

In situations where there is a restricted recess depth or when the windows are not completely level or square, an outside mount is a fantastic option. Alternatively, our exterior mount frames may be used in place of a window molding or trim, while also serving a dual purpose by supporting the weight of your shutter panels and ensuring that everything is in good alignment. Outside mount shutters with a Deco frame that also serves as a beautiful window trim are shown in this photo. The frames can be fitted immediately on top of existing window trim if they are mounted on the outside.

  1. When you take your three measurements for width and height, if there is a significant difference between them, an outside mount may be the best option.
  2. As previously stated, inside mount shutters may interfere with the operation of tilt-in or crank-out windows.
  3. For further examples of plantation shutter mounting choices – including both inside and outside mount installations – please see our gallery.
  4. Additional blog postings are available that go into greater detail about exterior mounting, selecting a shutter frame, and which shutter designs are the most straightforward to install.

This post was brought to you by Yasmeen, one of The Shutter Store USA’s experienced shutter consultants.Contact our teamtoday for advice on your shutters. We’re here to help!

When installing plantation shutters, you have the option of mounting them on the inside or outside of the house. The inside mount is designed to fit within the recessed depth of a window opening. Using an outside mount, you may connect a window opening to the wall or trim surrounding it while leaving the interior of the recess totally clean. While many people believe that inside mounts are quicker to install and more aesthetically acceptable than outside mounts, this isn’t always the case. There are various advantages to using an exterior mount, including the following:

  • Increase the depth of the image
  • Conceal defects or gaps
  • Maintain the tilt-in feature. Avoid getting caught in a snag. It’s perfect for casement windows or patio doors. French doors should be covered. Reduce the amount of light that is blocked

Let’s take a closer look at each of these advantages in further detail.

Extend Depth

The outside mount is ideal for windows with a shallow or non-existent recess depth. In the case of an outside mount shutter frame, the shutter panels are pushed out into the room beyond the window opening. More space is provided to allow for full rotation of the slats, both open and closed, without contacting the glass.

Our frames are available in a variety of sizes and depths, allowing you to choose one that will support your desired slat size. The teal frame in this photograph is an exterior mount, which pushes the shutter away from the glass in order to provide enough room for the slats to move freely.

Hide imperfections or gaps

There’s a chance that when you measure your window opening many times, you’ll discover that it’s not completely square or level. However, depending on how much variation you have in your environment, this might make inside mount shutter installation more difficult. Using an exterior mount frame can help you avoid having to shim/caulk huge gaps in your window opening, and it will also cover any variations in the window opening. Some people like the look of ornamental shutter frames to hide up outdated trim or replace it with a new one.

An exterior mount frame can be used to completely or partially conceal existing window trim, as well as to conceal any variances or imperfections in a window opening, depending on the application.

Keep tilt-in function

If your windows can be tilted in for cleaning, inside mount frames will most likely prevent you from using the tilt-in feature. In order to avoid losing this functionality, you should consider an exterior mount. The fact that outside mount shutters are installed totally outside of the window recess means that you can easily open the shutter panels in order to gain access to the windows and tilt them in for cleaning. It is possible that an inside mount frame will prevent your window from being tilted in for cleaning.

Avoid Obstructions

Some windows have a deep recess, but they also feature impediments such as crank handles, alarm sensors, or locks that might prevent an inside mount installation from being completed successfully. In these instances, an exterior mount is the most appropriate option. When it comes to casement windows and patio doors, an outside mount is typically suggested. Even though the cranks and locks on your casement window are deeply recessed in the window, an inside mount frame can prohibit you from turning the crank or raising the lever to unlock the window while the window is closed.

Make use of an exterior mount to prevent any potential impediments such as handles and locks.

Cover French Doors

French doors have little to no recess – the glass is normally flat with the surface of the door itself. It is usually recommended to use an exterior mount for French Doors. In addition, we provide a French door cut-out to fit doors with hardware that is located near to the edge of the glass.

Minimize light blockage

When it comes to windows that are either too short or too narrow, an inside mount shutter might take up much too much space in the opening. Consider the amount of space taken up by the frame, as well as the solid top and bottom rails, as well as the solid vertical stiles on each panel. (See our glossary for additional information on these words.) When used on tiny windows, an outside mount increases the size of the shutter by allowing it to cover a larger area. As a result, the number of slats or the width of each slat may be increased, which allows for more light to get through while the slats are open.

In addition to the advantages we’ve already covered, exterior mount is more forgiving in terms of how perfect your measurements must be in order for the installation to be effective.

The most important thing is to supply us with the completed exterior measurements, which can be found in our outside mount measuring instructions.

Consider the DesignMeasuring parts of our video instructions if you are confused whether an inside mount or an exterior mount is the best option for your particular window opening. Send us a photo and we’ll get back to you with some advise from our shutter specialists. We are here to assist you!

This post was brought to you by Yasmeen, one of The Shutter Store USA’s experienced shutter consultants.Contact our teamtoday for advice on your shutters. We’re here to help!

  • Before you begin, ensure that you have the following tools: a cordless drill (preferred)
  • A Phillips head screwdriver bit
  • A knife
  • A leveler
  • And, if required, a step ladder.

Organising Your Shutters

Ideally, you should find an open spot on the floor where you can unpack and construct your shutters, which should be in front of the window you’ll be placing them in. Shutters are often packaged in at least two boxes: a smaller box containing the frame and a bigger box containing up to two shutter panels, depending on the style. Keep an eye out for red tape on your cartons. This indicates the location of your hardware (mounting screws, hinge pins, locking screws, and hinge packers) once it has been packed.

Remove your panels from the picture frame and examine it.

Lay each component out on the floor in the same manner as you would raise the frame onto the window.

To assemble the frame, you must first remove the coverstrips from the corners and corners of the frame.

Now You’re Ready To Assemble

Assemble the piece by fitting the corners together and pressing down hard so that the edges are flush with one another. It is possible that you may need to install a T post depending on the configuration of your shutters. T posts will be labeled at the top and bottom; in this example, “B” will be used to indicate the bottom of the post. After you’ve finished assembling the exterior of your frame, you may move it into position. Take care to screw into the holes that have already been created. Allow a buddy to assist you in lifting the completed frame onto the window.

  1. One screw should be used to secure the frame in place, and then use your level to ensure that the top of the frame is absolutely level.
  2. Frames may be rather heavy, and the screws at the top left and right help to support the corners of the frame.
  3. Now that your frame is in place, it’s time to install your shutters.
  4. Work your way from left to right, lifting your panels into position.
  5. Take a look at your shutters and make any necessary adjustments to the left and right so that your panels are aligned before screwing in the remainder of your frame.
  6. Your frame, on the other hand, is not, at least not until it is put in place.
  7. It is possible that some fine adjustment will be required to achieve the optimal shutter.

Once you’re satisfied with the setting, tighten the locking screw. Hinge packers also enable for careful tuning of the hinge. Loosen the panel screws and slide the panel into the space below the hinge. a. After that, it’s time to put your cover strips in place.

Congratulations!

They are now fully operational after being installed. If you’re experiencing any difficulty installing your shutters, you’ll find useful guidelines and loads more support on our website. However, please do not hesitate to contact us at [email protected] if there is anything we can do to assist you. 1300 161 650 is the number to dial.

See also:  How Much Interior Designer Charge

How to Hang Interior Shutters

The glare of the sun coming through the windows might be a bothersome distraction. Not to mention the neighbors who are more likely to be home in the evenings and spy on your brightly illuminated living room. It is possible to install blinds to keep prying eyes at bay, but swinging wood shutters would be far more intriguing to look at. Interior shutters were the first “window coverings,” and they’re still a terrific way to add architectural and historical flair to homes in the South and cities throughout the world.

Furthermore, they are simple to install on any window since they are attached to a thin frame that can either be placed within the window opening or wrapped around the outside of the casing to complete the installation.

Step 1

The glare of the sun flowing through the windows might be an annoyance. Not to mention the neighbors who are more likely to be home in the evenings and spy on your well-lit living area. It is possible to put shades to keep prying eyes at bay, but swinging wood shutters would be far more intriguing in this situation. Historically, interior shutters were the first “window coverings,” and they’re still a terrific way to add architectural and historical charm to homes in the South and cities around the country.

Furthermore, they are simple to install on any window since they are attached to a thin frame that can either be placed within the window opening or wrapped around the outside of the casing to complete the look.

Step 2

Kolin Smith captured this image. Measure the distance horizontally between the window jambs at three locations: the top, center, and bottom of the window. Vertically, take three measurements as well as horizontally. Take the smallest of the two sets of measurements and submit them to the shutter provider to have them made to fit your window perfectly. A folding rule with a sliding extension is preferred over a tape measure for taking indoor measurements to ensure the most precise readings possible.

Step 3

Kolin Smith captured this image. Set up each set of shutters on the edge, with the hinge mortises facing up and the louver-control bars pointing in the same direction as one another. ) When the shutter is hung, this ensures that all of the bars are facing the room, as well as allowing one shutter in each set to open right, while the other opens left. Insert a hinge into a mortise with a hammer. Make use of a Vix bit in your drill or driver. Place the bit in the hole created by a hinge screw. Drill a pilot hole into the shutter and repeat the process for all of the hinge holes.

Screw all of the hinges to the shutters using a Phillips-head bit in a drill/driver with a hex bit.

Step 4

Kolin Smith captured this image. Request assistance in holding an open-position shutter against a wall with its hinges turned out so that they sit within the jamb. The entire unit should be adjusted such that the hinges protrude just enough from the jamb to allow the shutter to clear the casing when the unit is parallel to the wall. Draw a line on the jamb behind each hinge using a pencil. Hold the hanging strip against the lines with your fingers. Pilot holes should be drilled through the strip and into the jamb using an 18-inch drill bit inserted into your drill/driver (one at each end of the strip and one at the bottom).

Repeat the process on the opposite side.

Step 5

Kolin Smith captured this image. Place both shutters in the window opening with the assistance of a friend, then insert shims at the top and bottom of the shutters to secure them in place. The shutters should be adjusted so that they are evenly spaced along the window frame and between the shutters. At the top of each hinge knuckle, make a mark on the case. Remove the shutters from the window.

Step 6

Kolin Smith took the photo. Placing both shutters in the window opening with the assistance of a friend will ensure that they are securely fastened at the top and bottom. Aim for uniform spacing along the window jamb and between each shutter by repositioning them as needed. Top of each hinge knuckle should be marked to indicate where the casing will be attached. Shut down the shutters.

Step 7

Kolin Smith captured this image. Before hanging the shutters, screw magnetic catch plates onto the bottom (or top) inner corners of their bottom (or top) outside corners. Make sure the L-shaped hinges of a shutter are positioned so that they fit snugly into the corner produced by the hanging strip and the window jamb when it is open. Align the top of each hinge plate with the line that runs through it. Remove the shutter from the wall and mark the screw holes once again. Drill pilot holes at the locations shown with a 1/8-inch drill bit.

Close the shutter and check to see if the light is distributed evenly all around.

When working in tight spaces, a portable screwdriver should be used instead of a drill/driver.

Step 8

Kolin Smith captured this image. A catch magnet should be attached to the metal plate of the shutter. To ensure it is flush with the front of the window, close and align it with the shutter. Mark the position of the magnetic catch’s screw holes on the windowsill while it is sitting on the window sill. Remove the catch from the shutter and place it atop the markings on the sill to complete the installation. Make use of a Phillips-head screwdriver to attach the catch to the sill.

Repeat the process with the other catch. Observe this: When a shutter (or door) is closed, it is properly aligned if the two halves of each of its hinges rest fully and squarely against each other when the shutter (or door) is closed.

Learn How to Install Plantation Shutters

New shutters may be installed quickly and easily with the help of Blinds.com. Installing plantation shutters is simple if you follow our How to Install Plantation Shutters tutorial step by step. Locate a Qualified Individual Click here to choose a professional, and we’ll assist you with the installation! You’ll Require a Few Tools

  • Toolkit includes: steel measuring tape, pencil, level, step ladder (if necessary), and other supplies. Screwdriver or power drill (with a 14-inch hex driver and drill bit)
  • Hammer
  • Hammering iron

Helpful Hints Before You Begin Installing Plantation Shutters:

  • Step ladder (if necessary)
  • Steel Measuring Tape
  • Pencil
  • Leveling Tool
  • Hammer
  • Screwdriver or power drill (with a 14-inch hex driver and drill bit)

How to Install Inside Mount Plantation Shutters

In the event that you have determined that you need inside mount Plantation shutters, follow these basic installation steps:

  1. Locate a large enough area to work in to build your frame, preferably in front of your window opening. Make care to lay out frames and strips on carpet or blankets to avoid scratching them, and make sure to match the corners of the frames and strips to guarantee perfect fit Using the key, assemble the frame by inserting it into the pre-routed slots on the rear of each frame. The frame should be centered and leveled on the inside of the window opening. If you’re using hang strips, position them in the center of the aperture and connect them to both sides of the opening. Make certain that they are adjusted so that the panels are as near to flush with the wall as feasible. Using the pre-drilled holes in the top left and right corners, as well as a third hole in the top middle, screw three times into the wall until the frame is level and level. This will help to guarantee that the top of the frame is square and straight
  2. Inserting the hinge pins into the panels will allow them to be attached to the frame. Check for any holes and put your shutters through their paces. Open and shut the panels, making that there is adequate clearance between them and that they are properly aligned. If any modifications are required, the side frames should be moved back and forth. Using extra screws through the pre-drilled holes, fasten the frame after your shutters are evenly spaced and there are no gaps. Attach the button catch to the window frame by positioning it on the lip of the frame, 12″ from the inner edge of the stile’s inner edge. Insert and screw the catch into the frame
  3. Slide the strike plate onto the catch and close the panel to establish the proper placement of the strike plate. Make a pencil mark on the panel to indicate where the button should be located. In order to properly install the button, it should be positioned 12″ from the inside edge of the stile. Take it out of the catch and screw it into the panel

How to Install Outside Mount Plantation Shutters

In the event that you have determined that you need outside mount plantation shutters, follow these basic installation steps:

  1. Locate a large enough area to work in to build your frame, preferably in front of your window opening. Make a layout of the frames and strips, and make sure the corners of the frames and strips match up properly. Using the key, assemble the frame by inserting it into the pre-routed slots on the rear of each frame. Place the frame on the exterior of the window aperture where the shutters will be put and level it with the surrounding wall. Using the pre-drilled holes in the top left and right corners, as well as a third hole in the top middle, screw three times into the wall until the frame is level and level. This will help to guarantee that the top of the frame is square and straight
  2. Inserting the hinge pins into the panels will allow them to be attached to the frame. Check for any holes and put your shutters through their paces. Open and shut the panels, making that there is adequate clearance between them and that they are properly aligned. If any modifications are required, the side frames should be moved back and forth. Using extra screws through the pre-drilled holes, fasten the frame after your shutters are evenly spaced and there are no gaps. Attach the button catch to the window frame by positioning it on the lip of the frame, 12″ from the inner edge of the stile’s inner edge. Insert the catch into the frame using a screwdriver. Close and lock the panel after placing the strike plate on the catch to identify the correct place for the strike plate to be used. Make a pencil mark on the panel to indicate where the button should be located. In order to properly install the button, it should be positioned 12″ from the inside edge of the stile. Take it out of the catch and screw it into the panel
See also:  How Much Does An Interior Painter Cost

Featured Products

There are several customization possibilities available with plantation shutters, ranging from louver size to unique colors and even the finish of your shutter hinges. It doesn’t end there, either! Making the option between inside mount shutters and outside mount shutters is just one of the many considerations you’ll have to make as you progress through the design process. However, as specialists in bespoke interior shutters, our objective is to make that decision as simple as possible for our customers.

The Difference Between Inside and Outside Mount Shutters

Outside-mounted shutters, such as those shown in the photo below, are installed on the wall around the window. When the shutter frames are installed, they will stick out from the wall, giving the area around the windows a trimmed appearance. Outside Installation of Mounted Shutters over the window casing Unlike outside-mounted shutters, which are recessed within the window frame and fastened with hanging strips, inside-mounted shutters are permanently fixed to the window frame. While the objective of this design is to have the shutters flush with the window casing, clients are frequently unsatisfied with the finished appearance as well as the functional limitations that inside mount shutters impose on their home.

Are Inside Mount or Outside Mount Shutters Better?

Plantation shutters are constructed in a completely square manner. Even though they are meant to be, the frames of your windows are not always that way. Despite the fact that many new homes are being built, windows typically have discrepancies in their frames. Check it out for yourself by measuring the distance between the side frames at a variety of vertical locations. Then, at various times throughout the process, measure the distance between the top and bottom frames again. If the dimensions deviate at any point, this indicates that your frames are not precisely square.

Inside mount shutters are put inside of uneven window frames, allowing your precisely square shutters to blend in seamlessly.

Any irregularities in the design of your windows are concealed rather than highlighted by outside mount shutters since the shutter’s frame covers rather than draws attention to them.

The shutter frame, on the other hand, is a shallow box that is created around the shutter panels.

Acadia’s plantation shutter frames are also intended to blend in flawlessly with your window casing, making it practically hard to discern where the casing ends and the frame begins on your windows.

Windows with Tilt-In Capabilities

For those of you who have just purchased new windows, you are probably aware that many of them are now equipped with a tilt feature, which allows you to open the window inward. This is done in order to provide homeowners with convenient access to the external glass for cleaning purposes. Because inside mount shutters are recessed into the window frame, they are unable to tilt inward due to the construction of the window frame. As a result, external window glass would have to be cleaned from the outside, which would be a major hassle for large windows and windows that were not positioned on the ground level.

This is possible because the shutter frames are positioned above your window casing rather than in front of your actual window, allowing the windows to open inward.

Maximize Your View

As previously stated, outside mount shutters produce a framearound the window, whereas inside mount shutters build a framewithin the window, as seen in the illustration above. This means that when you open your outside mount shutters, you will be able to enjoy entirely clear views of the outside world. Inside mount shutters, on the other hand, are designed to cover the whole circumference of the windows themselves, obstructing a portion of your outside views and perhaps obstructing some of the available natural light.

“But I don’t like how the frame sticks out from the window.”

Plantation shutters, no matter how they’re installed, require a certain amount of space between their panels and the windows themselves to allow the louvers to move between the open and closed positions without striking the glass. The greater the size of the louver you pick, the greater the amount of clearance you’ll require. We realize that you may still be on the fence regarding outside mount shutters and are uncomfortable with the idea of having a frame around your window in the first place.

Many of our customers are undecided about whether to install shutters on the exterior or on the interior of their homes.

The majority of our interior shutter photographs show shutters that are installed on the outside of the house, since most of our clients pick this design after considering the above advantages and disadvantages with their consultant.

When you look at these photographs, you’ll notice that your eyes aren’t pulled to the frames in the traditional way. As a result, they are drawn to the shutters, which is a direct effect of the outside mounted frames giving the house a more polished appearance.

The Bottom Line

We have found that shutters mounted on the exterior of a building are the most popular installation option by far. Rather of highlighting defects in your window frames, they serve to conceal them. When the windows are open, their design does not prohibit them from tilting inward, and they provide uninterrupted views. As experts in the design and installation of bespoke plantation shutters, we are well-versed in the construction of both inside and outside mount shutters. Due to this knowledge, however, we are not in the business of “yes-ing” our clients.

If you have any further questions about inside mount and outside mount shutters, please don’t hesitate to contact us.

Follow us for updates, special offers, and more!

We have found that shutters mounted on the outside of a building are the most preferred option. Flaws in your window frames are concealed rather than accentuated by these window treatments. When the windows are open, they provide unimpeded views since their design does not prohibit them from tilting inward. As experts in the design and installation of bespoke plantation shutters, we are well-versed in the construction of both interior and exterior mount shutters. However, it is because of our experience that we are not in the business of “yes-ing” our clients.

Our knowledgeable staff is here to answer any more questions you may have about inside and outside mount shutters.

Shutter Tip:

In certain cases, it is difficult to read a tape measure while measuring the interior of a window. 2. 10 inches is the distance measured from one side of the window to the other, and a small trace on the window sill indicates this distance. Afterwards, take a measurement from the opposite side to the same mark as before. Naturally, you’ll want to add an additional 10 inches to that amount for the final measurement. Do you have second thoughts about taking the exact measurements? We recommend that you first measure yourself and then have a second person measure you.

It’s never a bad idea to follow the most basic guideline in building.

A better fit and easier installation will be achieved with custom shutters that are produced to a 1/16 inch tolerance.

Window Shutter Sources

House on ShutterLand’s exterior Decorative shutters for the outside available in fixed-louver, raised-panel, bahama, and boardbatten styles.

Vinyl and composite shutters are also available. Shutters can be purchased and ordered online. Shutters are custom-made to order and delivered directly to the customer.

How to Install Interior Shutters

Interior Shutters are being installed. Home design and remodeling ideas to get you started. Window shutters have evolved from being a functional need to becoming more of an architectural accent for the majority of us. Blinds are a fashion accessory that may be worn with or without jewelry, yet their origins are primarily practical in nature. These window coverings have been in use for generations, first on the inside and subsequently on the outside of buildings. We picked plantation shutters as our interior installation example since they are the most common type of shutter available.

Those we chose are in a fixed position; others have slats that can be adjusted, allowing for more exact control of the streaming sunlight that enters the room.

Tools for Installation

  • A tape measure, a nylon or polyester paintbrush (if you’re painting), a lightweight power drill, and a screwdriver are all necessary tools.

Materials

The majority of do-it-yourselfers acquire shutters from a home improvement store or online. Standard-size shutters from a home store are the most cost-effective option if budget is your major consideration. Alternatively, you may place a bespoke order in person, via phone, or through the Internet. Shutters can be installed either within or outside the window frame, depending on the situation. Using the inside-mounting approach, the units are placed within the frame using two hinges that are attached to the jambs, resulting in a tight fit.

2. Measuring

Regardless of the mounting technique chosen, the first step in the procedure is to take measurements of your windows. When installing an inside mount, measure from the sill to the top of the jamb on the inside. When measuring the width, measure from jamb to jamb twice, once approximately one-third of the way up from the sill and once about one-third of the way down from the top of the frame, starting at the bottom of the frame. If the window opening is not square, you may either trim the shutters or insert a shim of tapered wood under the hinges to make the window more square.

Measure the height and breadth of the space that you wish to cover with shutters before purchasing shutters.

If the surface of the casing is sloping, you should butt a block of wood against the casing to level it off.

It is possible that you will need to acquire four or perhaps six thin shutters that will be hinged together if your windows are more than three feet wide.

3. Painting

Shutters are available in a number of different finishes. Our shutters were unfinished, which allowed us to paint them to achieve the precise hue we desired.

Before painting or doing any other finishing work, check that the bespoke shutters are a proper fit by holding them up to the window. Allow for an additional day of drying time after applying any finish before installing it to ensure that finished surfaces are completely hardened.

4. Hinging

It is possible that your shutters will not come with screws or hinges. Otherwise, they are widely accessible at home improvement stores. Before attaching the hardware, put the shutters on the floor in front of the window to ensure that everything is installed correctly on the first try. Attach the hinges about 4 inches down from the top and 4 inches up from the bottom of the door frame. It is always advisable to drill pilot holes at the locations where screws will be fastened, taking care not to drill through the shutter frame entirely.

Drill until you reach the depth of the tape and then stop.

5. Marking

Holding each hinged shutter in place while connecting it to the frame will allow you to establish where pilot holes will be drilled to accommodate the hardware. It is necessary to have a little space between the shutter and the window frame at both the top and bottom of the shutter. Pulling the shutters forward sufficiently to allow them to swing freely is a good idea. Pilot holes should be drilled at the locations designated for hinge holes.

See also:  How To Make Money As An Interior Designer

6. Mounting

Simply raise the shutter and insert the screws into the pilot holes at the top and bottom. Drill pilot holes first before installing a latch, taking care not to drill through the shutter frame this time. You’re finished after the hardware is attached.

Inside vs Outside Mount Plantation Shutters

Once you’ve made the choice to have plantation shutters installed in your house, there are just a few specifics that need to be worked out before the shutters can be installed. Choose between inside and outside mount plantation shutters as one of the many design elements available. Inside-mounted shutters are installed between trim pieces and will extend beyond the trim if the depth of the shutters is less than or equal to 4 inches. Shutters that are fixed on the outside of the wall around the window are installed.

In most circumstances, though, there will be one solution that will work better for your window than the other two alternatives.

There are a variety of factors contributing to this.

When to use outside mount plantation shutters

  • A tilt-in window for cleaning, for example, will be hindered from tilting when it strikes the window frame if the window is mounted on the inside. This refers to the depth of your window casing. Your choice of window style
  • An inside mount for a double-hung, casement, or slider window does not result in a shutter projection flush with the drywall in these cases. The louvers are mounted on the outside of the window so that they can open and close without colliding with the glass or the wood grids in the window.

When to use inside mount plantation shutters

When the windows are drywall return, the inside mount method is the most effective. Typically, a metal window is used, and there is no trim around the window; the depth from the border of the drywall to the window is around five inches. In this situation, the shutter would be flush with the Drywall, and it would be fitted in this manner. Throughout the last 30 years, we have assisted our customers in making important decisions such as whether to install plantation shutters inside or outside the home.

Our shutter specialists can assist you in determining which mount is best for your new house shutters by assisting you through the process. Please contact us immediately to explore the alternatives for your new plantation shutters for your house.

Plantation Shutter Installation

Have you considered putting in plantation shutters on your home’s windows? The use of window film is a fashionable approach for homeowners to shield their windows from the damaging rays of the sun.

Are plantation shutters worth it?

Plantation shutters may be put in any window that requires protection, regardless of where the window is located in the home. This sort of shutter will give privacy and natural light, while also lowering heat and glare on the outside of the building. Not only do these strong panels provide an airtight barrier, but they also enable fresh air to enter your room without allowing pests or trash to get inside. It is our assurance that you will never want anything else to be installed on those lovely windows again.

You and your family will benefit from this overlap since it gives seclusion while still letting light into your house during the daytime hours, preventing your home from feeling dark while there is daylight outside.

Plantation Shutter Installation

The installation of plantation shutters requires the use of a window sweep, which may need the window sweep to be cut. The quickest and most straightforward method of installing plantation shutters is to measure the length of each sweep required for an installation and then add approximately 5″ to the total length. By simply passing these lengths over the table saw on a horizontal platform, you may generate parts that are exactly aligned with the rest of the installation. The following step involves attaching each shutter component to the side of the house where it belongs.

  • This makes it easier to attach the block along one side before going on to the other sides.
  • They go well with a broad range of décor styles, from cottage to classic to contemporary.
  • 1.
  • Take the total width of the shutters when they are fully assembled.
  • 3.
  • 4.
  • Slowly tighten the screws into their positions.
  • It is vital to examine and change the alignment if required.
  • Make a mark on the ground where the hardware will be installed.

7. Pre-drill the holes and take measurements. Attaching and testing the fixtures should be completed in step 8. To test the lock, close the latch and turn it counterclockwise. Call us at (775) 800-1332 for a free consultation and some helpful hints and recommendations.

Tips on How to Install Plantation Shutters

Custom-made plantation shutters are unquestionably the most coveted of all window coverings, and you can have them created to precisely suit the windows of your home or business. Who is responsible for the installation of plantation shutters? Even if you’re a complete novice when it comes to DIY projects, installing shutters will not take long. However, majority of our clients complete their shutter installations in less than an hour, and we are here to assist you. Just give us a call and we’ll be happy to provide some assistance.

Measure for Plantation Shutters

Inside mount shutters are plantation shutters that are mounted inside the window casing rather than on the outside of the window. They don’t go any further than the window. This is the most basic of the plantation shutter mounting methods, and it allows for the stacking of shutters and curtains to be accomplished.

Install Interior Plantation Shutters

Plantation shutters are a fantastic choice for a window decoration because of their versatility. These decorative accents work well with a variety of design styles, ranging from cottage to classical. They are also advantageous since they may assist in protecting windows and reducing allergens that are associated with cloth window coverings.

Sliding Plantation Shutters

Similar to a sliding door, sliding plantation shutters rely on a monitoring system to allow the shutter panels to skip one another as they move from one position to another. It is difficult to install this track system and to measure for it in order to ensure that the panels are the precise size and depth to match and glide on the track, even for experienced DIY hobbyists.

5 Reasons Why You Need to Install Plantation Shutters

While plantation shutters are not the most affordable window covering choice available, they are very stunning if you’re looking for something that will enhance the appearance of your home’s curb appeal. Plantation shutters are a type of window covering that is composed of louvers that are either constructed of wood or of a substance that is designed to seem like wood and are affixed on a frame. Opening and closing the louvers is accomplished by the use of a tilt rod, which is concealed either within or on the back of a window treatment.

  1. 1.
  2. Despite the fact that they can be expensive, the old adage “you get what you pay for” is undoubtedly true in this case.
  3. Furthermore, you’ll discover that they’re rather adaptable when it comes to complementing a broad selection of décor alternatives, which means that there’s a good chance that they’ll fit anything you currently have in your house.
  4. MaintenanceInterior plantation shutters require little to no upkeep in most cases.
  5. You won’t have to worry about taking down the shutters in order to undertake the little maintenance that you will need to perform.
  6. Also keep in mind that the shutters are pretty broad, which will make cleaning up a lot easier in the long run.
  7. However, this is not the case with plantation shutters, which require no maintenance and are extremely energy efficient.

It is energy-efficient.

Plantation shutters, with their excellent insulating capabilities, will aid in shielding your home from the scorching California sun.

However, they are not just beneficial during the warmer months.

4.

One advantage of plantation windows that is sometimes neglected is that they are safe for children to play in.

5.

Plantation blinds are built to be durable and long-lasting, which is one of the reasons why it makes sense to make the investment in this type of window covering in your home.

Also keep in mind that the longevity of plantation shutters means that you will not have to replace them as frequently as you would with other forms of window coverings.

At DLUX Window Coverings, we have everything you may possibly need.

We have two showrooms so that we may better service our customers’ needs.

Alternatively, you may contact (530) 550-0183 or visit us at 10001 Soaring Way Ste 120 Truckee, CA 96161. You may also reach out to them at 770 S. Meadows Pkwy.112, Reno, NV 89521, or by phone at (775) 800-1332.

Inside or Outside Mount Window Treatments – Stuart, Jupiter FL

The installation of your window coverings by a professional assures that they will perform just as you expect them to. Measurement and preparation prior to purchasing your blinds or shades are essential for a successful installation. For example, are you thinking about an interior or an exterior installation? At Treasure Coast Window Fashions in West Palm Beach, we collaborate with customers to identify the most appropriate installation standards for their windows. Among the factors we take into consideration are the following:

  • Please tell me the depth of your window opening or casing. Do your windows have a crank handle or do they pull up? In the area around your windows, what style of molding do you have? You should consider how much space you have around the molding.
Honeycomb Shades – Inside Mount Honeycomb Shades – Outside Mount

Our window treatment professionals will be able to narrow down the types of new window treatments that will work best for you based on the information you provide, including whether or not they should be mounted inside or outside your window frame.

Installing Blinds and Shades – Inside Mount

The most typical method of attaching window coverings is from the inside. The following are some of the advantages of putting window coverings within your window:

  • Installing window coverings on the inside of the glass is the most common method. Window coverings mounted within your window offer the following advantages:

Installing Blinds and Shades – Outside Mount

Specific situations call for the installation of window coverings on the outside of the window. An exterior mount may be used to cover the whole window, giving it a more consistent appearance. Take into consideration this outside mount when:

  • You cannot install a blind or shade within your window because the depth of the window is insufficient. The blind or shade should be completely removed from the window when it is lifted. An blockage has been discovered within the window frame. You have a window with an unusual or irregular form
  • The window trim is something you don’t want to be visible. The installation on the inside would interfere with the operation of a window crank handle or an alarm sensor. You desire complete solitude with no light leakage

Window Treatment Installation

You cannot install a blind or shade within your window because the depth of your window is insufficient. When the blind or shade is lifted, you want it to completely cover the window. a foreign object has been found in or around the frame of the window Suppose you have a window with a distinctive or irregular form. The window trim is something you don’t want to be seen. The installation on the inside would interfere with the operation of a window crank handle or an alarm sensor; There is no light leakage and you desire complete seclusion.

Leave a Reply

Your email address will not be published.